You are on page 1of 2

View Form https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?fo...

M/s. Abdul Hakim

Bill of Quantities

Bill of Quantities

Unit Total
Unit Total
Price Price
Price Price
ItemNo Group ItemCode DescriptionofItem MeasurementUnit Quantity
In In
In Words In Words
figures Figures
(BDT) (BDT)
(BDT) (BDT)

Supply and installation


of electrolytic
annealed copper/PVC
single core green
earth continuity
conductor along with Eight
cable in pre-installed Four Thousand
conduit/cable tray Hundred Two
Electrical
1 8.07.2.3.6 including connection m 20.000 411.001 and Eleven 8220.020 Hundred
Works
to various metallic point Zero and Twenty
parts etc. all complete Zero One point Zero
as per drawings, Two
specifications and
direction of the
Engineer of the
following : HDBC wire
2 SWG

Supplying, fitting and


fixing of single
lightning arrester on
the top of the building
300mm long 10mm One One
dia copper rod and Thousand Thousand
clamp with bolts and Five Five
Additional 3mm mounted air Hundred Hundred
2 la.rod each 1.000 1548.001 1548.001
Item spike. Top of the and and
lightning arrester Forty-Eight Forty-Eight
should be soldered point Zero point Zero
and other fittings Zero One Zero One
required etc. all
complete in all
respects as per
directions of the E-I-C.

Earthing the electrical


installation with 40
mm. (1.5'') dia G.I.
pipe (Earth electrode)
having 6.35 mm. dia
hole across the pipe at
305 mm. interval
securedly bonded by
soldering with 2 nos.of Fifty-Two Fifty-Two
No2 SWG HDBC Thousand Thousand
earth leads with its Three Three
Additional protection by 20 mm. Hundred Hundred
3 eathing.20ft each 1.000 52318.001 52318.001
Item (3/4'') dia G.I. pipe and and
up-to plinth level run at Eighteen Eighteen
a depth of 609.6 mm. point Zero point Zero
(2 ft.) below G.L.up-to Zero One Zero One
main board to be
earthed including
necessary connecting
copper sockets, bolts,
nuts, etc. complete for
maintaining earth
resistance within 1

1 of 2 7/12/20, 10:17 PM
View Form https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?fo...

ohm.Depth of bottom
of main electrode at
6858 mm. (22.5 ft)
from GL & length of
electrode 6096 mm.
(20 ft).

Construction of
Earthing inspection pit
inside measurement
600 mm x 600 mm
with 250 mm thick
brick in cement morter
(1:4) with 100mm thick
RCC top slab (1:2:4)
with 1%
Five Five
re-inforcement 450
Thousand Thousand
mm dia water sealed
Nine Nine
CI man-hole cover
Electrical Hundred Hundred
4 8.07.5 with locking each 1.000 5946.001 5946.001
Works and and
arrangement including
Forty-Six Forty-Six
necessary earth
point Zero point Zero
works, site filling and
Zero One Zero One
one brick flat soling 75
mm thick (1:3:6) base
concrete for making
inlet channel & 12mm
thick (1:2) cement
plaster with neat
finishing etc.all
complete up to a
depth of .75 meter.

One One
Hundred Hundred
Additional and and
5 N.S.I.04 Unforeseen Works LS 1.000 194.001 194.001
Item Ninety-Four Ninety-Four
point Zero point Zero
Zero One Zero One

Sixty-Eight
Thousand
Two
Grand Hundred
68226.024
Total: and
Twenty-Six
point Zero
Two Four

This Bill of Quantities is Electronically Signed by Ms. Abdul Hakim on behalf of M/s. Abdul Hakim

2 of 2 7/12/20, 10:17 PM

You might also like