Professional Documents
Culture Documents
Civil, Plumbing, Electrical, Fire Fighting, Auxiliary and Site Development, Infrastructure & Allied Works For Aga Khan Academy, Hyderabad
Civil, Plumbing, Electrical, Fire Fighting, Auxiliary and Site Development, Infrastructure & Allied Works For Aga Khan Academy, Hyderabad
Section A
10 Elevators 1 08 00 000
11 Signage 48 00 000
Amount in Words: Indian Rupees One Billion Six Hundred Fifty Million Fifty Seven
Thousand One Hundred and Sixty Five Only
Please read this Abstract in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 1 of 55
Tender Documents
Aga Khan Academy, Hyderabad
Please read this Abstract in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.
Page 2 of 55
02.12.09
Sr. N0. Item description Unit Quantity Rate Amount
SECTION 1 - EARTH WORK
Earth work in excavation by mechanical means / manual means in foundation trenches, drains, manholes and soak wells etc. including necessary shoring &
strutting, dewatering, getting out the excavated soil, sorting and stacking of useful material, dressing of the sides, ramming of bottom , backfilling into trenches and
1.01 disposal of surplus excavated earth at non objectionable place within the site as directed by engineer-in-charge All kinds of soil.
Rates in Words:
1.15 Supplying and Filling in foundation and plinth with murrum or selected soil brought from outside in trenches, plinth, sides of foundation etc. in layers not Cum 55,837 307 17,141,959
exceeding 15 cm in depth, including watering, ramming, consolidating each deposited layer for all leads and lifts.
Rates in Words:
Filling in plinth with good quality river sand under floors including watering, ramming, consolidating and dressing complete.
1.16 Cum 3,987 1,180 4,704,660
Rates in Words:
Providing and laying rubble soling in plinth and for plinth protection, compacted thickness specified as following, using specified size of hard stones including
filling, covering and leveling the surface with a layer of murrum after filling the voids with smaller size black trap stones 20-40mm, 40-63mm, 63-90, 90-150mm size of
1.18.a stone/metals or stone chips, including watering, ramming well and consolidating each layer by static roller/ vibratory roller or as directed by Engineer-in charge
1.18.a.1 150mm compacted thickness using 100 to 150mm cut size stones Cum 2,432 1,110 2,699,520
Rates in Words:
1.18.a.2 230mm compacted thickness using 150 to 230mm cut size stones Cum 12,205 1,066 13,010,530
Rates in Words:
Disposing of the surplus excavated earth and/or debris etc. including loading at site, transporting by mechanical or manual means & disposal, unloading, spreading
1.19
and dressing and compacting etc. complete as directed.
1.19.1 Within the plot area as directed by Engineer in-charge. Cum 3,071 64 196,544
Rates in Words:
1.19.2 Outside the plot area at no-objection place Cum 500 195 97,500
Rates in Words:
Carrying out pre construction anti-termite treatment for all types of structure with / without basement with RCC foundation/RCC wall or with load bearing walled
foundation. The chemical used shall be like chloropyriphos , Biflex TC, lindane etc. as per latest IS code no 6313 (Part II) . Plinth area in plan at GF shall only be
1.20 measured and paid. A guarantee bond of 10 years shall be furnished. Rate shall be inclusive of material required for Anti Termite Treatment and labour for applying.. Sqm 30,347 39 1,183,533
Rates in Words:
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and diposal of rubbish (unwanted material) anywhere
1.22 outside the site at non objectionable place. (Item shall be operated after prior approval from the client.) Site shall be selected by contractor.All kinds of Soil. Sqm 100,000 14 1,400,000
Rates in Words:
1.25 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of the trunks and branches removing the roots and stacking of serviceable
material shall be at non objectionable place within the site and disposal of unserviceable material anywhere outside the plot area at non objectionable place for all
leads and lifts.Site shall be selected by contracor.
1.25.1 Beyond 30 cm girth upto and including 60 cm girth. No 175 517 90,475
Rates in Words:
1.25.2 Beyond 60 cm girth upto and including 120 cm girth. No 125 1,035 129,375
Rates in Words:
1.25.3 Beyond 120 cm girth upto and including 240 cm girth. No 5 7,781 38,905
Rates in Words:
1.25.4 Above 240 cm girth No 5 7,781 38,905
Rates in Words:
Sum Carried over to Summary page 83,323,264
SECTION 2 - CONCRETE WORK
Providing and laying in position Plain cement concrete (PCC) of specified grade including finishing, curing, formwork (if required) etc. complete as directed by the
2.01 engineer-in-charge - For All work upto Plinth level, Roads, Pavements, Plinth Protection, Kerbing etc.
2.01.3 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) Cum 100 3,364 336,400
Rates in Words:
2.01.4 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cum 16,234 3,096 50,260,464
Rates in Words:
2.01.5 1:5:10 (1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Cum 50 2,858 142,900
Rates in Words:
Providing and laying BBCC (Brick Bat cement concrete) of specified grade including finishing, curing, form work (if required) etc. complete as directed by enginner in
2.06
charge. In foundations and Plinth.
2.06.1 1:3:6 (1 Cement : 3 Coarse Sand : 6 graded brickbats 40 mm maximum nominal size) Cum 1,509 3,100 4,677,900
Rates in Words:
REINFORCED CEMENT CONCRETE
Providing, hoisting (By Mechnical means), fixing exposed finish precast cement concrete work in M25 grade with minimum cement content 360 Kg per cum for
elements like lintels, beams, columns, slabs, window sills, shelves, moulding, cornices, trench covers etc including the cost of exposed centering, shuttering,
2.09.b rendering, erecting and keeping in position with cement mortar 1:3 (1 cement : 3 coarse sand)and necessary scaffolding at all floors, at any height and any level in any Cum 612 6,975 4,268,700
position etc. complete as directed by engineer-in-charge..
Rates in Words:
Sr. N0. Item description Unit Quantity Rate Amount
Providing and fixing precast fair finished exposed cement concrete Jali as per architectural design of M20 grade including centering and shuttering, cleaning, finishing
2.11.a and fixing in cement mortar 1:3 (1 cement: 3 fine sand) excluding plastering of the jambs, sills and soffits and cost of reinforcement as directed by engineer-in-charge
Rates in Words:
2.12.1 Excluding the cost of centering, shuttering and reinforcement
Rates in Words:
Providing and laying in position machine batched, machine mixed and machine vibrated design mix fair finish / smooth finish cement concrete of M25 grade with
minimum cement content 360 Kg per cum of concrete for reinforced cement concrete work for foundations, footings, columns, slabs, beams, pillars, staircase, vertical
and horizontal fins, doms, shells and vaults of any shape including pumping laying of concrete to site, finishing and curing etc.and including Admixtures in
recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of
2.13 Engineer-in-charge. Rate shall be inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and labour for insert sleeves if any wherever required while Cum 8,512 4,430 37,708,160
casting. Rate also to include lift charges and scaffolding for all heights / depths from FFL / GL
Rates in Words:
2.13.1 Excluding the cost of centering, shuttering and reinforcement
Rates in Words:
Providing and laying in position machine batched, machine mixed and machine vibrated design mix fair finish / smooth finish cement concrete of M30 grade with
minimum cement content 400 Kg per cum of concrete for reinforced cement concrete work for foundations, footings, columns, slabs, beams, pillars, staircase, vertical
and horizontal fins, doms, shells and vaults of any shape including pumping laying of concrete to site, finishing and curing etc.and including Admixtures in
recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of
2.14 Engineer-in-charge. Rate shall be inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and labour for insert sleeves if any wherever required while Cum 100 4,679 467,900
casting. Rate also to include lift charges and scaffolding for all heights / depths from FFL / GL.
Rates in Words:
2.14.a1 Excluding the cost of centering, shuttering and reinforcement
Rates in Words:
Providing and laying in position machine batched, machine mixed and machine vibrated design mix fair finish / smooth finish cement concrete of M40 grade with
minimum cement content 450 Kg per cum of concrete for reinforced cement concrete work for foundations, footings, columns, slabs, beams, pillars, staircase, vertical
and horizontal fins, doms, shells and vaults of any shape including pumping laying of concrete to site, finishing and curing etc.and including Admixtures in
recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of
2.15b Engineer-in-charge. Rate shall be inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and labour for insert sleeves if any wherever required while
casting. Rate also to include lift charges and scaffolding for all heights / depths from FFL / GL.
Rates in Words:
2.15b1 Excluding the cost of centering, shuttering and reinforcement Cum 0 4,990
Rates in Words:
Providing and laying Ready Mixed Concrete as per mix design of specified grade in fully automatic batching plant as per the design mix standards at RMC
2.16 manufacture’s site and transported to the place of work in transit mixer for any lead having continuous agitated mixture for reinforced cement concrete work.
The concrete is made using graded black trap stone aggregates of maximum 20mm nominal (down graded) size obtained from approved quarry including fine
aggregates conforming to latest IS 383 and cement all as per the design mix proportions conforming to IS 10262 with minimum cement content for durability including
supplying and providing concrete cover etc., which shall be followed as per latest IS 456 including pumping from transit mixer to all heights, placing, spreading,
vibrating, compaction, finishing to required levels, curing etc., complete all as per specifications but excluding cost of formwork and steel reinforcement. Rate to
include charges for providing and mixing additives or admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve
workability without impairing strength and durability, and labour for keeping embedment, insert sleeves) if any wherever required while casting. Rate also to include
lift charges and scaffolding for all heights / depths from FFL / GL.Contractor shall get prior approval of the mix design before placing the order.
Note:
Ready Mixed Concrete should be from reputed manufacturers like ACC, L&T, Ready Mix, Birla RMC etc., and contractors have to obtain prior approval of EIC with
(i)
respect to supplier of RMC.
(ii)
Rate to include the transportation with all leads from RMC plant to the place of work and pumping of concrete to any height and the rate shall be for all leads
(iii) Cement concrete delivered at site should be workable and should satisfy all the required standard tests like cube test and slump test etc or item description as
specified in code of practice. Samples taken at site only will be deciding factor.
It is the responsibility of contractor ensures proper co-ordination for the timely supply of concrete and approved quality product
(iv)
(v) Contractor has to make arrangement for proper approach road (for which nothing extra shall be paid for) to enable the vehicle carrying concrete to move freely
without any extra cost to the department before ordering the concrete. However existing approach road may be made use of for this purpose
(vi) Contractor has to ensure proper strong shuttering / centering to receive the concrete at all heights.
The design mix of RMC for the manufacturer / supplier of RMC has to be obtained well in time and approval of Engineer in Charge to be obtained prior to use. The
design mix should be based on latest IS 456. This approval has to be obtained whenever the design mix is changed. The RMC should be supplied confirming to the
(vii) approved design mix which shall be continously checked during the progress of work. All the quality checks as per IS stipulations should be scruplously followed
during the concreting. The work shall be carried out at all heights.
2.16.2 M20 Grade with (minimum cement 260 Kg + Flyash in reuiqred proportion) per cum Cum 9,793 3,977 38,946,761
Rates in Words:
2.16.3 M25 Grade with (minimum cement 288 Kg + Flyash in required proportion) per cum Cum 7,780 4,175 32,481,500
Rates in Words:
2.16.4 M30 Grade with (minimum cement 320 Kg + Flyash in required proportion) per cum Cum 100 4,372 437,200
Rates in Words:
2.17.a Supplying, fabricating and placing in position TMT reinforcement bars FE 415 confirming to IS-1786 reinforcement for RCC structure / items as per design
including transporting steel to the work site, handling wastage, decoiling, cutting, bending, cranking, fabricating to required shape, placing in position, binding with 18
guage (1.22 mm) MS wires, welding if necessary by using approved welding rods etc. for all levels etc. complete as directed by the engineer-in-charge. The quoted
rate should be inclusive the cost of binding wire and the same will not be measured and paid seprately. (rolling margin's and wastage shall not be paid.) Measurement
will be made on the length basis and converted into weight by using standard co-efficient) . The reinforcement shall be
2.17.a3 TMT bars- Fe-415, yield stress not less than 415 N/mm2 MT 4,305 48,069 206,937,045
Rates in Words:
Charges for making holes in walls, slabs, beams upto 350 mm depth or any other RCC member by core cutting machine of HILTI or equivalent including disposing
the debris. Measurement will be taken for the depth of holes in running meter for specified diameter. For disposal of the debris specification of relevant items shall be
2.19 followed. For executing the item prior approval of the structural consultant is required.
Rates in Words:
Sum Carried over to Summary page 431,299,519
SECTION 3 - FORM WORK
Form Work (Centering and shuttering) including strutting, propping, bracing etc. complete to give fair / smooth finish using best quality ordinary timber planking,
shuttering plywood (plain or laminated) or steel plates with MS adjustable steel props, H frames with bracing, adjustable spans, etc. including removal of forms for
foundations, footings, bases of columns, walls, slabs beams, sills, lintels, coping, staircases, arches, chajjas etc. in all shapes at all levels etc. complete as directed by
3.01 engineer-in-charge. The Height of propping and centering from supporting floor to ceiling should not exceed 4.5 meter. Sqm 188,891 354 66,867,414
Rates in Words:
Extra over item no. 3.01 (Form Work) for providing and erecting false staging with MS props or MS H frames for each additional height of propping and centering
where the height of propping and centering exceeds 4.5 m between supporting floor to ceiling, including temporary masonry work, stone pillars for supporting as
3.02.a required for steel props, H Frames etc. including cost of deshuttering and centering at all levels. (height more than 4.5 m. and upto 9.0 m) No staging shall be Sqm 3,957 77 304,689
measured for vertical walls & beam sides and only plan area is to be measured.
Rates in Words:
Extra over item no. 3.01 (Form Work) for providing and erecting false staging with MS props or MS H frames for each additional height of propping and centering
where the height of propping and centering exceeds 9.0 m. between supporting floor to ceiling, including temporary masonry work, stone pillars for supporting as
required for steel props, H Frames etc. including cost of deshuttering and centering at all levels.(height more than 9.0 m. and upto 18.0 m between supporting
3.02.b floor to ceiling). No staging shall be measured for vertical walls, columns & beam sides and only plan area is to be measured. Sqm 364 195 70,980
Rates in Words:
Extra over item no. 3.01 (formwork) for providing formwork for exposed concrete surfaces (vertical or horizontal surface) in desired pattern and size, using
laminated shuttering plywood, for slabs, soffits, walls, columns, pillars, beams, lintels, beam hunching, vertical fins etc. including neat cleaning the exposed
3.03.a concrete surface, as directed by the engineer-in-charge. (Same kind of shuttering material should be only used for standard and residual sizes.) Sqm 23,945 119 2,849,455
Rates in Words:
Extra over item no. 3.01 (formwork) for providing formwork for exposed concrete surfaces ( vertical or horizontal surface) in desired pattern and size, using best
quality steel shuttering plates, steel sheeting, for slabs, soffits, walls, columns, pillars, beams, lintels, beam hunching, vertical fins etc. including neat cleaning the
3.03.b exposed concrete surface, as directed by the engineer-in-charge. (Same kind of shuttering material should be only used for standard and residual sizes.) Sqm 7,925 119 943,075
Rates in Words:
Sum Carried over to Summary page 71,035,613
SECTION 4 - MASONRY WORK
Providing and laying brick work using common burnt clay conventional building bricks conforming to IS 1077-1992 having compressive strength not less than 50
4.01 Kg/cm2 in any shape and all depth including curing, scaffolding etc. complete as directed by engineer-in-charge.
Rates in Words:
4.10 Extra for providing exposed finish to brickwork at all heights, shapes in any position. The bricks used shall be
4.10.1 Wire Cut bricks Cum 25 2,260 56,500
Rates in Words:
4.10.2 Best quality hand moulded bricks Cum 25 1,624 40,600
Rates in Words:
Providing and laying uncoursed rubble masonry, with hard stone, locally available granite stone approved by architect, in foundations and plinth, in CM 1:4 (1
4.11 cement : 4 coarse sand) including leveling, etc. complete, as directed by engineer in charge. Cum 806 2,372 1,911,832
Rates in Words:
Sr. N0. Item description Unit Quantity Rate Amount
Providing and laying uncoursed rubble masonry with hard stone, locally available granite stone approved by architect in superstructure above plinth and for all
4.13 floors in CM 1:6 including curing, leveling etc. complete as directed by engineer in charge. Cum 2,837 2,406 6,825,822
Rates in Words:
Providing and laying coursed rubble masonry with hard stone, locally available granite stone approved by architect in superstructure above plinth and for all floors
4.14 in CM 1:6 including curing, leveling etc. complete as directed by engineer in charge. Cum 277 2,663 737,651
Rates in Words:
Sum Carried over to Summary page 50,690,214
SECTION 7 - PLASTERING WORK
Providing and laying average 10 mm thick single coat mala finish (finished smooth with steel trowel) plaster in CM 1:3 , on ceilings and stair soffits at all floors,
all shapes and all heights with necessary scaffolding, curing, making grooves, forming pattas, hacking properly to RCC surface (144 nos. of hacks per sqft) etc.
7.01.b complete as directed by Engineer-in-charge. The plaster mortar shall be machine mixed. Sqm 44,424 160 7,107,840
Rates in Words:
Providing and laying average 15 mm thick single coat mala finish plaster in CM 1:4 (1 cement : 4 Coarse sand) with polypropylene fibers in recommended
proportions on sides of brickwork/ blocks at all floors, all shapes and all heights with necessary scaffolding, curing, making grooves, forming pattas, hacking properly
7.02.b RCC surface etc. complete as directed by the Architect and Engineer-in-charge. The plaster mortar shall be machine mixed. Sqm 73,779 160 11,804,640
Rates in Words:
Providing & laying average 18 mm thick mala finish cement plaster in two coats at all heights, all shapes and all levels with 12 mm thick under coat in CM 1:4 (1
cement : 4 coarse sand) rough wired finish and 6 mm thick finishing coat in CM 1:3 (1 cement : 3 fine sand) mala finish (finished with steel trowel) including
7.03.a scaffolding, curing, making grooves, forming pattas and drip mould, hacking RCC surface etc. complete, as directed by Engineer-In-charge. The plaster mortar shall Sqm 20,941 211 4,418,551
be machine mixed.
Rates in Words:
Providing and laying average 18-20 mm. thick Sand face cement plaster on walls upto any height above ground level and for all shapes consisting of average 12-
15 mm. thick backing coat of CM 1:4 (1 cement: 4 coarse sand) with polypropelene fibersand average 6 mm. thick uniform grained textured finish coat using wooden
7.04.a Gutka, in CM 1:3 (1 cement: 3 sand), including scaffolding, forming grooves, drip moulds, pattas, hacking RCC surface, curing etc. complete as directed by engineer- Sqm 1,226 234 286,884
in-charge. The plaster mortar shall be machine mixed.
Rates in Words:
Providing and fixing hexagonal chicken mesh of size 20 mm. x 20 mm. of 22 gauge at junction of concrete and brick work or between different materials, etc. as
7.10 Sqm 12,947 76 983,972
directed by engineer in charge.
Rates in Words:
7.11.a Flush pointing on the following work with Cement Mortar 1:2 (1 Cement : 2 Fine Sand)
7.11.a.1 Brick work Sqm 100 70 7,000
Rates in Words:
7.11.a.3 Coursed Rubble masonry Work Sqm 100 70 7,000
Rates in Words:
7.11.a.4 Uncoursed Rubble masonry Work Sqm 100 70 7,000
Rates in Words:
7.11.c Recessed pointing on the following work with Cement Mortar 1:2 (1 Cement : 2 Fine Sand)
7.11.c.1 Brick work Sqm 100 83 8,300
Rates in Words:
7.11.c.3 Coursed Rubble masonry Work Sqm 990 83 82,170
Rates in Words:
Sum Carried over to Summary page 24,713,357
SECTION 8 - WATERPROOFING WORK
Providing and laying integral cement based brickbat coba water proofing treatment average 115mm thick and minimum thickness at khurra as 65 mm including
8.01.a preparation of surface as required for treatment on roofs, balconies, terraces etc. at all floors consisting of following operations and furnishing a guarantee bond of 10 Sqm 24,524 545 13,365,580
years.
Rates in Words:
Cleaning and applying a cement slurry with mixed with water proofing compound as manufacture's specification as directed by engineer-in-charge over the slab
i) including adjoining walls upto 300 mmheight including cleaning the surface before the treatment
Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand )
ii) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto
300 mm height including rounding of junctions of walls and slabs.
After three days of proper curing applying a second coat of cement slurry admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-
iii)
in-charge
Finishing the surface to make wired finish with average 12 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
iv)
compound conforming to IS : 2645 and approved by Engineer-in-charge
The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and
v) as directed and specified by the Engineer-in-Charge. (Only plan area shall be measured, vata shall not be measured separately and paid for.)
Providing and laying integral cement based brickbat coba water proofing treatment average 75mm thick including preparation of surface as required for
8.02.a treatment on sunk slabs of toilets, depressed portions etc. at all floors consisting of following operations and furnishing a guarantee bond of 10 years. Sqm 4,518 545 2,462,310
Rates in Words:
Providing and laying crystalline water proofing treatment of ZYPEX or equivalent to vertical and horizontal surfaces of depressed portions of toilets, pantry and the
like as per manufacture’s specification or as directed by the engineer-in-charge and furnishing a guarantee bond of 10 years. Only plan area shall be measured, vata
8.02.c shall not be measured separately and paid for.) Sqm 497 426 211,722
Rates in Words:
Providing 18 to 20 mm. thick Water proof cement plaster in double coat on sides of masonry / RCC wall at all heights, first coat of 12 to 15 mm thk under coat in
cement mortar 1:3 (1 cement : 3 sand) and second coat of 5 to 6 mm thk with cement mortar 1:3 (1 cement : 3 sand) including providing and mixing water proofing
compound such as Hydroshield powder & liquid of ConTech Chemicals, Fosroc, CICO or equivalent in recommended proportions in both coats as approved by the
Architect and Engineer-in-charge and finishing the surface smooth finish with neat cement slurry at 2.75 Kg per sqm etc complete including furnishing a guarantee
8.05.b bond for 10 years, hacking to RCC surface. Cement slurry admixed with Hydroshield powder & liquid of ConTech Chemicals, Fosroc, CICO or equivalent in Sqm 5,095 292 1,487,740
recommended proportions is to be applied before each coat and final finishing coat
Rates in Words:
Providing and laying average 60 mm thick water proof cement concrete flooring in 1:2:2 (1 Cement : 2 Sand : 2 Graded Aggregate 10mm nominal size) to RCC
swimming pool floor, water tanks at all heights in line, level and gradient including mixing water proofing compound such as Hydroshield powder & liquid of ConTech
Chemicals, Fosroc, CICO or equivalent in recommended proportions as approved by the Architect and Engineer-in-charge and leaving the surface rough wired finish
8.06 to receive any type of flooring / smooth finish etc complete including furnishing a guarantee bond for 10 years. Rate shall be inclusive of curing, scaffolding etc. as Sqm 4,651 284 1,320,884
directed
Rates in Words:
Providing and placing in position suitable size (width, thickness based on water head and pressure) PVC water stops conforming to IS : 12200 as approved by
consultant for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete as
8.12 directed by engineer in charge. Rmt 118 486 57,348
Rates in Words:
Providing and laying over deck insulation over terrace water proofing of 115 mm thick ex-foliated vermiculite of Porosil or equivalent for roof insulation in the
ratio of 1 :6 (1 cement : 6 Ex foliated vermiculite (by volume)). Density of Ex foliated vermiculite shall be 212 kg/cum. The cement shall be mixed with the ex foliated
vermiculate in dry stage & then minimum qty of water shall be added. After screeding the ready mixed material in specified thickness, curing shall be carried out at
least for for 7 days by sprinkling of required quantity of water so that surface remains damp and not to be done by ponding or flooding. The work includes cleaning of
8.13 the surface with wire brush thoroughly necessary scaffolding finishing the top surface as best workmanship like manner as per the manufacturers specifications and Sqm 24,524 1,268 31,096,432
as directed by Engineer In charge.
Rates in Words:
Sum Carried over to Summary page 50,002,016
SECTION 9 - FLOORING WORK
Providing and laying ceramic tiles of required surface finish (Matt, Satin, Glossy, Non skid, Rustic) in floor with residue and skirting of approved make and shade as
per design laid over 20 mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) bedding on 40 mm wired finish screed 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 12.5 mm nominal size ), laid to proper slope and level. Finishing should be done with pointing the joints with white cement and matching pigment,
including curing, cleaning with mild oxalic acid, protecting the flooring until handing over to the client etc. complete as directed by Engineer-in-charge. The rate should
9.02.a include the covering & protecting of flooring with plastic + POP, or as required, removing the same at the time of handing over after completion of the item until Sqm 1,050 844 886,200
handing over to client.
Rates in Words:
Sr. N0. Item description Unit Quantity Rate Amount
Providing and laying in position ceramic wall tiles of required surface finish (Matt, Satin, Glossy, Non skid, Rustic) for dado, risers of steps etc. of approved make
and shade as per design and drawing. Tile is to be fixed over 12 to 15 mm thick wired finish plaster in cement mortar 1:4 ( 1 cement : 4 coarse sand) with
polypropylene fibers. Tile shall be fixed with 1:1 cement sand mortar of average 6 mm thickness behind the tiles including pointing in white cement mixed with pigment
of matching shade etc. complete as approved by architect and directed by engineer-in-charge. Rate is inclusive of back coat of 12 to 15 mm thick plaster. The rate
should include the covering & protecting of flooring with plastic + POP, or as required, removing the same at the time of handing over after completion of the item until
9.02.c handing over to client. In case of hollow sound upon tapping the tile after laying / fixing, the tile would have to be removed and replaced at contractors cost. Sqm 50 755 37,750
Rates in Words:
Providing and fixing ceramic tiles in dado of required surface finish (Matt, Satin, Glossy, Non skid, Rustic) with cement based polymer adhesive like BAL or
equivalent with minimum 3 mm thickness or as manufacture’s specification. The material, workmanship, coverage area shall be carried out as per the supplier’s
specifications and approved by architect and engineer-in-charge. In dado adhesive is to be applied over smooth finish mala plaster (1:4) instead of wired plaster. Rate
is inclusive of mala finish plaster on the masonry wall. The rate should include the covering & protecting of flooring with plastic + POP, or as required, removing the
9.02.d same at the time of handing over after completion of the item until handing over to client. Sqm 50 984 49,200
Rates in Words:
Providing and laying vitrified tiles of approved make and shade as per design in floor with residue and skirting of desired colors and size of first quality over a
minimum 20 mm. thick cement mortar 1:3 bedding on 40 mm wired finish screed and laid to proper slope and level. Finishing to be done with flush pointing in white
cement and matching pigment including curing and cleaning with mild oxalic acid etc. complete as directed by Architects and Engineer-in-charge. Rate shall be
inclusive of protection of flooring until the handling of the project by covering the joints with abrotaps, platic sheet and plaster of paris & removing the same at the time
9.03.a of handing over as directed by engineer in charge. Sqm 50 1,644 82,200
Rates in Words:
Providing and laying vitrified tiles of approved make and color as per design in floor with residue and skirting of desired colors and size of first quality, over a
minimum 20 mm. thick cement mortar 1:3 bedding on 40 mm wired finish screed and laid to proper slope and level. Groove of (3mm x 5mm) is prepared with PVC
spacer of approved make and filling in groove is to be done with cementitious grout of matching shade including curing and cleaning with mild oxalic acid etc.
complete as directed by Architects and Engineer-in-charge. Rate shall be inclusive of filling in grooves with cementitious grout and protection of flooring until the
9.03.b handling of the project by covering the joints with abrotaps, plastic sheet and plaster of paris & removing the same at the time of handing over as directed by engineer Sqm 3,233 1,660 5,366,780
in charge.
Rates in Words:
Providing and laying in position vitrified wall tiles of required surface finish (Matt, Satin, Glossy, Non skid, Rustic) for dado, risers of steps etc. of approved make
and shade as per design and drawing. Tile is to be fixed over 12 to 15 mm thick wired finish plaster in cement mortar 1:4 (1 cement : 4 coarse sand) with
polypropylene fibers in recommended proportions with keeping a groove of (3mm width X 5 mm depth). Tile shall be fixed with 1:1 cement sand mortar of average 6
mm thickness behind the tiles including filling the grooves with cementitious grout of matching shade etc. complete as approved by architect and directed by
engineer-in-charge. Rate shall be inclusive of 12 to 15 mm thick wired finish plaster with polypropylene fibers in cement mortar 1:4 and filling in grooves with
cementitious grout. The rate should include the covering & protecting of flooring with plastic + POP, or as required, after completion of the item until handing over to
9.03.d client & removing the same at the time of handing over to client. In case of hollow sound upon tapping the tile after laying / fixing, the tile would have to be removed Sqm 9,356 1,571 14,698,276
and replaced at contractors cost.
Rates in Words:
Providing and fixing vitrified tiles in dado with cement based polymer adhesive like BAL or equivalent in with minimum 3 mm thickness or as manufacture’s
specification. The material, workmanship, coverage area shall be carried out as per the supplier’s specifications and approved by architect and engineer-in-charge. In
dado adhesive is to be applied over smooth finish mala plaster instead of wired plaster. Rate is inclusive of smooth finish mala plaster. The rate should include the
9.03.e covering & protecting of flooring with plastic + POP, or as required, after completion of the item until handing over to client and removing the same at the time of Sqm 25 1,784 44,600
handing over to client.
Rates in Words:
Cement concrete flooring (IPS) 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) laid in one layer finished with trowel finish using 1:1 cement sand mortar for
filling the minor holes etc. or alternate panels using 5 mm thk glass strips finished with a trowel including curing etc. complete as per design or as directed by
9.04.a engineer-in-charge.
9.04.a.2 50 mm thick with 6 to 10 mm nominal size stone aggregate Sqm 200 247 49,400
Rates in Words:
Supplying and sprinkling nonmetallic floor hardener of Ironite or equivalent @ 4 Kg per sqm or as per supplier's specification over green concrete surface / IPS.
9.04.b Rate includes finishing surface with power floater as per design or as directed by engineer-in-charge. Kg 3,120 36 112,320
Rates in Words:
Extra for providing and mixing Fibermesh 150 e3 ( Formerly Stealth e3 ) multi dimensional graded multifilament 100% virgin polypropylene fibers
manufactured by M/s. PROPEX CONCRETE SYSTEMS, U.S.A. and represented by “M/s. NINA CONCRETE SYSTEMS PVT. LTD.@ 0.9 Kg per cum or as per
9.04.c manufacture’s specification of approved make while doing the cement concrete in cement concrete pavement / IPS as per supplier's specification and approved by Kg 1,000 492 492,000
architect and engineer-in-charge.
Rates in Words:
Providing & laying broken white china mosaic flooring for plain and curved surfaces, comprising of 20 to 25 mm. size broken pieces of ceramic/glazed tiles laid
over cement mortar 1:6 bedding including applying cement slurry at the rate of 2.75 kg per sq.m. on plain or sloped surfaces. and filling joints with white cement. The
flooring shall be tampered to bring the mortar up to the surface, including rounding of the junctions and extending them upto 15 cm. along the parapet wall. The rate
shall include bands, if different colour is used, any pattern or design as per drawing and direction, curing, cleaning with water and oxalic acid, etc. complete. (Wall to
wall measurement will be considered only including vata upto 150mm height). The rate should include the covering & protecting of flooring with plastic + POP or as
9.09.a required after completion of the item until handing over to client and removing the same at the time of handing over. Sqm 27,746 455 12,624,430
Rates in Words:
Providing and laying in position white china mosaic on dado comprising of 20 to 25 mm size broken pieces of ceramic / glazed tiles laid over 12 to 15 mm thick
wired finish plaster in cement mortar 1:4 ( 1 cement : 4 coarse sand) with polypropelene fibers including applying a cement slurry at 2.75 Kg per sqm on plastered
surface. China mosaic shall be fixed with 1:2 cement sand mortar of average 6 mm thickness including filling the joints with white cement. The dado shall be tampered
to bring the mortar up to the surface. The rate shall be inclusive of bands, if different color is used, any pattern or design as per drawing and direction, curing,
scaffolding, cleaning with water etc. complete as directed by the engineer in charge. Rate is inclusive of 12 to 15 mm thk wired finish plaster in cement mortar 1:4.
9.09.b The rate should include the covering & protecting of flooring with plastic + POP or as required after completion of the item until handing over to client and removing Sqm 4,410 555 2,447,550
the same at the time of handing over.
Rates in Words:
Providing and laying average 25mm (20 to 30 mm) thick hand dressed / machine cut green polished kotah stone of approved quality, selected and sorted for
uniform colour, in floor, otta and skirting etc. of required sizes upto 600 mm as per design in normal pattern (square or rectangular) and residue as per drawing,
including 1:6 (1 cement : 6 sand) cement mortar bedding of average 35 to 50mm thickness, jointed with grey cement and colour pigment as specified. Polishing to be
done with 2 coats of 60, 120 grades of emery, balckchapadi and gutka for special polish, after it polishing to be done with 220, 320, 400, 600 grades of emery till
semimirror finish is achieved. Curing, daily moping with water & kerosene as directed for at least 15 days after final polishing etc. complete with marble stone to form
bands (marble flooring and bands shall be paid under relevant item) upto the satisfaction of the Architect or Engineer-in-charge.(NO WAXING WILL BE
9.10.a PERMITTED.)The rate should include the covering & protecting of flooring with plastic + POP or as required after completion of the item until handing over to client Sqm 37,715 1,152 43,447,680
and removing the same at the time of handing over.
Providing and laying average 25mm (20 to 30 mm) thick hand dressed / machine cut green polished kotah stone of approved quality, selected and sorted for uniform
color, in floor, otta and skirting etc. of required sizes upto 600 mm as per design in diagonal pattern and residue as per drawing, including 1:6 (1 cement : 6 sand)
cement mortar bedding of average 35 to 50mm thickness, jointed with grey cement and colour pigment as specified. Polishing to be done with 2 coats of 60, 120
grades of emery, balckchapadi and gutka for special polish, after it polishing to be done with 220, 320, 400, 600 grades of emery till semimirror finish is achieved.
Curing, daily moping with water & kerosene as directed for at least 15 days after final polishing or upto the satisfaction of the Architect or Engineer-in-charge etc.
complete. (NO WAXING WILL BE PERMITTED). The rate should include the covering & protecting of flooring with plastic + POP or as required after completion of
9.10.b the item until handing over to client and removing the same at the time of handing over. Sqm 100 1,287 128,700
Rates in Words:
Sr. N0. Item description Unit Quantity Rate Amount
Providing and laying average 25mm (20 to 30 mm) thick hand dressed / machine cut green polished kotah stone of approved quality selected and sorted for uniform
colour, in floor, otta and skirting etc. of required sizes above 600 mm and upto 1000 mm as per design in normal pattern (square or rectangular) and residue as per
drawing, including 1:6 (1 cement : 6 sand) cement mortar bedding of average 35 to 50mm thickness, jointed with grey cement and color pigment as specified.
Polishing to be done with 2 coats of 60, 120 grades of emery, balckchapadi and gutka for special polish, after it polishing to be done with 220, 320, 400, 600 grades of
emery till semimirror finish is achieved. Curing, daily moping with water & kerosene as directed for at least 15 days after final polishing or upto the satisfaction of the
Architect or Engineer-in-charge etc. complete. (NO WAXING WILL BE PERMITTED). The rate should include the covering & protecting of flooring with plastic + POP
9.10.c or as required after completion of the item until handing over to client and removing the same at the time of handing over. Sqm 50 1,287 64,350
Providing and laying in position average 10 mm thick green kota stone of approved quality, selected and sorted for uniform color in skirting of required size as
per design and drawing. Kota stone is to be fixed over 8 mm thk cement mortar (1:1) jointed with grey cement and color pigment. Polishing to be done with 2 coats of
60, 120 grades of emery, balckchapadi and gutka for special polish, after it polishing to be done with 220, 320, 400, 600 grades of emery till semimirror finish is
achieved. Curing, daily moping with water & kerosene as directed for at least 15 days after final polishing or upto the satisfaction of the Architect or Engineer-in-charge
9.10.e etc. complete, (NO WAXING WILL BE PERMITTED). The rate should include the covering & protecting of flooring with plastic + POP or as required after completion Sqm 1,055 1,093 1,153,115
of the item until handing over to client and removing the same at the time of handing over.
Rates in Words:
Providing & laying average 25 mm thick stone of following type of approved quality, selected and sorted for uniform color, in floor, otta, sill, skirting, tread, riser etc., in
required sizes upto 60 cm. as per design and drawings (with grooves). Kota stone to be laid over cement mortar 1:6 bedding of average 35 to 40 mm thickness with
joints, pointing and making grooves as specified, including curing and cleaning upto the satisfaction of the Architect & Engineer-in-charges etc. complete. (NO
WAXING WILL BE PERMITTED) The rate should include the covering & protecting of flooring with plastic + POP or as required after completion of the item until
9.12.a handing over to client and removing the same at the time of handing over.
Rates in Words:
Providing & fixing average 25 mm thick both side prepolished (upto semimirror finish) green kota of uniform size and color for shelves and vertical partitions etc.
from 1.0 to 1.5m long, including necessary machine-cut edges (uniform thickness) rounded edges, necessary cement mortar bedding in CM 1:3 of average 20 mm
9.13.d thickness. Cement joints and pointing as specified with polishing, curing, daily mopping with water and kerosene as directed for atleast 15 days or upto the satisfaction Sqm 458 1,245 570,210
of the Architect & Engineer-in-charge.
Rates in Words:
Providing & fixing green pre polished kota (upto semimirror finish) of average 50 mm. thick of uniform size and colour for sills, floor etc. in required sizes from 1.0
m. to 1.5 m. long, including necessary machine-cut edges (uniform thickness), rounded edges, necessary cement mortar bedding in CM 1:3 of required thickness,
average 20 mm. Cement joints and pointing as specified with polishing , curing, daily mopping with water and kerosene as directed for atleast 15 days or upto the
satisfaction of the Architect & Engineer-in-charge. The rate should include the covering & protecting of flooring with plastic + POP or as required after completion of
9.14 the item until handing over to client and removing the same at the time of handing over. Sqm 50 1,261 63,050
Rates in Words:
Providing roughened strip 2.5 cm. wide to form antiskid surface on any flooring as per design, including forming straight deep curved gishi (groove), 6 mm. Wide
& 4 mm deep on two sides of the roughened area, chiseling, polishing the edges, sides and bottom of gishis etc. complete as per sample approved and as directed by
9.15 engineer in charge. Rmt 2,726 162 441,612
Rates in Words:
Extra for providing special mirror finish polish on kotah flooring over semi mirror polish with different grades of emery like 800, 1200, 5x and buffing with tin oxide.
9.16 Sqm 1,000 115 115,000
All work to be carried out with polishing machine.
Rates in Words:
Providing and laying average 18 mm thick marble stone flooring of approved quality (sample of marble stone shall be approved by architect) as per design in
required sizes and shapes including bands in polished kotah stone flooring over 35 to 40 mm (average) thick bedding of cement mortar 1:3 (1 cement: 3 coarse sand)
laid and jointed with white cement and matching pigment including rubbing, semi mirror polishing with different grades of Emery, curing etc. complete.Polishing to be
done with 2 coats of 60, 120 grades of emery, balckchapadi and gutka for special polish, after it polishing to be done with 220, 320, 400, 600 grades of emery till
9.17 semimirror finish is achieved. (Only finished marble work will be measured.) The rate should include the covering & protecting of flooring with plastic + POP or as Sqm 6,727 2,960 19,911,920
required after completion of the item until handing over to client and removing the same at the time of handing over.
Rates in Words:
Extra for providing special mirror finish polish on marble flooring over semi mirror polish with different grades of emery like 800, 1200, 5x. All work to be carried out
9.18 Sqm 100 115 11,500
with polishing machine.
Rates in Words:
Providing & laying machine cut single polished “Agra Red” minimum 25 mm. thick slab upto 600 mm in flooring or as per design and drawing in in normal
pattern straight or staggered joint with square or rectangular shaped stone (with grooves 10mm wide or without grooves) in cement mortar 1:6 bedding of average 35
to 50mm thickness, pointing with matching pigment and white cement in joints or filling the grooves with CM 1:2 and matching pigment, curing etc. complete. The rate
shall also include for rubbing and polishing (without scratches and marks of emeries) with different grade of emery etc. complete. The work shall be carried out as per
9.21 the approval of architect and engineer-in-charge.The rate should include the covering & protecting of flooring with plastic + POP or as required after completion of the Sqm 50 1,916 95,800
item until handing over to client and removing the same at the time of handing over.
Rates in Words:
Providing & laying 18 to 20 mm thick mirror finished granite of approved shade and quality, selected and sorted for uniform color in floor, skirting as per design
size upto 900 mm over average 40 mm thick cement mortar bedding in 1:3. (Only finished granite work shall be measured). The rate includes rounding, champhering
and mirror polishing of edges. The work shall be carried out as per the approval of architect and engineer-in-charge. The rate should include the covering & protecting
9.24.a of flooring with plastic + POP or as required after completion of the item until handing over to client and removing the same at the time of handing over. Sqm 147 3,203 470,841
Rates in Words:
Providing & laying 18 to 20 mm thick flame finished granite of approved shade and quality, seleted and sorted for uniform color in floor, skirting as per design and in
required sizes and shapes over 35 to 40 mm thick cement mortar bedding in 1:3. (Only finished granite work shall be measured). The rate includes rounding,
champhering and mirror polishing of edges. The work shall be carried out as per the approval of architect and engineer-in-charge. The rate should include the
9.24.b covering & protecting of flooring with plastic + POP or as required after completion of the item until handing over to client and removing the same at the time of Sqm 17 3,541 60,197
handing over.
Rates in Words:
Providing & laying 18 to 20 mm thick both side polished granite of approved shade and quality, seleted and sorted for uniform color for urinal, platform as per
design and in required sizes and shapes over required size of cement mortar bedding in 1:3. (Only finished granite work shall be measured). The rate includes
9.24.c rounding, champhering and mirror polishing of edges. The work shall be carried out as per the approval of architect and engineer-in-charge. Sqm 189 3,390 640,710
Rates in Words:
Cuting, Transporting and Fixing granite cobbles of size 150mm x 150mm of thickness 100mm from stones available at site as per design and drawing over 50
mm thick coarse sand bedding (cushioning layer), having compacted sub-base (in required slope and of specified thickness as per drawing - to be paid under
relevant item). Joints are to be filled with cement mortar (1:10). Sample to be approved by the Architect before executing the mass area. The work shall be carried out
as per the approval of architect and engineer-in-charge. The rate shall be inclusive of collecting the stones / boulders from anywhere within site, installing, operating
and maintaining stone cutting machine, cutting the stone as per required size and shape, transporting the finished stones to required location, providing coushion layer
9.25.b of coarse sand, fixing the granite cobbles and filling of the joints but exclusive of preparing layer of subbase. Sqm 500 480 240,000
Rates in Words:
Providing and fixing 60 mm thick abrasion resistant interlocking or Brick type paver blocks of M40 grade of approved make and colour as per design including
average 50 mm coarse sand bedding over compacted sub-base (in required slope and of specified thickness). Sample to be approved by the Architect & Engineer-in-
9.28 charge. Rate shall be exclusive of sub-base Sqm 12,376 622 7,697,872
Rates in Words:
Sr. N0. Item description Unit Quantity Rate Amount
Brick on edge flooring with bricks of class designation 75 including cement slurry, finishing the joints, flush pointing, curing etc. complete as per drawing in cement
9.29.a mortar with F.P.S. bricks. Sample shall be approved by architect and engineer-in-charge Sqm 200 456 91,200
Rates in Words:
Providing and fixing glass mosaic tiles of approved make and colour as per design in floor, dado in line, level and gradient at all levels and heights in any shape.
Chemicals or bonding material for fixing the tiles of size 25mm x 25mm shall be as per manufacturer’s specification. Grouting of the joints to be done with cement
grount of matching colour or as directed by manufacturers specification including necessary cleaning with oxalic acid. Sample of material and pattern is approved by
engineer-in-charge. The rate should include the covering & protecting of flooring with plastic + POP or as required after completion of the item until handing over to
9.33 client and removing the same at the time of handing over. Sqm 1,659 2,190 3,633,210
Rates in Words:
Providing and laying cement concrete for roads, pavements & floors 100 –150 mm. thick with machine mixed, machine vibrated M20 concrete with minimum
cement content 325 kg/cum etc. in required slope and camber as per drawing including giving a floating coat of 1:1 cement mortar, with nominal temperature steel /
weld mesh / fibers / dowel bars / tie bars at joints as specified by the Architect/Engineer-in-charge. The rate shall be exclusive of reinforcement steel, weld mesh,
fibers, dowel bars etc. and the same shall be paid in relevant tender items. Rate shall be inclusive of concrete (to be laid in alternate panels of 3.75 m X 5.5m) with
9.34.a steel channel formwork. Sieved sand shall be used Cum 3,548 4,345 15,416,060
Rates in Words:
Extra for carrying out vaccum dewatering & Power floater treatment in floors, well compacted, mechanically vibrated, finished to required levels, floated with neat
cement and power trowelled to get desired smooth finishing/broom finish, over a levelling course, including MS shuttering, curing for 10 days with gunny bags etc
complete. The suitable size of panel should be approximately 3.75 x 5.5 m or as directed by Engineer. The Construction joints to be formed at every 5m distance by
grooving with mechanical saw within 48 hrs. Groove/sawed joints shall be made of 6mm width and 25 mm depth min as shown in the drawing. The rate shall be
9.34.b inclusive of labour, grooves and machinery cost. Sqm 26,213 122 3,197,986
Rates in Words:
Providing and laying Non Cushion Synthetic Floor system of Sports Master or equivalent in 4 layers, consisting of two layer of leveling course of level master make or
equivalent and two layers of approved shade Acrylic paint and marking of lines with white paint of colour plus make or equivalent as per the manufacturer’s guideline
9.35.a in line, level and gradient to the satisfaction of Engineer-In-Charge including the cost of base course specified under section a to c below. Sqm 2,680 1,777 4,762,360
Rates in Words:
EXTRA for Synthetic floor with 6 layer cushion system, consisting of one layer of leveling course of level master make or equivalent, three cushion layer of cushion
master make or equivalent, two layers of approved shade Acrylic paint and marking of lines with white paint of colour plus make or equivalent as per the
9.35.b manufacturer’s guideline in line, level and gradient to the satisfaction of Engineer-In-Charge. Sqm 2,680 201 538,680
Rates in Words:
Providing and fixing outdoor wood floor IPE - Smooth version of size 300X300X30mm of approved make Takettt or equivalent as per manufacture’s specification.
9.38 Floor is to be laid over the polypropylene patenet grid as per manufacture’s specification and as directed by engineer in charg Sqm 1,050 5,729 6,015,450
Rates in Words:
Providing and laying in position clay tiles of size 200 mm X 80 mm as per approved sample, as per design and drawing on exterior wall as cladding. Tile is to be
fixed over 15 mm thick wired finish plaster in cement mortar 1:4 (1 cement : 4 coarse sand). Tile shall be fixed with 1:1 cement sand mortar of average 6 mm
thickness with bonding agent / integral tile adhesive of approved make of behind the tiles including keeping the groove of (5mm x 5mm) with PVC spacer of approved
make and grouting in grooves (5mm width x 5mm deep) with cementitious grout of matching shade etc. complete as directed by engineer-in-charge. Rate is inclusive
9.39 of back coat of 12 to 15 mm thick plaster with polypropelelne fibers, grouting with cementitious grout. Sqm 21,870 1,064 23,269,680
Rates in Words:
9.40 Providing & laying sandwich platform comprising of Rmt 460 5,602 2,576,920
Providing & fixing stone cladding on wall for all heights with natural finish “AGRA RED" stone, 30 mm thick having maximum size of 1200x600 mm with grooves
(10mm x 10mm) in both direction, filling the grooves with epoxy grout (10mm x 5mm) of matching shade as per detail design and drawing. The stone shall be fixed
with stainless steel clamps (304 grade) of approximate size 100x20x4mm (LxWxthick) inserted in the wall, curing etc. complete. The rate shall also include backing
coat wired finish plaster of average 15 mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) with polyproplene fibers (----gms per 1 cement bag) of approved
9.41 make, grouting the clamps in brick wall with non shrink cement mortar and anchor fasteners for RCC surfaces, etc. complete. The work shall be carried out as per the Sqm 12,728 2,614 33,270,992
cladding sample approved by Architect and engineer in charge.
Rates in Words:
Sum Carried over to Summary page 237,142,265
SECTION 10-STRUCUTRAL STEEL WORK
Structural steel work in riveted, bolted or welded in built up sections, trusses and framed work including supplying, fabricating, cutting, assembling, hoisting and fixing
in position at all heights of all shapes and size with all leads and lifts as per latest IS 4923, IS 1161, IS 806 for the work of sheds, canopy, trusses, space frame,
cladding, skylight, monkey ladder, staircase, railing, gate, insert plate, cattle trap etc. It should be including necessary rolled joists, channels, angles, tees, flats, angle
cleats, gusset plates, position hip and jack lifters, purlins, etc. including cutting and welding the members as per detailed drawing and design. The rate shall include 1
coat of Rustocap and 2 coat of Hi-Gloss Metal PU Paint of Asian paint over all the surfaces of the steel sections or as specified in the drawing. (Only standard
10.01.a measurements will be paid for as actual cut length used at site). Shop drawings for the connection details shall be prepared for the approval of the architect.
Rate shall be inclusive of cutting, wastage, welding, bending (shop at site), bolting wherever necessary, in position welding of required length, grinding, finishing
edges, filling the welded spots with metal putty. It should also include the cost of approved ISI make and size zinc coated nut-bolt and Anchor fasteners of Hilti or
Fisher as approved by engineer-in-charge
Contractor should submitted fabrications shop drawings for work involved based on construction drawings (that may be issued during construction period) for approval
by Engineer-in-charge. The fabrication work shall start after approval by Architect of the fabrication drawings. Any change required in fabrication drawings shall be
carried out at no extra cost over quoted rates. Fabrication works to be carried out as per relevant IS standards.
Rolled steel sections (equal and unequal angles, flats, angles, tees, channels, plates of different sizes etc.), Solid flats, bars chequered plate etc.
10.01.a.1 Kg 119,310 71 8,471,010
Rates in Words:
10.01.a.2 RHS, SHS, tubular hollow sections having Yst (yield strength) 310 Mpa and specified thickness as per drawing Kg 68,263 74 5,051,462
Rates in Words:
Providing, fabricating and fixing MS jali including cutting and welding the members as per detailed drawing and design and as directed by engineer-in-charge. The
rate shall include 1 coat of Rustocap and 2 coat of Hi-Gloss Metal PU Paint of Asian paint over all the surfaces or specified by engineer-in-charge of approved make
10.02 over a 2 coats of zinc chromate yellow oxide primer. (Actual measurement shall be paid for).
10.02.1 MS Weld mash jali (25mm x 25mm size of 12 guage) Sqm 100 222 22,200
Rates in Words:
10.02.2 GI Chain Link Jali (50mm x 50mm size of 10 guage) Sqm 1,080 281 303,480
Rates in Words:
Providing and fixing in position, interlocking rolling shutter of approved make, of 18 gauge, 75mm wide cold rolled MS lath interlocked, including top cover, spring,
axles, guide rails, tees, iron pulleys, bearings, handles, holding down bolts embedded in CC 1:2:4 including1 coat of Rustocap and 2 coat of Hi-Gloss Metal PU Paint
10.03 of Asian paint over all the surfaces etc. as directed. (Measurements considered for payments shall be clear size of opening plus guide channels on both the sides for
width and 450mm on top for drum height.)
10.04.1 Shutter shall be partly grilled and partly paneled and pull and push type. Sqm 40 3,852 154,080
Rates in Words:
10.04.2 shutter shall be partly grilled and partly paneled, mechanically operated with a pair of handles. Sqm 10 5,653 56,530
Rates in Words:
Fabricating and fixing SS railing of 304 grade made out of round pipes, square or rectangle sections in satin / brush finish with supporting fittings made out of SS
304 grade fixing with mechanical anchor fastener of stainless steel etc. on concrete surface, brick surfaces or floor including bending and bends as per the drawing
10.09 with best quality finish as per the approval of Architect and as directed by engineer-in-charge.
Rates in Words:
Sum Carried over to Summary page 19,424,554
SECTION 11-PAINTING WORK
White wash with lime on any surfaces (3 coats with brush) to give an even shade at all heights and all levels., including thoroughly brooming the surface to remove all
11.01.a Sqm 100 44 4,400
dirt, dust, mortar drops and other foreign matter etc. complete.
Rates in Words:
Providing and applying three coats of plastic emulsion paint of approved make, colour & shade (first two coats with brush and final coat with roller), on newly dry
interior plastered surface at all heights give an even shade, including white cement based putty of Birla white or equivalent after thoroughly brushing the surfaces free
from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth etc. after applying every coat of putty. Priming
coat of cement primer (water or solvent based) is to be applied on putty etc. complete as directed by engineer-in-charge. Sample to be approved before starting of the
11.03.a work. The rates shall include the cost of filler for filling the cracks on surface. Sqm 82,793 113 9,355,609
Rates in Words:
Providing and applying three coats (first two coats with brush and final coat with roller) of pearl lusture paint of approved make, color & shade), on newly dry interior
plastered surface at all heights give an even shade, including white cement based putty of Birla white or equivalent after throughly brushing the surfaces free from
mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth etc. after applying every coat of putty. Priming coat
of cement primer (water or solvent based) is to be applied on putty etc. complete as directed by engineer-in-charge. Sample to be approved before starting of the
11.03.b work. The rates shall include the cost of filler for filling the cracks on surface. Sqm 45,265 144 6,518,160
Rates in Words:
Providing & applying External 100% Acrylic Paint of desired shed from Apex of Asian paint or equivalent in minimum three coats to give an even shade with brush
on exterior sand faced plastered surfaces / mala plastered surfaces or any surfaces at all heights including scaffolding, thoroughly brushing the surfaces with sand
11.05.a paper to make it free from mortar dropping and other foreign matter etc. complete as per the manufacture's specification and up to the satisfaction of Engineer in Sqm 2,427 129 313,083
charge. The rate shall also include the cost of filler for cracks on the surfaces.
Rates in Words:
Providing and applying External finish of average 1.5 to 2 mm thick acrylic polymer based texture of "Ruff & Tuff" finish of NITCO, or equivalent make with standard
tool and applicator as specified by company, on exterior surfaces at all heights including scaffolding to give even shades including througly brushing the surfaces free
from mortar droping and other foreign matter and sand papared smooth with two coats 100% Acrylic Paint etc complete as per the manufacture specifications and to
11.06 the satisfaction of Engineer In charge or architect. The rate includes making of grooves, pattas etc. and finishing. Sqm 0 407
Rates in Words:
Providing and applying solvent based Silicone paint as directed with a minimum 5 years guarantee on stamp paper to the employer directly. (The Contractor should
11.08 specify the % concentration of silicone while quoting the rate.)Minimum 7 % concentration of silicone shall be manintained while diluting with additives.
Rates in Words:
Sum Carried over to Summary page 33,373,350
SECTION 15-GENERAL DEVELOPMENT WORK
Box cutting the road surface, to proper slope and camber, for making a base for road work, including rolling, removing the excavated stuff and depositing as
15.02 directed anywhere within site, etc. complete as directed by engineer-in-charge. Cum 1,103 135 148,905
Rates in Words:
Providing and laying cast in situ RCC M20 curbing of approximate size of 40cm height X 15cm wide, including necessary excavation and backfilling, laying 75 mm
thick PCC 1:5:10 (1 part cement : 5 parts sand : 10 parts stone aggregate 20/37 mm. down size), exposed shuttering, rendering, curing, filling in the joints with rich
15.17 cement mortar but excluding reinforcement as directed etc. complete as per the details and drawings and as directed by engineer-in-charge Rmt 5,882 446 2,623,372
Rates in Words:
Providing and laying Precast RCC M20 curbing of approximate size of 60cm height x 40cm wide X 15cm thickness, including necessary excavation and backfilling,
laying 75 mm thick PCC 1:5:10 (1 part cement: 5 parts sand: 10 parts stone aggregate 20/37 mm. down size), exposed shuttering, rendering, curing and filling
15.18 bituminous mastic in expansion joints but excluding reinforcement as directed etc. complete as per the details and drawings and as directed by engineer-in-charge Rmt 12,819 665 8,524,635
Rates in Words:
Providing and laying metal soling in a compact manner for granular sub-base in single layer including supplying and spreading of large size machine cut stone
aggregates 40 mm.and down size, spreading the same in required grade and camber in one or more layer. Filling the voids with good quality murrum to make plain
15.19 surface, profusely watering including consolidating by power driven roller of 8 to 10 ton capacity in required camber, dry and wet rolling etc. complete as directed by Cum 50 1,110 55,500
engineer-in-charge.
Rates in Words:
Providing & marking 10/15 cms wide 2.5 mm thick thermoplastic patta of yellow or white on the road surface etc. comp. As. Directed. Rate includes brushing,
15.20 Sqm 420 648 272,160
brooming & cleaning and application of paint.
Rates in Words:
Providing and laying brickbat chharu over sub base including spreading in uniform layer of 50 mm thickness, consolidating with plate compacter, watering and
15.21 finishing in level and slope as shown in the drawing or as directed by Engineer-In-Charge. Sqm 10,057 56 563,192
Rates in Words:
Pitching with available stones of minimum size 150x150 mm in elevation at site in slope and floor as required according to site condition to stop erosion including
15.22 filling the joints and pointing with cement mortar 1:6 as approved by Architect and directed by engineer in charge. Rate includes dressing and cleaning of the existing Sqm 4,646 267 1,240,482
surface.
Rates in Words:
15.23 Providing & marking Zebra Crossing, Straight and turning arrows and STOP or other letters with 2.5 mm thick thermoplastic paint of yellow or white on the road Sqm 79 698 55,142
surface etc. comp. As. Directed. Rate includes brushing, brooming & cleaning and application of the paint.
Rates in Words:
15.24 Cuting, Transporting and Fixing granite cobbles curbing of size (300mm wide x 300 mm height x 150 mm thick) including necessary excavation and backfilling, Rmt 100 422 42,200
laying 75 mm thick PCC 1:5:10 (1 part cement: 5 parts sand: 10 parts stone aggregate), filling in joints with rich CM etc. complete as per the details and drawings and
as directed by engineer-in-charge. The rate shall be inclusive of collecting the stones / boulders from anywhere within site, installing, operating and maintaining stone
cutting machine, cutting the stone as per required size and shape, transporting the finished stones to required location, fixing the granite cobbles with CM, filling of the
joints, earth work and laying PCC etc. complete.
Rates in Words:
Providing and installing Textile Architecture for stadiums, stands, shoppings, logistic centres, walkways, carparking, swimming pool etc. by using FERRARI or
15.25 equivalent composite membrane made up of weave of high-tenacity polysester base yarn material of approved shade and quality by Architect and Engineer-in- Sqm 1,300 4,974 6,466,200
charge . The material should have properties like long lasting mechanical resistance, dimensional stability, flexiblity, non fading, UV resistant, flame retardant, ease of
fitting. The material shall be delivered in manufacture's original unopened containers and packaging with labels clearly identifying product name and manufacturer. It
should be stored in dry and clean indoor areas and handling in such a way to prevent damage in accordance with manufacture's instructions. Contractor shall submit
manufacturer's maintenance and cleaning manual, manufacurer's certificate etc. Work shall be executed as per the drawing in best workmanship manner upto the
satisfaction of Architect or Engineer-in-charge.
Tender Documents
Aga Khan Academy, Hyderabad
1 Section 01 14,481,041
2 Section 02 20,645,479
3 Section 03 4,161,815
4 Section 04 9,400,925
5 Section 05 28,055,221
Amount in Words:
Please read this Abstract in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.
Page 11 of 55
02.12.09
BILL OF QUANTITIES - PLUMBING WORKS
Sr. No. Item Description Unit Quantity Rate Amount
SECTION - 1.00
Providing and fixing galvanized iron (GI) mild steel tube (Heavy
grade Class C) of Tata make, conforming to IS: 1239, including tube
fittings of R Brand such as sockets, unions, reducers, long or short
bends, elbows, nipple, flanges, check-nuts, tees, etc., complete (in
proper line and level, with necessary supports viz., clamps of Chilly
make with m.s.brackets, RCC or brick masonry pedestals and battens,
1.01.a
if required) jointing with screw joints, using hold tight and jute for pipes
and Teflon tape for fittings and fixtures, open laid to wall, ceiling and
floor including making them good, testing and wrapping the pipes and
fittings with Hessian cloth and painting with 2 coats of approved paint
etc complete to the satisfaction of EIC of the following nominal bore
(NB) size:
Providing and fixing galvanized iron (GI) mild steel tube (Heavy
grade Class C) of Tata make, conforming to IS: 1239, including tube
fittings of R Brand such as sockets, unions, reducers, long or short
bends, elbows, nipple, flanges, check-nuts, tees, etc., complete (in
proper line and level, with necessary supports viz., clamps of Chilly
make with m.s. brackets, RCC or brick masonry pedestals and
1.01.b
battens, if required) jointing with screw joints, using hold tight and jute
for pipes and Teflon tape for fittings and fixtures, Concealed laid to
wall, ceiling and floor including making jaries and refinished jaries,
testing and wrapping the pipes and fittings with Hessian cloth and
painting with 2 coats of approved paint etc., complete of the following
nominal bore (NB) size:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
12 of 55
Sr. No. Item Description Unit Quantity Rate Amount
1) 40 mm rmt 0 286
Rate in words:
2) 25 mm rmt 8 204 1,632
Rate in words:
3) 20 mm rmt 412 145 59,740
Rate in words:
4) 15 mm. rmt 1,220 116 141,520
Rate in words:
Providing, fixing and testing, heavy quality gun metal or brass gate full
way wheel valve of Zoloto / Leader make with screwed/flanged ends,
1.04.a
factory tested at 20 kg/m2., on GI lines etc complete to the satisfaction
of EIC of the following nominal bore (NB) size:
Providing, fixing and testing, heavy quality gun metal or brass non-
return swing type valve Zoloto / Leader make, with screwed/flanged
1.05.a
ends, factory tested at 20 kg/cm2.,etc complete to the satisfaction of
EIC of the following nominal bore (NB) size:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
13 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Rate in words:
2) 25 mm no. 5 3 297 16,485
Rate in words:
Providing, fixing and testing, heavy quality gun metal or brass ball
cock heavy duty of approved make with screwed ends, factory tested
1.05.c
at 20 kg/m2., etc complete to the satisfaction of EIC on GI lines of the
following nominal bore (NB) size:
Rate in words:
Rate in words:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
14 of 55
Sr. No. Item Description Unit Quantity Rate Amount
4) 150 mm no. 2 12 675 25,350
Rate in words:
5) 100 mm no. 5 8 941 44,705
Rate in words:
Rate in words:
Rate in words:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
15 of 55
Sr. No. Item Description Unit Quantity Rate Amount
i) 560 mm x 450 mm - Hindustan make Cat. No. 10008 VIKING no. 30 4 100 123,000
Rate in words:
ii) 630 mm x 500 mm (oval-under counter type). - Hindustan make
no. 124 6 483 803,892
Cat. No. 10045 RAPHSODY
Rate in words:
i) 560 mm x 450 mm - Hindustan make Cat. No. 10008 VIKING no. 99 4 229 418,671
Rate in words:
ii) 630 mm x 500 mm (oval-under counter type). - Hindustan make
no. 174 6 757 1,175,718
Cat. No. 10045 RAPHSODY
Rate in words:
Rate in words:
Rate in words:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
16 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Rate in words:
Providing and fixing, screw down brass chromium plated long body
bib taps, of Jaquar make Continental series Cat. No. 107 heavy
2.11.b no. 24 815 19,560
quality, of approved make, on GI lines, of 15 mm. dia., with or without
extension piece and flange etc complete to the satisfaction of EIC
Rate in words:
Rate in words:
Providing and fixing brass chromium plated heavy quality wash
basin mixer pillar-tap/cock of Jaquar make Florentine series Cat
2.13.a No. 5167 on water supply pipelines of 15mm dia with or without no. 286 2 691 769,626
extension piece but with a flange, etc., complete to the satisfaction of
EIC.
Rate in words:
Rate in words:
Providing and fixing 15mm NB CP brass heavy quality wall or floor
mounted sink tap, swivel type, with CP wall flange, casted spout of
2.14 no. 125 1 334 166,750
Jaquar make Florentine series Cat. No. 5357 etc. complete to the
satisfaction of EIC
Rate in words:
Providing and fixing best Indian make mirror of specified size like
Modi float, Sain Gobin, I.A.G or equivalent silvered locally, with plain
edge as required, with 12mm thick marine plywood backing, with CP
2.15 sqm 355 693 246,015
brass caps, etc., complete. Teakwood beading of 20mm x 32mm size,
with French polish or 3 coats of paint etc. complete to the satisfaction
of EIC
Rate in words:
Providing and fixing a CP brass Towel-ring of Jaquar make
Continental series Cat. No. 1121 with concealed type brackets fixed
2.16.b no. 436 740 322,640
to the wall with CP brass screws, etc., complete to the satisfaction of
EIC
Rate in words:
Providing and fixing a CP towel-rack, 230 x 600mm size of Jaquar
make Continental accessories Cat. 1181 with concealed type
2.16.c no. 269 2 458 661,202
brackets fixed to the wall with CP brass screws, etc., complete to the
satisfaction of EIC
Rate in words:
Rate in words:
Rate in words:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
17 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Rate in words:
Rate in words:
Providing and fixing a heavy quality CP brass stopcock
(concealed with sheet flange) of 15mm dia. of Jaquar make Cat.
2.19.b.2 no. 31 1 060 32,860
No. 5083 on water supply pipe lines etc. complete to the satisfaction
of EIC
Rate in words:
Rate in words:
Rate in words:
Providing and fixing Hand Shower (Health Faucet) of Jaquar
make Allied series Cat. No. 573 with angle valve of Jaquar make
2.39 Florentine series Cat. No 5053 with CP flange with 8 mm dia., 1 m no. 378 2 126 803,628
long PVC tube and wall hook of approved make etc. complete to the
satisfaction of EIC
Rate in words:
Sum Carried over to Summary page 20,645,479
Section - 3.00
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
18 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Rate in words:
Providing and fixing in position PVC rain water inlets with gravel
guard grating of Supreme / Prince make conforming to drawings
3.05.a no. 123 641 78,843
and fixed on the inlet of 160 mm dia pipe etc complete to the
satisfaction of EIC
Rate in words:
Providing and fixing in position PVC rain water inlets with gravel
guard grating of Supreme / Prince make conforming to drawings
3.05.b no. 300 396 118,800
and fixed on the inlet of 110 mm dia pipe etc complete to the
satisfaction of EIC
Rate in words:
Providing and fixing, to wall, ceiling and floor, SWR quality, heavy
duty, 6 Kg/cm² working pressure PVC pipes, of Supreme / Prince
make, open laid, for Soil / Waste / Rain water etc complete, jointing
with rubbering and airtight joints, with necessary specials, bends, such
3.08.a as `Y' junction, `T' junction (both single and double), including plugs,
shoes, cowls, flange compression type fittings, wall clips, etc. and
lubricant or jointing material, including testing, cutting, making good the
wall, ceiling and floor, etc complete to the satisfaction of EIC , The dia.
of pipes shall be of the following outer diameter(OD):
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
19 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Supply and fixing of stainless steel mosquito proof jali with required
3.10 fittings for over flow pipe of over head tank as per the requirement and no. 110 116 12,760
drawings etc complete to the satisfaction of EIC
Rate in words:
Sum Carried over to Summary page 4,161,815
Section - 4.00
Rate in words:
Rate in words:
Rate in words:
Rate in words:
Rate in words:
Rate in words:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
20 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Rate in words:
Rate in words:
Rate in words:
Rate in words:
Rate in words:
Rate in words:
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
21 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Rate in words:
Rate in words:
Rate in words:
Providing and fixing, CI steps in manhole, water tank, septic tank,
etc., of size 385 mm x 150 mm x 25 mm and painting with 3 coats of
4.09 no. 1,521 245 372,645
anti-corrosive paint, etc complete to the satisfaction of EIC (NECO
make)
Rate in words:
Sum Carried over to Summary page 9,400,925
SECTION - 5.0
Solar System : (300 Lts / day) Consisting following - Make : Sola Hart
5.01.a Job 58 164,674 9,551,092
made in Australia Model No. 302J
Rate in words:
Tank specification - Each unit consist of 300 ltrs storage tank with
compress puf insulation and ceramic lining from inside. Tank should be
fitted with sacrifical anode and soft flow stratifier for batte drain down
capacity. Pressure withstand capacity of each tank should be 15Kg /
cm2 and test pressure at 25 Kg/cm2
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
22 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Tank specification - Each unit consist of 180 ltrs storage tank with
compress puf insulation and ceramic lining from inside. Tank should be
fitted with sacrifical anode and soft flow stratifier for batte drain down
capacity. Pressure withstand capacity of each tank should be 15Kg /
cm2 and test pressure at 25 Kg/cm2
2) 80 Lts. Storage, 40 Lts / hour cooling capacity Model No. SDIx480 no 52 36,847 1,916,044
Rate in words: 0
Rate in words:
- Type : Downflow 0
- Output/Reg.Base on 350PPM : 300 M3/Regeneration 0
- Max. Flow Rate Lts / Hr. : 40 M3 / Hr. 0
- Salt Required / Regeneration : 270 Kg 0
- Max. Working Pressure : 2 - 2.5 Kg / CM2 0
- Treated water hardness : Less than 50-100 PPM as CaCo3 0
- Duration of Regeneration : 75 Minutes 0
Softener Vessel : MS / FRP 0
Resin : Cation Resins / Ion Exchange 0
Resin : Quantities 1800 - 2000 Lts 0
Raw water pump : Grundfos / Kirlosker make including 1 stand by
0
pump duly fully automatic valve / operating
Supply, erection, testing and commissioning of R.O. Water plant of
followings size : The supplier / Contractor shall submit the Technical
5.04
Data Sheet along with the bid. Makes : Jay Pumps / Ion Exchange
or Approved equivalent
1) 50 Lts / Hour Capacity Job 65 56,831 3,694,015
Rate in words: 0
- Skid : SS Frame 0
- Pre Filter : 20" x 2.5" x 20 Micron PP Filter USA 0
- Carbon Filter : 20" Activated carbon block filter 0
- Booster pump : 235 PSI pressure (2 Nos) 0
- Membrane : 75 GPD (5 Nos) 0
- Post carbon filter : 2 Nos. 0
- Water rejection : Less then 50 % 0
- Auto flushing : Solenoid valve 0
- Automatic ON / OFF : Floating switch 0
- Pressure gauge meter : Approved quality 0
- TDS Rejection : 90 to 95 % 0
2) 10 Lts / Hour Capacity Job 70 16,862 1,180,340
Rate in words: 0
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
23 of 55
Sr. No. Item Description Unit Quantity Rate Amount
- Skid : SS Frame 0
- Pre Filter : 10" x 5" x 20 Micron PP Filter USA 0
- Carbon Filter : 10" Activated carbon block filter 0
- Booster pump : 80 PSI pressure (2 Nos) 0
- Membrane : 75 GPD 0
- Post carbon filter : 0
- Water rejection : Less then 60 % 0
- Auto flushing : Solenoid valve 0
- Automatic ON / OFF : Floating switch 0
- Pressure gauge meter : Approved quality 0
Rate in words: 0
Rate in words:
Supply, erection, testing and commissioning of 300 Cu.M per Day RBC
based compact sewage treatment plant to match following parameters.
The system produces very little sludge– and that too in a completely
mineralized form convertible into garden compos. Including required
civil foundations / base pad, plumbing works, necessary electrification
with required strters/ panel for fully atomization. Refer the details
specification in the tender. (Excavation, PCC, RCC pump / Machine
foundations, bk. work, plaster, backfilling shall be measured and paid
for separately in relevant civil items).
5.06 JOB 1 3,563,007 3,563,007
It should match local pollution board land discharge norms. Also, the
contractor shall submit P & I diagram and tentative layout showing
overall size for space requirement alongwith offer. The overall hight of
plant shall not be exceed 3 mts from finished ground level and with
minimum area occupancy.
Make: Thermex / Naik Environmental Engineers Pvt. Ltd. The
supplier / Contractor shall submit the Technical Data Sheet along
with the bid.
Rate in words:
Sum Carried over to Summary page 28,055,221
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
24 of 55
Tender Documents
Aga Khan Academy, Hyderabad
2 HT Breaker 1,710,125
3 Transformer 5,775,699
4 Busduct 1,345,635
7 DG set 7,011,437
10 Cables 32,458,615
16 Earthing 2,726,223
18 Miscellaneous 213,793
Amount in Words:
Please read this Abstract in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 25 of 55
BILL OF QUANTITIES - ELECTRICAL WORKS
Sr. No. Item Description Unit Quantity Rate Amount
2.0 HT breaker
Supplying & Erecting Rubber mat 1.1 KV grade ISI marked 1000 x
5.6 No. 25 750 18,750
2000 x 6 mm size.
Supplying & Erecting Rubber mat 11 KV grade ISI marked 1000 x
5.7 No. 5 1,419 7,095
2000 x 12 mm size.
Providing and erecting danger notice board for medium voltage
5.8 installation to be erected as per I.S. The board should be 150 x 150 No. 12 121 1,452
mm.
Providing and erecting danger notice board for high voltage installation
5.9 No. 6 150 900
to be erected as per I.S.
Providing printed instruction chart both in English & REGIONAL
5.10 LANGUAGE & duly framed out on glass for treatment of person No. 8 415 3,320
suffering from Electric shock.
Providing pair of rubber hand gloves suitable for working on 11 KV/22
5.11 No. 2 506 1,012
KV supply.
5.12 Supplying Standard First aid box with all the Standard contents. No. 2 1,085 2,170
Supplying & Erecting 1.5 mtr. (5') x 0.9 mtr. (3.1') x 0.6 mtr. (2.1')
Floor mounted stand (For keeping 4 Nos.of buckets) made of 30 x 30 x
5.14 No. 2 1,265 2,530
4 mm. angle iron welded with 4 hooks and duly painted with one coat
of red lead & two coats of Approved enameled silver paints.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 26 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Wall hooks of 22 to 25 cms. projection for keeping fire buckets made
5.15 out of 15 mm. dia M.S. rod grouted in wall to a depth of minimum 15 No. 8 135 1,080
cms.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 27 of 55
Sr. No. Item Description Unit Quantity Rate Amount
6.1.26 Emergency Panel of Guest House No. 1 9,512 9,512
as per attached Single Line Diagram
6.1.27 Solar Panel of Guest House No. 1 13,523 13,523
as per attached Single Line Diagram
6.1.28 Main Panel of Student Longue No. 1 40,899 40,899
as per attached Single Line Diagram
6.1.29 Main Panel of Senior Academy No. 1 214,540 214,540
as per attached Single Line Diagram
6.1.30 Lighitng Panel of Senior Academy No. 1 78,305 78,305
as per attached Single Line Diagram
6.1.31 Computer Panel of Academy Building No. 1 16,945 16,945
as per attached Single Line Diagram
6.1.32 Emergency Panel of Senior Academy No. 1 11,967 11,967
as per attached Single Line Diagram
6.1.33 Sub LT Panel of senior Academy for lab No. 1 101,909 101,909
as per attached Single Line Diagram
6.1.34 Main Panel of Athletic centre No. 1 170,421 170,421
as per attached Single Line Diagram
6.1.35 Main Panel of Athletic centre- squash Building No. 1 43,321 43,321
as per attached Single Line Diagram
6.1.36 AC Panel of Athletic centre No. 1 82,057 82,057
as per attached Single Line Diagram
6.1.37 Emergency Panel of Athletic centre No. 1 11,747 11,747
as per attached Single Line Diagram
6.1.38 Main Panel of Health & Wellness centre No. 1 38,115 38,115
as per attached Single Line Diagram
6.1.39 Main Panel of Seminar block of Senoir Academy No. 1 64,020 64,020
as per attached Single Line Diagram
6.1.40 Emergency Panel of Seminar Block of Senior Academy No. 1 10,053 10,053
as per attached Single Line Diagram
6.1.41 Main Panel of Mech. Workshop No. 42,831
as per attached Single Line Diagram
6.1.42 Main Panel of common( Dinning) No. 1 226,645 226,645
as per attached Single Line Diagram
6.1.43 Emergency Panel of common( Dinning) No. 1 55,910 55,910
as per attached Single Line Diagram
6.1.44 AC Panel of common( Dinning) No. 1 143,430 143,430
as per attached Single Line Diagram
6.1.45 Main LT Panel for Transformer :1 No. 1 1,115,851 1,115,851
as per attached Single Line Diagram
6.1.46 Main LT Panel for Transformer :2 No. 1 1,406,669 1,406,669
as per attached Single Line Diagram
6.1.47 Main LT Panel for Transformer :3 No. 1 1,383,641 1,383,641
as per attached Single Line Diagram
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 28 of 55
Sr. No. Item Description Unit Quantity Rate Amount
6.1.58 Plumbing panel -1 No. 1 46,226 46,226
as per attached Single Line Diagram
6.1.59 Plumbing panel -2 No. 1 46,226 46,226
as per attached Single Line Diagram
6.1.60 300 KVAR APFCR Panel No. 3 483,187 1,449,561
as per attached Single Line Diagram
Sub Total 6.0..… 11,818,870
7.0 DG set
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 29 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Supplying,erecting, testing and commissioning of only VTPN D.B.
8.3.1 having suitable space for 250 A FP MCCB as incomer and 12 TP No. 12,578
MCBs as outgoing equivalent to MDS cat no 607822
Supplying,erecting, testing and commissioning of only VTPN D.B.
8.3.2 having suitable space 125 A FP MCCB as incomer and 12 TP MCBs No. 2 9,259 18,518
as outgoing equivalent to MDS cat no 607792
Supplying,erecting, testing and commissioning of only VTPN D.B.
8.3.3 having suitable space for 125 A FP MCCB as incomer and 8 TP MCBs No. 2 7,278 14,556
as outgoing equivalent to MDS cat no 607791
Supplying,erecting, testing and commissioning of only VTPN D.B.
8.3.4 having suitable space for 125 A FP MCCB as incomer and 4 TP MCBs No. 1 5,771 5,771
as outgoing equivalent to MDS cat no 607790
Excavation and back filling of cable trenches required for laying the
cables directly buried in the ground. This includes supplying and
9.1 RMt 4,275
providing cable markers at an interval of 10 meters. The depth shall be
app. 0.7mtr and the width shall be as per requirement.
Supplying and spreading fine sand for a thickness of 100 mm. and
9.2 providing and laying bricks for protection on cable on all the three RMt 14,250 285 4,061,250
sides.
Sub Total 9.0..... 4,061,250
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 30 of 55
Sr. No. Item Description Unit Quantity Rate Amount
10 Cables
Aluminium Cables
10.1 400 Sq.mm x 3.5C Al. Cable RMt 17,973 851 15,295,023
10.2 300 Sq.mm x 3.5C Al. Cable RMt 8,715 685 5,969,775
10.3 240 Sq.mm x 3.5C Al. Cable RMt 5,840 565 3,299,600
10.4 185 Sq.mm x 3.5C Al. Cable RMt 2,953 451 1,331,803
10.5 150 Sq.mm x 3.5C Al. Cable RMt 100 406 40,600
10.6 120 Sq.mm x 3.5C Al. Cable RMt 793 329 260,897
10.7 95 Sq.mm x 3.5C Al. Cable RMt 1,636 272 444,992
10.8 70 Sq.mm x 3.5C Al. Cable RMt 815 215 175,225
10.9 50 Sq.mm x 3.5C Al. Cable RMt 1,334 170 226,780
10.10 35 Sq.mm x 3.5C Al. Cable RMt 1,150 131 150,650
10.11 25 Sq.mm x 4C Al. Cable RMt 165 135 22,275
Copper Cables
10.12 16 Sq.mm x 4C Cu. Cable RMt 930 304 282,720
10.13 10 Sq.mm x 4C Cu. Cable RMt 8,975 212 1,902,700
10.14 6 Sq.mm x 4c Cu. Cable RMt 8,735 148 1,292,780
10.15 4 Sq.mm x 4c Cu. Cable RMt 7,645 113 863,885
10.16 2.5 Sq.mm x 4c Cu. Cable RMt 2,374 80 189,920
10.17 6 Sq.mm x 3c Cu. Cable RMt 100 129 12,900
10.18 4 Sq.mm x 3c Cu. Cable RMt 5,280 91 480,480
10.19 2.5 Sq.mm x 3c Cu. Cable RMt 2,085 66 137,610
10.20 1.5 Sq.mm x 3c Cu. Cable RMt 1,560 50 78,000
Sub Total 10.0..... 32,458,615
11 Cable Termination
Aluminium Cables
11.1 400 Sq.mm x 3.5C Al. Cable No. 54 2,585 139,590
11.2 300 Sq.mm x 3.5C Al. Cable No. 48 2,033 97,584
11.3 240 Sq.mm x 3.5C Al. Cable No. 28 1,745 48,860
11.4 185 Sq.mm x 3.5C Al. Cable No. 16 1,351 21,616
11.5 150 Sq.mm x 3.5C Al. Cable No. 4 1,340 5,360
11.6 120 Sq.mm x 3.5C Al. Cable No. 6 1,304 7,824
11.7 95 Sq.mm x 3.5C Al. Cable No. 8 1,112 8,896
11.8 70 Sq.mm x 3.5C Al. Cable No. 8 878 7,024
11.9 50 Sq.mm x 3.5C Al. Cable No. 22 234 5,148
11.10 35 Sq.mm x 3.5C Al. Cable No. 16 200 3,200
11.11 25 Sq.mm x 4C Al. Cable No. 16 171 2,736
Copper Cables
11.12 16 Sq.mm x 4c Cu. Cable No. 18 183 3,294
11.13 10 Sq.mm x 4c Cu. Cable No. 391 141 55,131
11.14 6 Sq.mm x 4c Cu. Cable No. 600 127 76,200
11.15 4 sq.mm x 4 c Cu. No. 511 120 61,320
11.16 2.5 sq.mm x 4 c Cu. No. 168 92 15,456
11.17 6 Sq.mm x 3c Cu. Cable No. 6 115 690
11.18 4 Sq.mm x 3c Cu. Cable No. 542 110 59,620
11.19 2.5 Sq.mm x 3c Cu. Cable No. 176 77 13,552
11.20 1.5 Sq.mm x 3c Cu. Cable No. 160 76 12,160
Sub Total 11.0..... 645,261
12 Cable Tray
Supply & Installation of hot dip GI ladder type cable tray with all
accessories like coupler, GI nut bolts,bend, tee, reduser etc as
12.1
per specification and drawings complete with all required
hardware :
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 31 of 55
Sr. No. Item Description Unit Quantity Rate Amount
12.1.1 150 x 50 made out of 2 mm thick RMt 970 317 307,490
12.1.2 300 x 100 made out of 2 mm thick RMt 1,250 480 600,000
12.1.3 450 x 100 made out of 2 mm thick RMt 345 531 183,195
12.1.4 600 x 100 made out of 2 mm thick RMt 270 594 160,380
Supply & Installation of hot dip GI Perforated type cable tray with
all accessories like coupler, GI nut bolts,bend, tee, reduser etc as
12.2
per specification and drawings complete with all required
hardware :
12.2.1 150 x 50 made out of 2 mm thick RMt 145 371 53,795
12.2.2 300 x 100 made out of 2 mm thick RMt 390 654 255,060
12.2.3 450 x 100 made out of 2 mm thick RMt 100 851 85,100
12.2.4 600 x 100 made out of 2 mm thick RMt 180 1,066 191,880
Sub Total 12.0..... 1,836,900
14 Internal Wiring
- DB to SB - 2.5sqmm for Phase & Neutral & 1.5 sqmm for Earth
14.1.6 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. No. 577 597 344,469
6/16 A x 250 V switch socket point on one switch box. (Approx two
14.1.7 No. 690 1,085 748,650
points in one circuits)
14.1.8 6/16A x 250 Volt switched socket outlet point for A.C./Geyser. No. 70 1,817 127,190
14.1.9 -Do- as above but switch and socket at different location. No. 6 2,061 12,366
Exhaust fan outlet point with 6A 5 pin socket controlled by one 5 single
14.1.10 No. 305 926 282,430
way switch located at different location.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 32 of 55
Sr. No. Item Description Unit Quantity Rate Amount
14.1.11 10A x 250V Metal clad socket outlet point with 10 Amp. SPMCB. No. 12 925 11,100
14.1.13 20 A x 250 Volt metal clad socket outlet point with 20 Amp. SPMCB. No. 15 1,000 15,000
32 A 5 pin x 415 Volt (3 Phase) Metal clad socket outlet point with 32
14.1.14 No. 12 3,555 42,660
Amp. FPMCB.
Buzzer point controlled by Bell push with modular type buzzer same
14.1.18 No. 90 1,053 94,770
make as switch
14.1.19 Bell point controlled by Bell push switch with bell of approved make. No. 70 950 66,500
SITC computer power supply point with 2 nos of 6 amp 5 pin plugs
14.1.20 with 1 no. of 16 Amp. Plug with 1 no 16 A Switch with indicator & No. 795 1,013 805,335
wiring of computer point.
14.2 MAINS :
The mains is considered from the meter/sub panel to the individual
distribution boards.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 33 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Additional fan rod made out of 10 guage GI pipe with all necessary
15.2.4 No. 598 105 62,790
painted and required accessories for fan suspention.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 34 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Sub Total 15.0..... 38,411,520
16 Earthing
Providing earthing stations for equipment earthing as shown and
16.1
specified in drawing for equipment complete with :
16.1.1 600 x 600 x 6.15 mm cu.plate No. 8 18,165 145,320
16.1.2 600 x 600 x 3.15 mm cu.plate No. 99 13,049 1,291,851
16.1.3 450 x 450 x 3.15 mm cu.plate No. 5 12,046 60,230
16.2 Earth wire/strips :
Supply and laying cu. earthing required size strips for interconnecting
the earthing stations, panels, DB's etc. in built up trenches, on
walls/ceiling, buried in ground generally as specified and shown on
drawings complete with :
a) Fixing accessories.
b) Corrosion protection of buried conductors with bituminous coating
and covered with PVC tapes.
16.2.1 25 x 3 mm cu. strip Rmtr 2,125 306 650,250
16.2.2 32 x 6 mm cu. strip Rmtr 160 772 123,520
16.2.3 50 x 6 mm cu. strip Rmtr 160 1,208 193,280
16.2.4 No.8 gauge bare cu. earth wire Rmtr 3,365 56 188,440
Earth Link : 38mm x 6 mm 1ft Long Cu.earth link fixed by necessary
16.2.5 No. 108 679 73,332
screws on wall.
Sub Total 16.0..... 2,726,223
17 Telephone And Data Distribution
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 35 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Supply & fixing of 20 pair tagblock with KRONE with fabricated CRCA
17.3.2 powder coated junction box of size 120x170x100 with two no. of pad- No. 25 1,075 26,875
lock.
Supply & fixing of 50 pair tagblock with KRONE with fabricated CRCA
17.3.3 powder coated junction box of size 260x225x100 with two no. of pad- No. 16 2,350 37,600
lock.
Supply & fixing of 100 pair tagblock with KRONE with fabricated CRCA
17.3.4 powder coated junction box of size 450x250x100 with two no. of pad- No. 4 4,202 16,808
lock.
Supply & fixing of 200 pair tagblock with KRONE with fabricated CRCA
17.3.5 No. 1 11,677 11,677
powder coated junction box of suitable size
Supply & fixing of 1000 pair tagblock with KRONE with fabricated
17.3.6 No. 1 61,648 61,648
CRCA powder coated junction box of suitable size
17.4 Telephone / DATA Point Wiring
18.1.3 Heavy gauge pipe in Open / Concealed manner minimum 50 mm dia. Rmtr 200 101 20,200
18.1.4 Heavy gauge pipe in Open / Concealed manner minimum 75 mm dia. Rmtr 365 150 54,750
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 36 of 55
Sr. No. Item Description Unit Quantity Rate Amount
5) Sprial/Coil Type Earthing and painting.
6) Excavation for erection of poles.
Supply & installation of 3.5 Mtr long GI street light pole with medium
19.1.2 class GI pipe duly pianted with two primer and coats of aluminium No. 505 7,734 3,905,670
paint complete with base plate complete in all respect with following
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 37 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Supplying, installing, testing and commissioning of one television point
20.4.1 to be done with television outlet socket and box of the APPROVED No. 152 208 31,616
make.
Sub Total 20.0..... 638,067
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 38 of 55
Tender Documents
Aga Khan Academy, Hyderabad
Amount in Words:
Please read this Abstract in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page 39 of
02.12.09 55
BILL OF QUANTITIES - IBMS WORKS
Sr. No. Item Description Unit Quantity Rate Amount
SECTION 1 - Fire Alarm System
ABS Plastic Junction Box with DIN rail & elmex 1.5 Sq.mm Terminals
1.15
with Lock & Key arrangement approved for outdoor use IP 66
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
40 of 55
Sr. No. Item Description Unit Quantity Rate Amount
FRPVC Medium Conduit to be laid concealed in ceiling/walls &
1.16 Flexible Conduits wherever required complete with Cable
glands,ferruls & end terminations
1.16.1 25mm Mtrs 23,270 52 1,210,040
1.16.2 32mm Mtrs 5,000 65 325,000
1.18 BACnet Integration Card with necessary Hardware & software Set 123,302
Beam Detector set (transmitter + Receiver) 70 Mtr x 15 Mtr with Power
1.19 Set 1 37,751 37,751
supply complete with test Switch & key.
Sub Total 1.0 16,676,595
2.0 Speakers
METAL GRILL speakers with line matching transformer for direct
connecting to 100/70 V output line.
2.0.1 6 Watts Output suitable for flush mounting Nos. 191 1,890 360,990
2.0.2 6 Watt Output wall mount with metal Box Nos. 783 2,521 1,973,943
20W ABS Weatherproof Horn speakers with 100V line matching
2.0.3 Nos. 50 3,530 176,500
transformer, IP66.
2.0.4 10W Wallmount Music cabinet speaker Nos. 224 2,963 663,712
2.1 Microphones
2.4.1 TCP/IP software server with GUI EN60849 & BS5839 part 8 compliant Set 1 117,661 117,661
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
41 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Stranded Copper conductor,PVC insulated ,FRLSPVC Sheathed 650
2.6
V as per IS 694.
2.6.1 2C x 1.5 mm2 Mtrs 14,630 36 526,680
2.6.2 2Cx 2.5 mm2 Mtrs 2,500 50 125,000
ABS Plastic Junction Box with DIN rail & elmex 1.5 Sq.mm Terminals
2.8
with Lock & Key arrangement approved for outdoor use IP 66
Vandalproof Outdoor pole Mount Pan, Tilt and Zoom (PTZ), Hi-
Resolution Mpeg4 video Day/Night and 23x optical 12x digital zoom
3.2 Nos. 12 219,997 2,639,964
with Ethernet (CAT5) TCP/IP communication port as per
specifications.
ABS Plastic Junction Box with RJ 45 Jack connection 2 way with Lock
3.11 Nos.
& Key arrangement approved for outdoor use IP 66
3.11.1 2 way with 2 Terminals Nos. 20 570 11,400
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
42 of 55
Sr. No. Item Description Unit Quantity Rate Amount
4.6 16 K(2KB) Contactless Smart Card with 2 Applications(iCLASS) Nos. 500 442 221,000
Central Work Station Server with Core 2 Duo Intel processor with
minimum 240 GB HDD, 2 GB RAM, 19" TFT Monitor, DVD Writer, two
4.9 serial and one parallel ports, multimedia speakers, infrared mouse; Set 1 554,396 554,396
Work station shall be preloaded with requisite MS Windows Licensed
software compatible with the BMS platform
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
43 of 55
Sr. No. Item Description Unit Quantity Rate Amount
ABS Plastic Junction Box with DIN rail & elmex 0.75 Sq.mm Terminals
4.12
with Lock & Key arrangement approved for outdoor use IP 66
NOVEC 1230 storage Tank & Valve assembly capacity suitable for
5.0 storage of following aqty of agent, Empty CCOE Approved with low 1 263,913 263,913
pressure switch provision & safety brust disc
5.1 Novec 1230 Fire Protection Fluid, OEM Factory Fill in Kgs Nos. 75 4,492 336,900
5.2 Tank Bracket Assembly Nos. 1 7,263 7,263
5.3 Single-Tank Swivel Adaptor, 2 in with Discharge Hose Nos. 1 32,532 32,532
5.4 Electric Actuator Assembly Nos. 1 34,100 34,100
5.5 Local Manual Actuator Nos. 1 11,311 11,311
5.6 Nozzle, Brass, Drilled ( 1.25 in) - 360 degree Nos. 4 9,827 39,308
5.7 Nozzle, Brass, Drilled ( 1.5 in) - 360 degree Nos. 2 10,444 20,888
Auto/Manual selector Switch with key lock arrangement in Glossy ABS
5.8 Nos. 1 5,811 5,811
Enclosure
LED type display sign board flashing with inbuilt Sounder "EVACUATE
5.9 Set 1 1,630 1,630
GAS RELEASED" & "DONOT ENTER"
5.13 Conventional Optical Smoke Detectors with Bases Nos. 6 1,028 6,168
5.14 Release cum Abort Switch with key & lock Nos. 1 11,477 11,477
Stranded Copper conductor,PVC insulated ,FRLSPVC Sheathed 650
5.15
V as per IS 694.
5.15.1 2C x 1.5 mm2 Mtrs 2,500 40 100,000
5.15.2 2Cx 2.5 mm2 Mtrs 55
ABS Plastic Junction Box with DIN rail & elmex 1.5 Sq.mm Terminals
5.16
with Lock & Key arrangement approved for outdoor use IP 66
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
44 of 55
Sr. No. Item Description Unit Quantity Rate Amount
5.16.1 4 way with 8 Terminals Mtrs 2 679 1,358
5.16.2 8 way with 12 Terminals Mtrs 1 1,077 1,077
FRPVC Medium Conduit with fittings & GI Saddle Spacers at every 0,3
5.17 Mtrs & Flexible Conduits wherever required complete with Cable
glands,ferruls & end terminations
5.17.1 25mm Mtrs 2,500 52 130,000
5.17.2 32mm Mtrs 65
Sub total 5.0…………… 1,381,738
SECTION 6 - WATER LEAK DETECTION SYSTEM
6 Water Leak Sensor Cable - 5 Mtrs long with end connections Lenghts 100 5,065 506,500
6.1 Piezo Sounder -White 65db Nos. 1 3,029 3,029
Water Leak Module with 230 VAC input & output inform of relay on
6.2 Nos. 100 11,543 1,154,300
water leak cable activation,housed is ABS Plastic Ju, Box - IP 66
FRPVC Medium Conduit with fittings & GI Saddle Spacers at every 0,3
6.4 Mtrs & Flexible Conduits wherever required complete with Cable
glands,ferruls & end terminations
6.4.1 25mm Mtrs 5,000 52 260,000
6.4.2 32mm Mtrs 65
Sub total 6.0……….. 2,054,829
SECTION 7 - EXTINGUISHERS
4.5 KG CO2 fire Extingusher with horn & sqeez grip handle,CCOE
7.0 Nos. 11 5,669 62,359
approved cylinder with wall mounting bracket .
5 Kg- ABC Type stored pressure fire Extingusher with safety brust
7.1 Nos. 15 3,688 55,320
disc & NRV for pressure gauge on wall with mounting bracket .
9 ltr Water Type cartridge operated with safety brust disc & NRV for
7.2 Nos. 198 2,142 424,116
pressure gauge on wall with mounting bracket .
Sub total 7.0…………… 541,795
SECTION 8 - NETWORKING
8.6 Outdoor Junction Boxes for Media convertors, Fiber LIU & Termination Nos. 18 1,983 35,694
8.7 6 Core Outdoor Steel Armoured Single Mode Optical Fiber Cable Mtrs 20,000 95 1,900,000
8.8 Fiber Pigtails - Single Mode (3 Meters) SC Type Nos. 456 947 431,832
8.9 Fiber Patch Cords - Single Mode Duplex (3 Meters) SC-LC Type Nos. 76 2,088 158,688
8.10 Rack Mount LIU - 12 Ports with SC-SC Type Adapters Nos. 20 9,364 187,280
8.11 Rack Mount LIU - 24 Ports with SC-SC Type Adapters Nos. 1 15,759 15,759
8.12 24 Ports CAT 6 PatchMax Panel Nos. 21 9,017 189,357
8.13 CAT 6 Patch Cords- 2 Meters Nos. 480 289 138,720
8.14 CAT 6 I/O Nos. 4 326 1,304
8.15 CAT 6 Cable to be laid in Medium Conduits Nos. 5,000 37 185,000
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
45 of 55
Sr. No. Item Description Unit Quantity Rate Amount
8.16 9 U - Wall Mount Network Nos. 20 6,736 134,720
8.17 42 U - 800 X 1000 Network/ Server Rack Nos. 1 53,851 53,851
8.18 RJ 45 Jack Holder with face plate & back Box Nos. 500 512 256,000
FRPVC Medium Conduit to be laid concealed in ceiling/walls &
8.19 Flexible Conduits wherever required complete with Cable
glands,ferruls & end terminations
8.19.1 25mm Mtrs 5,000 51 255,000
8.19.2 32mm Mtrs 57
Sub total 8.0…………… 6,421,813
SECTION 9 - Building Management System
9.0 IBMS Server and work station Hardwares
Central Work Station Server with Core 2 Duo Intel processor with
minimum 240 GB HDD, 2 GB RAM, 19" TFT Monitor, DVD Writer, two
9.0.1 serial and one parallel ports, multimedia speakers, infrared mouse; Set 1 87,119 87,119
Work station shall be preloaded with requisite MS Windows Licensed
software compatible with the BMS platform
9.0.3 600 dpi or better A3 size Ink Jet colour printer 1 28,512 28,512
9.1.2 Run time version BMS software for with license (edit feature) License 2 Inc
9.1.6.5 Field (Residence Blocks) Load Managers (MODBUS RTU over IP) Set 15 Inc
9.2.1.1 DDC 1 for ACAD Building Environmental System Set 1 44,533 44,533
9.2.1.2 DDC 2 for Sr ACAD Building Environmental System Set 1 21,019 21,019
9.2.1.3 DDC 3 for Jr ACAD Building Environmental System Set 1 21,019 21,019
9.2.1.4 DDC 4 for Sr ACAD Art Block Environmental System Set 1 21,019 21,019
9.2.1.5 DDC 5 for ACAD Building UPS System Set 1 21,019 21,019
9.2.1.6 DDC 6 for Jr ACAD UPS System Set 1 21,019 21,019
9.2.1.7 DDC 7 for Sr ACAD UPS System Set 1 21,019 21,019
9.2.1.8 DDC 8 for Nursery UPS System Set 1 21,019 21,019
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
46 of 55
Sr. No. Item Description Unit Quantity Rate Amount
9.2.1.9 DDC 9 for DG Set Set 1 33,499 33,499
9.2.1.10 DDC 10 for Electrical System Set 1 28,507 28,507
9.2.1.11 DDC 11 to DDC 24 - Fire and Leak Detection for 14 clusters Set 14 21,019 294,266
9.2.1.12 DDC 25 - Fire and Leak Detection for Resi Cluster Set 1 189,165 189,165
9.2.1.13 DDC 26 for Water Management Set 1 94,059 94,059
9.2.1.14 DDC 27 for ACAD FFG System Set 1 21,019 21,019
9.2.1.15 DDC 28 for Sr ACAD FFG System Set 1 21,019 21,019
9.2.1.16 DDC 29 for Jr ACAD FFG System Set 1 21,019 21,019
9.2.1.17 DDC 30 for Athletic Block FFG System Set 1 21,019 21,019
9.2.1.18 DDC 31 for Acad Server Room Fire Suppression System Unit 1 21,019 21,019
9.2.1.19 Xenta OP panels for each DDC above Unit 31 14,539 450,709
Expansion Modules compatible for processors offered under above
9.2.1 Unit
DDCs
9.2.1.1 With 4 UI & 2UO ( Universal Input/Outputs) Unit 31,310
9.2.1.2 With 8 UI & 4 UO ( Universal Input/Outputs) Unit 31,310
9.3 Pre Calibrated Field Devices
Scope shall cover installation with all necessary fixtures and protection
as per manufacturer's standards
9.3.1 For Environmental System
Duct mounted Resistance Temperature Detectors for TFA Leaving
9.3.1.1 Nos. 6 907 5,442
Temp
Wall Mounted Combined T+Rh Transmitter for Server Room and UPS
9.3.1.2 Nos. 5 8,390 41,950
Rooms
9.3.1.3 Wall Mounted Ambient T+Rh transmitter for outdoor duty Nos. 1 8,390 8,390
9.3.2 DG Room Instruments
9.3.2.1 Ultra Sonic Level Transmitter for 5 M rating installed on Day Tank Nos. 2 105,537 211,074
9.3.4.1 Absolute Pressure Transmitters - Borewell/Pumps Discharge Press Nos. 16 5,330 85,280
9.3.4.2 Ultra Sonic Level Transmitter for 5 M rating for UGR and ESR Nos. 2 105,537 211,074
9.3.4.3 water Differential Pressure switches Nos. 16 7,208 115,328
9.3.5 Fire Fighting System Instruments
9.3.5.1 Absolute Pressure Transmitters - Pumps Discharge Pressure Lot 8 5,330 42,640
9.3.5.2 Ultra Sonic Level Transmitters for 5 M rating for Fire Tank Level 5 105,537 527,685
9.3.5.3 water Differential Pressure switches Nos. 8 7,208 57,664
9.4 Calibration Work
Calibration of Field devices supplied under D : at site with
Lot 1 89,531 89,531
documentation
9.5 Cabling and Conduits
Stranded Copper conductor,PVC insulated ,FRLSPVC Sheathed 650
9.5.1
V as per IS 694.
9.5.1.1 8 c x 1.5 Sq.mm Mtrs 1,000 91 91,000
9.5.1.2 4c x 1.5 Sq.mm Mtrs 5,000 52 260,000
9.5.1.3 2c x 1.5 Sq.mm Mtrs 15,000 36 540,000
ABS Plastic Junction Box with DIN rail & elmex 1.5 Sq.mm Terminals
9.5.2
with Lock & Key arrangement approved for outdoor use IP 66
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
47 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Expanding Firestop Foam with upto 7 times expansion,repenetrable,to
9.6.1 protectagainst fire,smoke,& water complete with dispenser,mixer,& SQ.ft 50 5,226 261,300
cleaner.
Firestop Mortar -Fire resistance cement based thermal insulating
9.6.2 Kg 500 1,621 810,500
Compound for Cable tray penetration
Sub total 9.0………….. 8,034,172
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
48 of 55
Tender Documents
Aga Khan Academy, Hyderabad
Amount in Words:
Please read this Abstract in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09 Page 49 of 55
BILL OF QUANTITIES - FIRE FIGHTING WORKS
Sr. No. Item Description Unit Quantity Rate Amount
SECTION 1 - EXTERNAL FIRE FIGHTING WORKS
1 FIRE DOWNCOMMER SYSTEM
Providing and fixing short body double flanged cast iron, butterfly valve
complete with C.I. body, EPDM disc seal, SS retainer ring, carbon
1.3
steel disc & shaft and lever conforming to BS 5155 and suitable for PN
16 including companion flanges.
a) 100 mm dia Nos. 28 6,930 194,040
Providing and fixing double flanged cast iron type Dual plate spring
1.4 operated Check valve conforming to API 596/598 with CI body, CS
plate & SS spring & suitable for 16 kg /cm2. with companion flanges.
Providing, fixing and testing black mild steel G.I. Heavy duty (Class 'C')
pipes (IS:1239) and fitting like flanges, tees, elbows, bend junctions,
2.0
reducers etc, clamp structural steel supports as required / directed at
site including cutting and making all comp.
Providing & fixing fire single headed internal hydrant valve with
instantaneous Gun metal couplings of 63mm dia cast iron wheel ISI
2.3 Nos. 66 7,374 486,684
marked conforming to IS 5290 (Type-A) with blank Gunmetal cap and
chain as required.
Supplying and fixing TAC approved first aid hose reel including 30
meter long 20mm internal dia rubber lined hose reel tubing, 25 mm dia
stop valve, shut off nozzle of sufficient length at one end of this hose
2.4 Nos. 66 7,782 513,612
and leaded tin, bronze rings and adapter to get in to the instanta-neous
female coupling complete with suitable drawn brackets, hub etc as
required. the hose reel strictly confirm to IS:884 - 1985
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
50 of 55
Sr. No. Item Description Unit Quantity Rate Amount
Providing and fixing fire authority approved ball valves with S.S. ball,
2.6
PN 16 including all fittings required.
a) 25mm dia Nos. 86 818 70,348
Providing and fixing cast iron butterfly valves with EPDM seat
2.7 projection conforming to IS 5155, PN 16 including pipe flanges
complete in all respect.
a) 100 mm dia Nos. 37 6,930 256,410
Providing, fixing, testing and commissioning of single acting 25mm
2.8 dia., air release valve with all accessories,PN 16 including pipe flanges Nos. 31 1,663 51,553
complete in all respect
SUB TOTAL - SECTION 2 2,977,374
SECTION 3 - AUTOMATIC SPRINKLER SYSTEM
Providing and fixing of G.I. heavy duty (Class 'c' pipes (IS:1239 Part -
1), and fitting like flanges (MS steel flanges at every 15m length and as
required tees, elbows, bends, junctions, Reducers etc; clamps/
3.0 structural steel supports as required/directed at site including cutting &
making good the walls, RCC work etc. cutting chases & filling the
came with cement conc. 1:3:6 including painting the exposed pipes
with desired shade of enamel over a coat of primer.
The alarm shall start when the fire hydrant starts on fire duty. The fire
pump once started shall run continuously till manually switched off.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
51 of 55
Sr. No. Item Description Unit Quantity Rate Amount
SUB TOTAL - SECTION 4 435,405
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd.Page
02.12.09
52 of 55
ANNEXURE - I
RATES OF ADDITIONAL ITEMS
Sr. N0. Item description Unit Quantity Rate
1.16.a Same as item 1.16 above but using manufactured sand conforming to QRO Cum 855
relevant I.S. codes
1.18.b.1 Rebate over item 1.18.a.1 for using rubble available on site on as-is- QRO Cum 340
where-is basis. Rate shall include necessary cutting & sizing as
required.
1.18.b.2 Rebate over item 1.18.a.2 for using rubble available on site on as-is- QRO Cum 337
where-is basis. Rate shall include necessary cutting & sizing as
required.
2.01.3.a Same as item 2.01.3 but using manufactured sand conforming to QRO Cum 3 296
relevant I.S. codes in suitable proportion with river sand, based on mix
design with prior approval from consultants, subject to proportion of
manufactured sand not exceeding 67% of river sand.
2.01.4.a Same as item 2.01.4 but using manufactured sand conforming to QRO Cum 3 028
relevant I.S. codes in suitable proportion with river sand, based on mix
design with prior approval from consultants, subject to proportion of
manufactured sand not exceeding 67% of river sand.
2.01.5.a Same as item 2.01.5 but using manufactured sand conforming to QRO Cum 2 789
relevant I.S. codes in suitable proportion with river sand, based on mix
design with prior approval from consultants, subject to proportion of
manufactured sand not exceeding 67% of river sand.
2.12.1.a Same as item 2.12.1 but using manufactured sand conforming to QRO Cum 4 150
relevant I.S. codes in suitable proportion with river sand, based on mix
design with prior approval from consultants, subject to proportion of
manufactured sand not exceeding 67% of river sand.
2.13.1.a Same as item 2.13.1 but using manufactured sand conforming to QRO Cum 4 368
relevant I.S. codes in suitable proportion with river sand, based on mix
design with prior approval from consultants, subject to proportion of
manufactured sand not exceeding 67% of river sand.
2.14.a1.a Same as item 2.14.a1 but using manufactured sand conforming to QRO Cum 4 618
relevant I.S. codes in suitable proportion with river sand, based on mix
design with prior approval from consultants, subject to proportion of
manufactured sand not exceeding 67% of river sand.
4.11.a Rebate over item 4.11 for using rubble available on site on as-is- QRO Cum 340
where-is basis
4.13.a Rebate over item 4.13 for using rubble available on site on as-is- QRO Cum 339
where-is basis
4.14.a Rebate over item 4.14 for using rubble available on siteon as-is-where- QRO Cum 339
is basis
9.39.a Same as item 9.39 above but fixing tile with cement based polymer QRO sqm 1 331
adhesive like BAL or equivalent instead of 1:1 cement: sand mortar.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09
Page 53 of 55
ANNEXURE - II
2.09.b.2 Same as item 2.09.b but with minimum cement 288 Kg per cum + Cum QRO 6 691
flyash in required proportion.
2.12.1.b Same as item 2.12.1 but with minimum cement 260 Kg per cum + Cum QRO 4 074
flyash in required proportion.
2.13.1.b Same as item 2.13.1 but with minimum cement 288 Kg per cum + Cum QRO 4 136
flyash in required proportion.
2.14.a1.b Same as item 2.14.1 but with minimum cement 320 Kg per cum + Cum QRO 4 292
flyash in required proportion.
9.06.a 50 mm thick marble chips flooring (in-situ terrazzo flooring) rubbed Sqm QRO 1 292
and polished with different grade emery stones to achieve mirror
finish as per the drawing and design, under layer 38 mm thick
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 12.5 mm nominal size) and top layer 12mm thick with
marble chips of colour and sizes from 7mm to 10mm nominal size
laid in white cement marble powder mix 3:1 (3 white Cement : 1
marble powder) by weight in proportion of 2:3 (2 cement marble
powder mix : 3 marble chips) admixed with non-fading pigment of
approved shade and make by volume including cement slurry,
placing the homogenous mix in alternate panels and panels being
formed with glass strips and finishing the panels with approved
colour pigments. The rate shall be inclusive of mirror polishing of the
panels with different emery stones including cleaning with oxalic acid
or as directed by engineer in charge. (NO WAXING SHALL BE
PERMITTED). The rate should also include the covering & protecting
of flooring with plastic + POP or as required after completion of the
item until handing over to client and removing the same at the time
of handing over.
9.06.b 55 mm thick pebbled concrete using 10-15mm rounded river Sqm QRO 780
pebbles of approved shades as per design, under layer 40 mm thick
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 12.5 mm nominal size) and 15mm thick top layer using
10-15mm rounded pebbles laid in white cement admixed with
approved shade and make non-fading pigment, including cleaning
with water & oxalic acid as directed by engineer in charge.
9.12.a.4 Teak / Rainbow Sand Stone of 40mm thickness having Natural Sqm QRO 1 608
Finish.
9.12.a.5 Natural Slate Stone of 10-15mm thickness having Natural Finish of Sqm QRO 1 036
approved shade like red, peacock, rainbow, multi colour etc.
9.21 Providing & laying Flat, irregular natural sand stone (Agra red, Sqm QRO 1 996
Dholpur pink etc.) pieces 25-30 mm thick, roughly 600x600 mm size
of approved shade and quality, selected and sorted in floor as per
design in crazy pattern (with grooves). Stone is to be laid over
cement mortar 1:6 bedding of 35 to 50 mm thickness including
pointing with epoxy grout of approved shade in joints, curing and
cleaning upto the satisfaction of the Architect & Engineer-in-charge
etc. complete. The work shall be carried out as per the approval of
architect and satisfaction of engineer in charge. The rate should
include the covering & protecting of flooring with plastic + POP or as
required after completion of the item until handing over to client and
removing the same at the time of handing over.
9.34.a.1 Same as item 9.34.a but using manufactured sand conforming to Cum QRO 4 282
relevant I.S. codes in suitable proportion with river sand, based on
mix design with prior approval from consultants, subject to
proportion of manufactured sand not exceeding 67% of river sand.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09 Page 54 of 55
Sr. N0. Item description Unit Quantity Rate
9.34.a.2 Same as item 9.34.a but with minimum cement 260 Kg per cum + Cum QRO 4 206
flyash in required proportion.
9.41 Providing & fixing dado or cladding of following type of stone on wall
for all heights having specified thickness and size with grooves
(10mm) in both direction, filling the grooves with epoxy grout of
matching shade as per detail design and drawing. The stone shall be
fixed over 12 to 15 mm thick wired finish plaster in cement mortar
1:4 (1 cement : 4 coarse sand). The stone shall be fixed in 1:1
cement mortar. The rate shall also include backing coat wired finish
plaster of average 15 mm thick in cement mortar 1:4 (1 cement : 4
coarse sand). The work shall be carried out as per the cladding
sample approved by Architect and engineer in charge.
Please read this BOQ in conjunction with our covering Letter vide ref:SPCL/HYD/AKA-Main/Offer/09/09 dtd. 02.12.09 Page 55 of 55