Professional Documents
Culture Documents
Overview
Shock resisting steels are designed to have high impact resistance (toughness), along with other
properties such as strength, hardness. Silicon is a common addition to this class of steels, as it provides
tempering resistance, and increases toughness.[1]
Applications for shock resisting steels includes springs, as well as chisels, dies for forging, and
punches.[1] They are also used for screwdrivers and driver bits.[2]
Type C% Si % V% Cr % Mn % Ni % Mo % W%
S1 (UNS 0.15- 1.00- 0.10- 1.50-
0.40-0.55 0.15-0.30 <0.30 <0.50
T41901)[1][2][a] 1.20 1.80 0.40 3.00
SVCM
SVCM steel is an alloy of carbon, silicon, chromium, magnesium (Mg), nickel, molybdenum and lead
(Pb).[4] SVCM+ in addition is quenched and tempered achieving a high hardness (HRC 59).[4] SCVM+
has better torsional properties than chromium-vanadium steel (Cr-V).[5]
References
1. Isakov, Edmund (2007), Cutting Data for Turning of Steel, Industrial Press Inc., Chapter 1 § 1.5.2
Shock-resisting tool steels. pp.82-84
2. "Tool Steels - Shock-Resisting Tool Steels" (https://www.azom.com/article.aspx?ArticleID=6140),
www.azom.com
https://en.wikipedia.org/wiki/Shock_resisting_steel#SVCM 1/2
7/22/2020 Shock resisting steel - Wikipedia
3. Davis, Joseph R., ed. (1995), ASM Specialty Handbook: Tool Materials, p.123, Table 2.
4. "Screwdrivers | Hand Tools | Draper Tools"
(https://www.drapertools.com/category/190/Screwdrivers). www.drapertools.com.
5. "Common materials for hand tools:Carbon steel & Chromium-vanadium steel" (https://www.waittools.
com/common-materials-for-hand-tools/). August 14, 2018.
Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site,
you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a
non-profit organization.
https://en.wikipedia.org/wiki/Shock_resisting_steel#SVCM 2/2