Professional Documents
Culture Documents
Known Dimensions:
Please fill in yellow boxes with known dimensions: Pot Diameter, Pot Height and t1 (thickness of the skirt)
All other dimensions will be calculated by the program!
Height of combustion chamber, Gap A, Gap B, (see diagram below) the radius, volume etc.
Joint = 0.50 cm
Pot
Diameter 28 cm Determine Pot Volume and Circumference
Radius 14 cm Volume = (r2 *3.14)*H
Height 14 cm
Volume 8.62 Liter
Circumference 87.92 cm
D 28.00 cm
Determine Gap D
Gap Between edge of pot and skirt
r r 14.00 cm
Gap D => Gap C * 0.75
Gap D => 1.0 cm
Rocket Elbow
21.00 cm
Insulation
1.5 X
TH = X+1.5X+ 5 cm
21.00 cm
X = 11 32.50 cm
Chimney/Stand Dimensions
Length 70
of the Stand
70.0 cm
32.50 cm
32.50 cm
11 cm
dd 22 cm
Page 2
Skirt Dimensions
Skirt Circumference = 106.0 cm
Insulation 1.4 cm
11.0 cm TH 32.50 cm
22.0 cm
Page 3
1.) Cut a 110 mm square from the inside of 110 mm
the Top plate of 300.8 mm square
30.1 cm
27.5mm
3.) Height and length of the Skirt when the pot has a lip
=16.75
(Pot height + 2.06
Gap A)- 2*Gap D)
15.7
17.49 cm
17.5 cm
m
D
SKIRT =Pot diameter + Gap + Gap + 1 t1 (thickness of the skirt metal)*Pi +15 mm
D
300.7
Multiply the answer with 3.14
106.0 cm
Page 4
17.5 cm
.
14 mm
14 mm
Fill the slope from the combustion chamber up to 14 mm with a insulation material
a mixture of 1 part Height Temp cement and 1 part of sawdust
Insulation material:
1. Option: => Cement / Vermicutate => Ratio 1:4
2. Option: => Take 2 parts of fine grog (< 2mm) and 1 part fine clay and fire it
=> take 5 parts of Height temperature port and 1 part of cement this is called HTM 6
=> take 1 part of HTM 6 and mix it with 1 part of sawdust
1 0 cm
15 cm
10 3.3 cm
10.0 cm
Ash rake
500 mm
50 mm
8 mm round bar
Page 6
Measurements for the S
Househ
City Division Village Head of Household Sauspan No1 Diameter Height Radius Pot-Circumf Volumen X Gap
Stand-
B Height Stand-Length
22.0 74.0 ### 17.5 106.0 30.1 14 mm 28 14 14 87.92 8.62 11.00 32.50