Professional Documents
Culture Documents
machine
6. Which of the following device is not used for holding the work in a drilling machine?
A) step block
B) drill jigs
C) both step block and drill jigs
D) none of the mentioned
Answer: D
8. The drilling machine is the second most important machine tool in a workshop.
A) true
B) false
Answer: A
10. For drilling operation, the drill rotates with_____ pressure if job is held on earth.
A) upward
B) downward
C) 45 degree inclined to both planes
D) none of the mentioned
Answer: B
12. Which of the following operation is carried out to make the hole dimensionally more
accurate?
A) reaming
B) tapping
C) boring
D) none of mentioned
Answer: A
13. Reaming is carried out by using a reamer.
A) true
B) false
Answer: A
16. To produce more accurate holes, which of the following operation should be
performed third?
A) drilling
B) reaming
C) centering
D) boring
Answer: D
17. Which of the following operation is used to enlarge the previously drilled hole?
A) reaming
B) tapping
C) boring
D) none of mentioned
Answer: C
18. The speed at which the piece advances through the cutter is called
(A) Cutting speed
(B) Feed rate
(C) Depth of cut
(D) None of the above
Answer: B