You are on page 1of 3

FÉLIX RICARDO CANALES

Jr. Leoncio Prado 239 4to Piso La Colmena – Cajamarca Perú


Phone: 011-51-976226135
felixricardocanales@hotmail.com
pe.linkedin.com/in/felixricardocanales/

Mechanical Engineer, Bilingual (Spanish – English); MBA; More than seventeen years of
experience in mining in the following areas: Mine Maintenance, Training, and Budged and costs.
Experience in supervision, planning and management.

EXPERIENCE

MINERA YANACOCHA S.R.L. 2003 - to date

Yanacocha is the largest gold producer mine in Latin America, operated by Newmont Goldcorp
Mining Company.

Mine Maintenance General Supervisor 2020 – to date


General supervision in Mine Maintenance. Responsible for the maintenance works for all the
crew. Direct reports: The Field Supervisor (Field Crew) and the Shovel Supervisor (Shovels
Crew), In charge of the maintenance of the trucks, shovels, loaders and auxiliary fleet.
Management and development of staff, 26 workshop mechanics, 10 shovel mechanics, and 12
field mechanics. Achieving the following:
 Fulfillment with the weekly maintenance plan
 Zero harm, No accidents in maintenance works.

Expediting Supervisor 2019 – 2020


Administration, request and pay of the spares and parts that will be used in the maintenance of
the fleet. Administration of the Tools Shop. Budget and Forecast maker. In charge of 12
technicians.
 Half a million US dollars in useless parts save.
 Reorganization the area, personnel vs productivity.

Mine Maintenance Planner senior 2016 – 2019


Follow up daily and weekly plan for the truck fleet. Plan the preventive maintenance (PM), the
replacement program maintenance (PCR), and Backlogs (BL). Management the monthly
budged. Make up the annual truck budget,
 Get the availability for each term in the 793D y 793C truck fleet
 Accomplishment the truck annual budget.

Mine Maintenance Supervisor 2012 - 2016


Management and supervision of preventive maintenance of the off-road trucks, supervision of
corrective shop for trucks and loaders. Administration and development of the personal (in
charge of 37 mechanics), giving feedback and reports to the trucks General Chief.
 Achieve the “zero harm” goal during the past 24 months.
 Best rate for FSAPM 81.3 hours (first stop after the PM) in seven consecutive months.
 Increased productivity of trucks entering workshop, generating an increase of 0.5% of the
fleet availability.
 Improved accuracy in service based on equipment deliveries at scheduled times.
 Reduction of absenteeism by 5%.
 Staff development by raising the ratio of competencies from the current level of 70 to 80%.
 Improve the working environment of the area through effective leadership and good
management of interpersonal relationships.

Strategic Maintenance Planner Minas Conga 2011 –


2012
Administration of the pieces of equipment that Conga Mine purchased for the first stage of the
project (construction).Audit the contractors in charge of the installation, maintenance and
operation: Ferreyros, Choice and Fluor. Reports to Maintenance superintendent.
 Implementation of the OMAT Operability and Maintainability Analysis Technique for
Freightliners fleet.
 Increase the control for the contractors’ execution tasks, approximately 10% improvement.
 Design the Headcount for maintenance that was approved for the life of the project.

Budget and Cost planner 2009 –2011


Preparation of the headcount company wide. Human Resources (HR) budgeting and
expenditure control. Reports to the HR Superintendent.
 Design the annual budgets HR as well as forecast.
o Improvement of costumer budgeting areas.
o Implementing good practices or internal control , optimizing administrative and
operational processes
 Improved cost control processes in HR.
 Design the control for temporary labor costs.

Chief of Training Information Manage 2008 –


2009
Training Supervisor 2005 –
2008
Trainer 2003 –2005

ALSTOM POWER PERU S.A. 2002 - 2003


Hydropower supplies Company
Assembly and Services

EDUCATION
 Pontificia Universidad Católica del Perú
o Mechanical Engineering 2001
o Welding Engineering - 2nd in honor 2003
 Centrum Católica
o MBA Master of Business Administration 2012
 University Adolfo Ibáñez
o Management of Operations – eclass 2013
 University of Tennessee UTC- USA.
o English 2002

SOFTWARE KNOWLEGE:
Microsoft Office; Power user SAP; Power user Ellipse; Hyperion; Autocad

PERSONAL DATA
Status: Married with two children.
Hobbies: Reading. GYM

You might also like