Professional Documents
Culture Documents
point#.
NAV
1. Press the ABC key to show NAV2 Erasing the Track Lines: Anchor Watch:
6. Select Insert this WPT softkey then screen. 1. Press the key. (After the boat is anchored)
press the ENT key. 2. Press the EDIT key. 2. Press the EDIT key. 5. Highlight “Anchor watch: Off”.
7. Select another waypoint#. 3. Select Reset XTE softkey then 3. Select the Track plotter softkey 6. Press the ENT key to select the
8. Then press the ENT key. press the ENT key. then press ENT key. Change softkey.
9. Repeat steps 7 & 8 for additional Skipping Waypoint: 4. Select Erase track softkey then Cross-Track Error Alarm (XTE):
waypoints. 1
press ENT.
NAV
1. Pres ABC until NAV2 is displayed. 5. Highlight “XTE alarm: Off”.
10. Select Done then press the ENT 5. Press the EDIT key to end.
2. Press the EDIT key. 6. Press the ENT key to select the
key.
3. Select the Skip waypoint softkey Alarms Change softkey.
11. Select Route Name softkey then
then press the ENT key. Note: Don’t forget to press the EDIT
press the ENT key. Use the
4. Press the EDIT Key to exit. General Alarm Indicator icon key to finish alarm editing.
alphanumeric keys to name it.
Viewing the Alarm Log:
12. Select Done then press the ENT TIDE (AUX 11) F1-F4 Key Programming:
key. Press key to show AUX1 1. Select the desired display screen
13. Press EDIT key to finish. How to Add Tide Ports: screen. page by pressing the specific
1. Press the until the AUX 11 Clearing the Alarm Log: function key (POS, NAV, etc.).
Starting a ROUTE:
screen is displayed. 1. Press the key to show AUX1 2. Press and hold down the (or
2. Press the EDIT key. screen. other F# key) for 3 seconds.
1. Press the key to show RTE1 3. Enter the Port #, Place, Zone and
display. 2. Press the EDIT key
harmonic constants taken from 3. Release the key.
2. Press the EDIT key. 3. Select Reset log softkey then
an Admiraly Tide Tables vol. 1-2-3 press ENT key.
3. Press Insert Route softkey. Part III*. 4. When the key is pressed mo-
4. Press Insert forward or Insert 4. Press the EDIT key to exit. mentarily, the desired screen will
4. Repeat the process for additional
reverse softkey. tide stations. How to Set the Alarms: be accessed directly. Pressing
5. Press the EDIT key. 5. Press the EDIT key. longer than 3 seconds thereafter
1. Press the key.
will reprogram it.
To End or Turn ROUTE Off: Calculating Tide: 2. Highlight Alarms then press ENT
key.
1. Press the to show the RTE1 1. Press the key to show the AUX 3. Press the EDIT key.
display. 10 display. 4. Select the alarm to activate, name-
2. Press the EDIT key. 2. Press EDIT key ly:
3. Select Change softkey repeatedly 510-100-2003A