Professional Documents
Culture Documents
13
These tutorials will get you started working with the corridor modeling tools, which are used
to design and generate complex roadway corridor models.
If you have not installed AutoCAD Civil 3D to the default location, you may receive messages
in the Event Viewer indicating that subassembly macro paths are not found. To avoid these
messages, it is recommended that you follow the exercises in the order presented.
NOTE All drawings used in these tutorials are available in the tutorial drawings folder (page
819). If you want to save your work from these tutorials, save the drawings to the My Civil
Tutorial Data folder (page 819) so that you do not overwrite the original drawings.
For more information, see the AutoCAD Civil 3D Help topic Understanding Corridor Modeling.
NOTE This tutorial uses the corridor assembly that you built in the Creating an
Assembly (page 422) exercise.
A corridor model builds on and uses various AutoCAD Civil 3D objects and
data, including subassemblies, assemblies, alignments, surfaces, and profiles.
Corridor objects are created along one or more baseline alignments by placing
a 2D section (assembly) at incremental locations and creating matching slopes
that reach a surface model at each incremental location.
For more information, see the AutoCAD Civil 3D Help topic Creating Corridors.
459
Specify the dependent objects
Corridor .
3 When the ‘Select baseline alignment’ prompt is displayed, select the First
Street alignment.
4 When the ‘Select a profile’ prompt is displayed, select the blue, Finished
Grade Centerline - First Street profile.
1 In the Create Corridor dialog box, for Corridor Name, enter First Street.
2 In the RG-Primary Road Full Section - (1) row, in the End Station cell,
enter 0+440.00.
6 In the table, in the Object Name column, click <Click Here To Set All>.