Professional Documents
Culture Documents
6 1 PDF
6 1 PDF
1. INTRODUCTION
When a trouble is occurred in the machine, this section will help an operator to maintain the machine
with easy.
The trouble of machine is parted Hydraulic & Mechanical system, Electrical system and Mechatronics
system. At each system part, an operator can check the machine according to the troubleshooting
process diagram.
Mechatronics
GROUP 4
part
2 digit HRDT
(Machine) by Hyundai
Fault codes
displayed on
monitor display
3 digit INSITE
(Engine) by Cummins
If fault codes (2 or 3 digits) are displayed on the monitor, please contact Hyundai or
Cummins.
6-1
2. DIAGNOSING PROCEDURE
To carry out troubleshooting efficiently, the following steps must be observed.
of the machine.
6-2
STEP 4. Inspect the trouble actually on the
machine
In case that some trouble cannot be confirmed,
obtain the details of the malfunction from the
operator.
Also, check if there are any in complete
connections of the wire harnesses are or not.
6-3(1) 210-7
13031SH05
6-3(3) 210-7
6-3