Professional Documents
Culture Documents
Search... SEARCH
TOPICS
RELATED ARTICLES
How to rebind Heating and Hot Water valves to evohome Can I have an explanation of the evohome WiFi System? 11.54K
controller?
Where can I find an installation guide for the WiFi evohome
May 11, 2020 • Knowledge Article 4.59K
system?
QUESTION / PROBLEM
Can the evohome controller fire the boiler and hot water, but
How to rebind Heating and Hot Water valves to evohome controller? 525
also act as the thermostat for the underfloor heating system?
How to fix Comms Fault for heating valve?
Fault Logbook shows Heating Valve Comms Fault. How to fix it?
How to power up and bind the CS92 Wireless Cylinder Ther
2.5K
ENVIRONMENT mostat Transceiver to the evohome controller
evohome, comms fault, heating valve comms fault, rebind
ANSWER / SOLUTION Why is my hot water temperature raising over the set-point i
614
The heating Comms Fault message is referring to the system heating valve which opens when ANY heating comes on and in n my evohome system?
TRENDING ARTICLES
The most common reason for this is that the BDR91 Wireless Relay Boxes are positioned too close together or next to metal
Why is my Honeywell Home Wi-Fi device not connecting to the
items. Please find attached a document referring to the things to be taken in consideration when installing wireless heating
Internet?
controls.
See below how to rebind a heating valve to the system. The method below can only be used if a Hot Water Valve is bound so
Why does the thermostat make a buzzing noise?
Hot Water binding needs to be done first.
1. To access the " Installer Menu" on the evohome controller press the "SETTINGS" icon for approximately 3 seconds and
How to bind/rebind the BDR91 relay box to the CM921/CM927
then press the Green tick. wireless programmable room thermostat?
3. Click on Boiler Control, select NONE and press the green tick;
4. Go to "STORED HOT WATER" , click on "ENABLED" and the click on the green tick;
5. Select " HEATING VALVE BINDING" or "HOT WATER VALVE BINDING".
6. Put the Hot Water or Heating BDR91 in binding mode. Follow the steps from How to bind a BDR91 Wireless Relay Box to
the evohome controller
FILE 1
kAN80000000CaYXGA0_en_US_1.pdf
FILE 2
FILE 3
CONTACT SUPPORT
DOWNLOAD BROCHURE
CLICK HERE TO STAY INFORMED
CONTACT US
Terms Privacy Global Site About Honeywell Home Media Centre Change Language Unsubscribe
© 2018 Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Honeywell International Inc.