Professional Documents
Culture Documents
NHA SPECIFICATOIN (1998) For Construction Material PDF
NHA SPECIFICATOIN (1998) For Construction Material PDF
ITEM Subbase AGG. B/C ASP B/C ASP W/ C PROPERTIES OF ASPHALT MIX CONCRETE REQUIREMENTS TRAFFIC ROAD SIGNS item .607
N.M Size Str Metal Beam Guard Rail
GRADING OF COURSE AGG FOR CONCRETE FINE AGG item Cemt W/c CEMENT# item 401.2.1 ASTMC-150 Metal Posts Nuts and Bolts
CLASS Class of C/Agg Mini Slump mm item . 604.2 AASHTO M 180
(ASP B/C item#203.2) ASP ASP item #401.2 #401.2 Kg/m³ Ratio OPC TYPE 01 item - 607.2.3 ASTM- A 501
NHA Spec item NHA Spec item NHA Spec item NHA Spec item kg/ cm²
(ASP W/C itm#305.2) B/C W/C
#201.2 #202.2 #203.2 #305.2 A2,D1,D2, steel posts of minimum internal and external
Sieve # A" B" A" B" A" ~ B" A" ~ B" B, LEAN A3,C A1 Y Sieve Pasing A1 300 20mm 210 0.58 25-75 Air Content By Vol 12 max Yield Point Mini 3500 kg/ cm²
D3 diameters of sixty three (63) mm and seventy
2"1/2 100 Air Voids (%) 4~8 4~7 100 9.5mm 100 A2 350 25mm 245 0.58 100-150 Fineness m²/kg 160 mini five (75)
Tensile Strength Mini 4900 kg / cm²
Not more than 5%
2" 90~100 100 100 100 100 VMA (%) Mini 13.0 Mini 13.0 90~100 100 #04 95~100 A3 400 38mm 280 0.58 100-150 Air permeability 280 mint Tensile Strength Mini 400Mpa -58000 Psi
shall Pass#08
1".1/2 — — — — 90~100 100 Stability Kgs Mini 2250 Mini 1000 35~70 95~100 100 #16 45~85 B 250 51mm 170 0.65 25-75 Autoclave Expansion 0.8max yield Strength Mini 250Mpa -36000 Psi
Elongation in (2") Mini 12%
1" 50~80 55~85 70~95 75~95 — 75~90 100.0 Loss of Stability % Mini 25.0 Mini 20 0~15 − 95~100 100 #30 10~30 C 275 38mm 210 0.58 25-75 Strength Psi Elongation - 2" Mini 23%
3/4" — — — — 56~75 65~80 90~100 100.0 Flow 0.25mm0.01 in 12~21 8~14 − 35~70 − 90~100 100 #50 2~10 D1 450 25mm 350 0.40 50-100 3 Day 1740 Wide flange ASTM A 283 Grade D.
The bolted connection of the rail element to
1/2" — — — — — 55~70 — 75~90 Stripping test T- 182 Above95 Above95 0~5 − 25~60 − 90~100 #200 0~3 D2 500 25mm 425 0.40 50-100 7 Day 2760 the post shall withstand a two thousand two
3/8" — 40~70 30 - 65 40~75 — 45~60 56~70 60~80 Asphalt Content % Mini 3.0 Mini 3.5 10~30 − 20~55 40~70 F:M % D3 550 25mm 500 0.40 50-100 Setting Time Tensile Strength 415~550 Mpa hundred seventy (2270) kg pull at right angles
No. 4 35~70 30~60 25 - 55 30~60 23~40 30~45 35~50 40~60 0~5 0~10 0~10 0~15 2.3 ~ 3.1 Y 400 13mm 210 0.58 25-75 Initial Mint 45 yield Strength Mini 230 Mpa to the line of the railing.
REQUIREMENTS FOR ASPHALT CEMENT
No. 8 15~30 15~35 23~35 20~40 (AASHTO M-20) item- 301-2
PRIME COAT REQ FOR Medium-Cuing Type Asphalt item- 301-3 ( Lean 175 51mm 100 – – Final Mint 375 Elongation-2"Mini 23% Connections and Splices .All bolts and nuts item-
(AASHTO- M-82)
No. 10 — 20~50 15 - 40 20~50 — — — — Tack Coat Rapid-Curing item- Grouting of Bonded Steel :One part cement to 0.75 part sand .W/C Ratio .45 Maxi Elongation-8"Mini 20%
604.2.3 ASTM A 153
No. 40 — 10~30 8 - 20. 12~25 — — — — Penetration Grade TYPE 301-4(AASHTO- M-81) .strength 170Kg / Cm² after 7Day
Test Req Test Req Zinc coating g/m² 550 Mini
No.50 4~10 5~15 5~12 5~15 60~70 80~100 MC.70 MC.250 RC-70 Rc-250
REQUIREMENTS FOR EMULSIFIED ASPHALTS Sign Panels
Penetration at (25 oC)
No. 200 2~8 5~15 2 - 8. 5~10 3~6 2~7 2~8 3~8 60~70 80~100 Water, percent 0.2max 0.2max 0.2max 0.2max item 301-5 (AASHTO M-140) item 607.2.1 Coating thick (micron) 79 Mini
100g 5 sec.
Flash point, Cleveland Open Aluminium alloy conforming to
L.A.Abrasion (T-196) Max .50% Max .40% Max .40% Maxi .30% 232mini 232 mini Flash point (tag. open cup), Degree C 38 Mini 66 Mini − 27 Mini Test on Emulsions RS-1 RS-2 SS-1
Cup, (oC) ASTM- B 209 alloy 5052 - H38 Guard Rail Posts
— Ductility at (25 oC) 5cm per Kinematic Viscosity at 60oC (140oF) (See (A) item604.2.4 ASTM A -183
Soundness(T-104) Max . 12% Max . 12% Maxi . 12%
min, cm.
100 mini 100 mini Note 1) Centistokes
70~140 250~500 70~140 250~500 Viscosity,Saybolt Furol at (25oF)Sec 20~100 − 20~100 Tensile Strength Mini 270Mpa
Sand Equivalent(T-176) Min .25% Min.45% Min.45% Mini .45% Solubility in trichloroethylene % 99.0 99.0 Distillation test: Viscosity,Saybolt Furol at (50 oC)Sec − 75~400 − yield Strength Mini 220Mpa Yield Point Mini 250 Mpa
Thin-film oven test, 1/8 in.
C.B.R (T-193) Min. 50% Min.80% (3.2mm), (163 oC) 5 hr Loss on 0.8Max 1.0Max Distillate, percentage by volume of total distillate at 360oC Settlement 5 days, percent (a) 05 Maxi 05 Maxi 05 Maxi Elongation - 2" Mini 4% Tensile Strength Mini 400~550 Mpa
— — heating, percent
LIQLID LIMIT(T-89) Max .25% Max .25% Max .25% Max .25%
Penetration, of residue, % of
54mini 50mini at 190oC 20max 10max 10 Mini − Storage stability test 1 day (b) 01 Maxi 01 Maxi 01 Maxi Nuts and Bolts item -607.2.5 Elongation in (8") Mini 20%
original.
Ductility of residue at (25oC) 5 heavily galvanized quality ten (10) mm dia
Plasticity Index(T-90) Max . 6% Max . 6% Max . 6% Max . 4%
cm. per min., cm.
50mini 75mini at 225oC 20max 10max 50Mini 35Mini Demulsibility,35 m1. 0.02 NCaCl2 % 60 Mini 60 Mini − (G.I.) or aluminium alloy.galvanised according End or Buffer Sections
at 260oC to ASTM A 153. item - 604.2.2
Proctor (T-180) No Req No Req — — STONE FOR RIPRAP item 509.2.1 20~60 15~55 70 Mini 60Mini Cement mixing test, percent − − 02 Maxi
Moisture Content OMC±1 OMC±1 — — water absorption 6Maxi at 315 oC 65~90 60~87 85Mini 80Mini Sieve test, percent .10 Maxi .10 Maxi .10 Maxi zinc coating g/m² 550 Mini Yield Point Mini 227 Mpa
mini apparent specific
2.5mini mortar of
Residue from distillation at 360 oC (680 oF)
Specific Gravity (T-84 ) No Req No Req — —
Volume percentage of sample by difference 55 Mini 67 Mini 55 Mini 65 Mini Residue by distillation, % 55 Mini 63 Mini 57 Mini coating thick (micron) 79 Mini Tensile Strength Mini 310 Mpa
gravity ratio 1:3
Flat&Elogated Particles(D- — — Maxi 15% Maxi 10% L.A.Abrasion (T-196) 45Maxi Tests on residue from distillation Test on Residue from Distillation Test Reflective Sheeting item Bolts and nuts item
4791) 100~200 100~200 100~200
D60/D10 T-27 Min . 3% Min. 4% — — Class : A -Weight Kgs 15~25 20kg +50% penetration, 100g., 5 sec., at 25 oC 120~250 120~250 80~120 80~120 Penetration,(25 oC)100g.5 Sec 607-2 BSI 873 Part 6 604.2.3. requirements of ASTM A 307
Compaction(T-191) 98 100 97 97 Class :B -Weight Kgs 30~70 50kg +50% Ductility, 5 cm/min, cm (see note 2) 100 Mini 100 Mini 100 Mini 100 Mini Ductility, (25 oC), 5 cm/min. cm 40 Mini 40 Mini 40 Mini Minimum Coefficient of Retrofelection Type A B C
(Candelas per footcandel per square foot) Tensile Strength Mpa
FORMATION OF EMBANKMENT:item108.2 STONE PITCHING item 511.2.1 Class :C -Weight Kgs 60~100 80kg +50% Solubility in Trichloroethylene,% 99 Mini 99 Mini 99 Mini 99 Mini Solubility in trichloroethylene,% 97.5 Mini 97.5 Mini 97.5 Mini 415 415~690 400~550
( Mini
2nd
(D15Filter)>(4*
1st
condition
use AASHTO Class A-1, A-2, A-3, A-4 or A-5 soil as
D15Filter)<(4*D85Embankment)
Class : A - 20~25 Grade MC-70 Furol Viscosity Yield Point Mpa
20kg 60~120 60~120 Elastomeric Bearing Pads ITEM Elastomer for Deck Expansion Joint Seals Observation Entrance
specified in AASHTO M-145 or other material approved by 15~25 cm Class : A mini thickness 20 cm − −
ITEM 406.2.3 Angle (o) white yellow 50
the Engineer Weight Kgs +50% depth
at 50oC sec sec 406.2.5 Angle (o) Mini
CBR (T-193):05% Mini Swell value (0.5)%Maxi below TEST ASTM
D15Embankment)
CBR (T-193):07% Mini Swell value WATER BOUND MACADAM BASE Quantities of Materials for Bituminous Surface Treatments Tensile Strength, 127 Kgs/ cm2
ASTM A 153. (9.52mm AboveThick
GABIONS item 1 507.2 Elongation at break, percent ASTM D.412 350 Mini ASTM D 412 0.5 -4 95 62 305gm / m²(9.52mm underThick 259gm/m²
(0.3)%Maxi Compaction (T-191) 95 % ITEM 206.2 ITEM . 304-1 min.
pigment
Class 'A' , 'C compressive strength 4.88(6)
Coat with
thickness)(Length 1.5 Time of Width) 3000PSI kerbs Bed Compaction (3/4”) 0-5 0-5 0-5
(yellow) Chrome Yellow and
100% Pigment 6 Mini For heat activated material the adhesive shall
3.76(9) 91.5 5.740 4.135 5.740
Aggregate Bituminous material types are (a) asphalt Extenders
permit the reflective sheeting to adhere
90%Mini Mortar of ratio 1:3 Filler material Abrasion test (black) Chrome Black and
100% Pigment and extender 18~22 91.5 3.780 2.715 3.780
Stretchers (width 1.5 Time of thickness ) cement, (b) cut-back or emulsified and (c) Extenders securely forty eight (48) hours after application, 3.05(11)
(AASHTO T-96) asphalt cement, cut-back and emulsified. Modified Chlorinated Rubber at temperatures of up to ninety (90) degree
(Length 2~3.5 Time of thickness) CONCRETE PIPE item :501.2 (M-170) 3/8 100 Maxi (40%) 52±4% Ballotini 20Mini Concrete Posts: Class D1 )Steel Posts AASHTO M 183
Vehicle
liquid Limit Maxi Plasticized and Resin Blend Centigrade
(25) % and a P.I crushing value BS- Aggregate Pigment
linear foot Per
Headers:width mini 1.5 time thikness, length Class 2 4 #4 85-100 Specified Size (Size No&Passing) Solvents 45±4% 78 ~ 82 Deformed Billet-Steel Bars (Grades 40 and 60) for
Pound per
Maxi (6)% The reflective material shall be weather- Concrete Reinforcement- item. 404.2 - AASHTO M-
foot of
mini 2.5 time thikness( Mortar of ratio 1:4) .01"Crack Load 1000 2000 #100 10-30 soundness testing Size No Sieve (mm) Passing Additives 1- 3% Softening point White & yellow 65 ᵒc Mini resistant and following cleaning, shall show no 31 (ASTM A-615)
AASHTO T-104 Size No definite fading, darkening, cracking, blistering
n
Compositio
Paint