Professional Documents
Culture Documents
Summary
I am experienced water and wastewater treatment engineer currently based in UAE, working with Metito
overseas Ltd. as senior proposals engineer for water and wastewater treatment solutions since 2012. My work
with METITO coupled with my master’s degree (M.Sc) in water engineering has helped me to combine scientific
methods with management skills to achieve optimum solutions and best performance at work.
1. ACADEMIC
1.1 JORDAN UNIVERSITY OF SCIENCE AND TECHNOLOGY (JUST) - IRBID, JORDAN
JUST university is ranked as the top research university in Jordan & Middle East, and amongst top 500
universities on the world.
o M.Sc. of Water & Environmental Engineering - Civil Engineering Department (May-2011).
2. PROFESSIONAL CERTIFICATE
2.1 Surge vessel analysis Program by using numerical equations and KYPIPE software (version 2016) and
numerical equation — Metito, Sharjah (2016).
2.2 International Reverse Osmosis Certification (IROC) Program - international desalination association
academy — Massachusetts, USA (2013).
Area of Expertise
- Preparation of Technical Proposal and filling technical data sheets for tender submission.
- Prepare drawings (PID, layout, civil outline, SLD, others) for tender submission.
- Wastewater treatment process design calculations
- Desalination plant process design calculations
- Mechanical equipment sizing/selection
- Detail design engineering and coordination with engineering team.
- Surge vessels design and Hydraulic calculations related to pumping stations and treatment plants
- Prepare cost estimates for water/wastewater treatment systems
- Reading in details Tender specifications and drawings
- Coordinate with company different departments (process, electrical, mechanical, Civil etc.) to provide the
best solution for each particular case.
- Apply value engineering at the tendering stage which lead to a many successful stories as shown in next
section.
- Participating in execution of awarded projects, preparing rationalize budgets and negotiate with suppliers
Experience
Responsibilities
• Worked on various technologies related to water and wastewater treatment like reverse osmosis,
ultra-filtration, nano-filtration, extended aeration (EA), Moving bed bio reactor (MBBR), membrane
bioreactor (BMR), fixed film bio-reactor (FBBR), oxidation ditches and others.
• Successfully submitted number of key tenders with wide range of flow capacities (200 - 150,000
m3/day) such as:
A Turnkey project in ALMADINA - ALRAAS ALABYAD Area – KSA (8500 m3/day expandable to
25500 m3/day) – MBR
B Design, supply and install of Al-Rafha University Sewage Treatment Plant based on membrane
bioreactor (MBR) technology (20,736 m3/day-KSA)
C Design, supply and install of Al-Quwayiyah Sewage Treatment Plant based on oxidation ditches
technology (10,000 m3/d - KSA)
D Design supply and install of Al-Madina industrial city WWTP based on extended aeration
technology ( 5000 m3/day - KSA)
E Rehabilitation of Non-potable Well Field Stations and Installation of BWRO Mobile Units (Different
Capacities- Qatar) – turnkey based project
Responsibilities
• In charged of all environmental, Health and safety issues related to Project of Queen Alia
international road upgrading project which was one of the most prestigious projects in Jordan
A Ensured specific, national and international standards are observed
B Defined risks and hazards.
C wrote a daily and monthly reports summarizing the Environmental situation at site
D In charged of monitoring the right execution of excavation works
E Conducted statistical analyses and research studies on site
F Negotiated and managed the health, safety and environment budget
G Participated in public awareness campaigns
H Managed and assured the proper disposal of generated wastes at site; including Land
reclamation and reinstatement
I Prevented any damages for the natural resources and environment.
J Suggested technical solutions for many environmental-related problems at the site.
K Conducted periodic road safety audit for the whole project
L Ensured the implementation of new standards for the health, safety and environment.
Skills
• Working on special programs dedicated to water and environmental issues such as KYPIPE
Software, RO projection software like ROSA, AutoCAD, EPANET 2, SPSS, Arc GIS, MATLAB,
PMWIN, Modeflow, SMADA, and others.
• Superior Computer skills including ability to operate MS Office programs at highly proficient level
• Good analytical and problem-solving skill
• Focusing into details
• Teamwork, honesty and time management
• Highly motivated and results driven
• Good experience in electro-mechanical subcontracting fields
• Posses good communication, interpersonal and leadership skills
• Posses an effective oral and written communication skills