You are on page 1of 5

1.

Nur Husnina Binti Ahmad


NAME
2. Suba Cheancyraa A/P Sivakumar
0 3 D J L 1 8 F 1 0 0 4
REG. NUMBER
0 3 D J L 1 8 F 1 0 2 2
PROGRAMME/CLASS : DJL 5A / DJL 5B
COURSE / CODE : Power Plant Engineering 3 / DJL6033
ASSESSMENT : EOC 1 - Vapour Power Cycle (VPC)
DATE / DURATION : 1 Week
LECTURER : MOHAMAD PAUZI

A set of data for a steam power plant operates with a Rankine cycle is obtained as the
following:
Boiler pressure 11 MPa

Steam temperature 430C

High pressure turbine exhaust pressure 1.5 MPa

Reheat temperature 400C

Condenser pressure 0.007 MPa

Isentropic efficiency of high pressure turbine 85%

Isentropic efficiency of low pressure turbine 87%

a. Sketch and label the process cycle on the T – s diagram.


b. Assume the work done on the boiler feed-water pump is not neglected, determine the
following:
i. Total heat supplied.
ii. Total work output from both turbines.
iii. Thermal efficiency.
iv. Specific steam consumption.

You might also like