Professional Documents
Culture Documents
PCP-2 PL2019-BR-PCP-C2-KPE-MT-Q-001
Macaé-RJ 10070-3000-T29-4-0002
MATERIAL TAKE-OFF
1. INTRODUCTION 3
2. REFERENCE DOCUMENTS 3
4. GENERAL NOTES 3
This document presents material take-off (MTO) for piping hookup at PPG-1A for Oil Pipeline 16-inches PPG-1A / PCP-2.
2. REFERENCE DOCUMENTS
[5] ASTM A105 / A105M - Standard Specification for Carbon Steel Forgings for Piping Applications;
[6] ASTM A234 / A234M - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate
and High Temperature Service;
[7] ASTM A304 - Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements;
[8] ASTM A193 / A193M - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High
Pressure Service and Other Special Purpose Applications;
[9] ASTM A194 / A194M - Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High
Pressure or High Temperature Service, or Both;
[10] API STD 602 - Gate, Globe, and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural
Gas Industries;
[11] API STD 600 - Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets;
[12] ASTM A240 / A240M - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and
Strip for Pressure Vessels and for General Applications;
Values reported below are net values. No wastage, drop, surplus, or contigency has been considered. The values within this
report should be used for quotation purposes only. Issued construction drawings superseed any values within this report,
including, but not limited to quantities, weights, material section selections, material classes, and material grades.
Final material orders shall be verified against issued construction drawings.
4. GENERAL NOTES
NOM. QUANTITY
ITEM TYPE DESCRIPTION WEIGHT NOTES
SIZE
REV. 0 REV. A REV. B REV. C TOTAL
NOM. QUANTITY
ITEM TYPE DESCRIPTION WEIGHT NOTES
SIZE
REV. 0 REV. A REV. B REV. C TOTAL
NOM. QUANTITY
ITEM TYPE DESCRIPTION WEIGHT NOTES
SIZE
REV. 0 REV. A REV. B REV. C TOTAL
Bolts + 02
49 BOLTS STUD BOLT, ASTM A193 Gr. B7, 255mm LENGTH 1 1/2" 180.0 40.0 220.0 71
nuts
Bolts + 02
50 BOLTS STUD BOLT, ASTM A193 Gr. B7, 220mm LENGTH 1 1/4" 80.0 -40.0 40.0 8
nuts
Bolts + 02
51 BOLTS STUD BOLT, ASTM A193 Gr. B7, 215mm LENGTH 1 1/4" 0.0 48.0 48.0 9
nuts
Bolts + 02
52 BOLTS STUD BOLT, ASTM A193 Gr. B7, 110mm LENGTH 3/4" 104.0 -104.0 0.0 -
nuts
Bolts + 02
53 BOLTS STUD BOLT, ASTM A193 Gr. B7, 110mm LENGTH 5/8" 0.0 80.0 80.0 2
nuts
NOM. QUANTITY
ITEM TYPE DESCRIPTION WEIGHT NOTES
SIZE
REV. 0 REV. A REV. B REV. C TOTAL
Bolts + 02
54 BOLTS STUD BOLT, ASTM A193 Gr. B7, 90mm LENGTH 5/8" 24.0 -16.0 8.0 0
nuts
Bolts + 02
55 BOLTS STUD BOLT, ASTM A193 Gr. B7, 85mm LENGTH 3/4" 16.0 -16.0 0.0 -
nuts
56 NUTS HEX NUTS, ASTM A194 Gr. 2H, ASME B18.22 1 1/2" 360.0 -360.0 0.0
57 NUTS HEX NUTS, ASTM A194 Gr. 2H, ASME B18.22 1 1/4" 160.0 -160.0 0.0
58 NUTS HEX NUTS, ASTM A194 Gr. 2H, ASME B18.22 3/4" 208.0 -208.0 0.0
59 NUTS HEX NUTS, ASTM A194 Gr. 2H, ASME B18.22 5/8" 48.0 -48.0 0.0
69 ELBOW ELL 90, ASTM A105, 6000 LB, SW, ASME B16.11 1" 0.0 5.0 5.0 12
70 ELBOW ELL 90, ASTM A105, 6000 LB, SW, ASME B16.11 3/4" 0.0 3.0 3.0 7
NOM. QUANTITY
ITEM TYPE DESCRIPTION WEIGHT NOTES
SIZE
REV. 0 REV. A REV. B REV. C TOTAL
71 TEE TEE, ASTM A105, 6000 LB, SW, ASME B16.11 1" 0.0 2.0 2.0
72 TEE TEE, ASTM A105, 6000 LB, SW, ASME B16.11 3/4" 0.0 2.0 2.0
75 SWAGE SWAGE (CONC), ASTM A105, SCH 80, PBE 1"x3/4" 0.0 2.0 2.0
76 WELDOLET WELDOLET, ASTM A105, BW, Sch 80 2" 0.0 4.0 4.0
77 SOCKOLET SOCKOLET, ASTM A105, 6000 LB, SW 1" 0.0 2.0 2.0
78 SOCKOLET SOCKOLET, ASTM A105, 6000 LB, SW 3/4" 0.0 10.0 10.0
79 CAP CAP, 6000 LB, FPT, ASME B16.11 3/4" 0.0 3.0 3.0
Bolts + 02
80 BOLTS STUD BOLT, ASTM A193 Gr. B7, 65mm LENGTH 1/2" 0.0 8.0 8.0
nuts