Professional Documents
Culture Documents
Preset Winding Carriage Position: 15.03.2016 Hrahn
Preset Winding Carriage Position: 15.03.2016 Hrahn
15.03.2016 HRahn
Seite 1 von 4
JAGENBERG-GRUPPE
To Preset Service Mode must be activated. Therefore the Key switch in Main Desk +CD
must be turned to “ON” Position.
Emergency Stop must not be active and all Drives must be switched Off
Seite 2 von 4
JAGENBERG-GRUPPE
When Service Mode is active it is Shown on Main Screen in “Operation Mode” Field
The Preset value is the distance measured from the empty core to the contact roller.
Core radius
Seite 3 von 4
JAGENBERG-GRUPPE
The Contact Roller must be free (contact cylinder fully moved out).
Seite 4 von 4