Professional Documents
Culture Documents
IHdlCarEncPrst PDF
IHdlCarEncPrst PDF
15.03.2016 HRahn
Seite 1 von 4
JAGENBERG-GRUPPE
To Preset Service Key Switch must be activated. Therefore the Key switch in Main Desk
+CD must be turned to “ON” Position.
The Trolly Encoders can be Set even when Drives are running or Emergency Stop is
active.
Seite 2 von 4
JAGENBERG-GRUPPE
To Preset both Trollys must be at same Endposition and the Proxi-Switches DS+NDS
must be covered.
Rewinder Crane
Pos Pos.
Seite 3 von 4
JAGENBERG-GRUPPE
The Preset Values are defined in PLC and have been adapted to the mechanical Limits
during Commissioning .
When Preset was succsessfull the actual Value for both Encoders show the same value.
Seite 4 von 4