Professional Documents
Culture Documents
15.03.2016 HRahn
The Position is detected by the Motor absolute Encoder. The Preset is to be done via the HMI HW
Preset Page.
Seite 1 von 4
JAGENBERG-GRUPPE
To Preset Service Mode must be activated. Therefore the Key switch in Main Desk +CD
must be turned to “ON” Position.
Emergency Stop must not be active and all Drives must be switched Off
Seite 2 von 4
JAGENBERG-GRUPPE
When Service Mode is active it is Shown on Main Screen in “Operation Mode” Field
e.g. 557mm from Turret Disc to black Part Chuck Head means 0mm displayed
Seite 3 von 4
JAGENBERG-GRUPPE
Seite 4 von 4