Professional Documents
Culture Documents
Widepath ™
www.hoover.com
Fill in and Retain Owner’s ENGLISH ➜ pp. 1-14
This HOOVER deep cleaner is
designed for deep cleaning carpet,
Manual ESPAÑOL ➜ pág. 16-24
rugs, carpeted stairs and upholstery.
The model and serial numbers are
FRANÇAIS ➜ p. 26-34
located on the data label on the back
of the handle. Review this manual before
For your personal records, please
enter the COMPLETE model and serial
operating deep cleaner
numbers in the spaces provided and
retain this information.
Your deep cleaner is model
Important Safeguards!
When using an electrical appliance, always follow basic
and has serial number precaution, including the following:
READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.
Verification of date of purchase may • Use only on surfaces moistened by the cleaning process or small spills. Do
be required for warranty service of not immerse product.
your Hoover product. • Connect to a properly grounded outlet only. See “Grounding Instructions”.
• Do not clean over floor electrical outlets.
• Do not use without tanks in place.
• Use extra care when cleaning on stairs. Do not place deep cleaner on stairs.
• Use deep cleaner only for its intended use as described in the instructions.
• Use only attachments recommended by The Hoover Company; others may
cause hazards.
Index • The use of an extension cord is not recommended. If an extension cord is
Important safeguards . . . . . . . . . . 2 absolutely necessary, use at least a 16 gauge 3-wire cord which has a 3-prong
Assembly . . . . . . . . . . . . . . . . . . . 3-5 grounding type plug and a 3-pole receptacle that accepts the machine plug.
Carton contents. . . . . . . . . . . . . . 3 • Unplug deep cleaner when not in use. Turn off all controls before unplugging.
How to use . . . . . . . . . . . . . . . . . . 6-8 • Unplug before connecting the powered hand tool.
Agitator speed selector . . . . . . . 7 • Always disconnect cord from electrical outlet before servicing the deep cleaner.
Automatic “shut-off” . . . . . . . . . . 7 • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Deep cleaner description . . . . . . 6 • Never handle plug or appliance with wet hands.
Emptying the recovery tank . . . . 8 • Do not pull or carry by cord, use cord as a handle, close door on cord or pull
Filling the clean solution tank . 7-8 cord around sharp edges or corners. Do not run appliance over cord. Keep
How to clean cord away from heated surfaces.
After cleaning . . . . . . . . . . . . . . . 9 • Do not use with damaged cord or plug. If appliance is not working as it
Before you begin . . . . . . . . . . . . 9 should, has been dropped, damaged, left outdoors, or dropped into water, take
Carpet cleaning . . . . . . . . . . . . . 10 it to a Hoover Factory Service Center or Authorized Hoover Warranty Service
Cleaning bare floors . . . . . . . . . 11 Dealer.
Picking up spills . . . . . . . . . . . . 10 • Close supervision is necessary when any appliance is used by or near
Using the tools . . . . . . . . . . . . . 11 children. Do not allow deep cleaner to be used as a toy or to run unattended at
Attaching tools . . . . . . . . . . . . 11 any time.
Cleaning carpeted stairs. . . . . 12 • Do not point tools toward people or pets.
Cleaning upholstery . . . . . . . 13 • Use only commercially available floor cleaners intended for machine
Maintenance application. Do not use any type of wax with deep cleaner.
If you have a problem . . . . . . . . 14 • To assist In reducing drying time, be certain the area is well ventilated when
Lubrication . . . . . . . . . . . . . . . . 14 using detergents and other cleaners with this machine.
Service . . . . . . . . . . . . . . . . . . . 14 • Keep detergents and other cleaners out of children's reach.
Storage . . . . . . . . . . . . . . . . . . . 14 • Do not use to pick up flammable or combustible liquids such as gasoline or
Warranty . . . . . . . . . . . . . . . . . . . . 14 use in areas where they may be present.
• Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxic
material with this appliance.
• Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
• Avoid picking up hard, sharp objects with the deep cleaner. They may damage
the machine.
• Keep hair, loose clothing, fingers, feet and all parts of body away from
openings and moving parts.
• Do not put any object into openings. Do not use with any opening blocked;
keep free of dust, lint, hair, and anything that may reduce air flow.
• To help prevent matting and resoiling, avoid contact with carpets until they are
dry. Keep children and pets away from carpets until they are completely dry.
• Store in a dry place. Do not expose machine to freezing temperatures.
© 2002 The Hoover Company
www.hoover.com
2 Save these instructions!
Grounding
Instructions
D F
A
B G
1. Assembly
Carton contents
1-1
C D
Carpet Bare
Upholstery Pre-
Cleaner
floor
cleaner Cleaner
F
G H
A B
A. Deep cleaner
Contained in carton with hose:
B. Upper handle with powered hand tool
F. Hose
C. Bolts (2)
G. Stair/upholstery nozzle
D. Nuts (3 - one extra included)
H. Tool holder and screw (taped on rack under nozzle)
E. Hose holder
3
The assembled cleaner will look like this 1-3
drawing. Assemble handle
A1
1-2
A2
Attach hose holder Place nuts in recessed areas on back When handle sections are completely
of the hose holder. Hold each nut in together, squeeze trigger (C) on upper
Position hose holder (B) onto handle by place while tightening each bolt securely handle.
matching tabs on rack with openings on (from the front of the handle) with a You will hear a “snap” when the
back of handle. Make sure holes for Phillips screw driver. trigger rod is in place.
bolts are aligned.
Only two nuts are needed on this model.
The extra nut is not required but has
been provided for your convenience.
Replace clean solution tank (upper tank) Slide rack down into place. Insert screw
by positioning bottom first. Press on
Attach tool holder at (D) and tighten with a Phillips screw-
tank handle to snap top of tank into Remove tool and taped screw from driver.
place. holder.
Insert projections on holder into slots on
4 back of cleaner.
1-10 1-11 1-12
A2
F
E
Press cord into cord clip on back of Storing hose & tools Continue wrapping hose under lower
handle. Pull cord tight and wrap cord hook (E). Snap hose end fully into hold-
around hooks (A2). Store hose on holder by first positioning er (F).
hose in front section of clip. The hose end must be pushed com-
pletely down into holder (F) to ensure
maximum suction when cleaning
floors.
Position stair/upholstery nozzle in holder Powered hand tool To remove powered hand tool, pull it
at base of cleaner and snap it into place down and outward.
The powered hand tool is shipped in a
as shown at arrow. To reposition the tool, reverse this proce-
plastic bag for protection. Remove the
dure.
bag before using the tool by first open-
ing tool door.
1-16
5
2. How to use
The assembled deep cleaner will look like the drawing.
Deep Cleaner Description
2-1 1. Hand grip 14. Brush speed selector:
2. Solution trigger: press to slide selector to set brush
1 release clean solution. speed on HI, LO, or OFF.
3. Hose 15. Hood
2 4. Hose holder: wrap hose 16. Edge bristles: on both sides
5 around holder and top hose of the hood for cleaning
hook (6) for storage. close to edges of carpet.
3 5. Hose hook 17. Nozzle
6 6. Cord hooks: wrap cord 18. Cleaning mode indicator:
7 around hooks for storage. shows either floor or tool
The top hook can be rotated usage
8 right or left for quick and 19. ON/OFF pedal
easy cord release. 20. Handle release pedal: step
9
7. Powered hand tool on pedal to lower handle to
10 4 8. Carrying handle operating (floor) position;
9. Clean solution tank handle 21. Stair/upholstery nozzle
11 10. Clean solution tank cap/
12 measuring cup
11. Clean solution tank: holds This deep cleaner is intended
6
13 cleaning solution. for household use.
12. Recovery tank handle:
14 raise handle to unlock tank
21
for removal; lower handle
forward to lock tank into
18 position.
20
13. Recovery tank: holds dirty
16
15 solution.
19
17
Operate deep cleaner only at voltage specified on data plate on back of cleaner.
Plug deep cleaner into a properly grounded outlet.
Floor
C
Cleaning Mode
Tool
D
A B
6
2-5 2-6 2-7
E
Bru
sh
OF Sp
F e
LO ed
HI
Carry tank to a sink. Rotate tank cap Turn cap (A) upside down to serve as a
The tanks counterclockwise and lift up to remove measuring cup.
Clean solution tank cap. Using cap, measure detergent following
(upper tank) the chart below.
The clean solution tank holds the clean-
ing solution that is to be dispersed onto For heavy traffic areas: For carpet, carpeted stairs and uphol-
the surface to be cleaned. Pre-treat with HOOVER PreCleaner* stery:
How to fill Spray. Fill cap to fill line (5 ounces) with HOOVER
If you do not have access to the Carpet/Upholstery Detergent.
Disconnect deep cleaner from PreCleaner Spray, double the amount
electrical outlet. For bare floors:
of HOOVER Detergent (use 2 capfuls
Place deep cleaner handle in the or 10 ounces per 1 gallon tank). Fill cap to fill line (5 ounces) with HOOVER
upright, locked position. Bare Floor Cleaner*
To remove tank, press down on tank Do not use Bare Floor Cleaner on carpet or
upholstery. Do not use any type of wax
handle and pull forward. *Available at additional cost if not with your ‘SteamVac’ ‘Widepath’ deep
included with your model. cleaner.
Continued ➜ 7
NOTE: Use only HOOVER detergents. 2-11 2-12
They are specially formulated for use
with your ‘SteamVac’ deep cleaner.
CAUTION: Detergents contain B
Anionic and Nonionic Surfactants.
Avoid contact with eyes and skin. In
case of contact with eyes, flush with C
cold water for 15 minutes. In case of
contact with skin, wash with water. If
Irritation persists, call a physician.
For Medical Information (U.S.) call D
1-800-752-7869.
Pour detergent into tank. Fill tank to If rubber ring (C) on cap has become
fill line (B) (1 gallon) with hot tap dislodged, reposition it with uneven
water. side against ledge (D) as shown.
To assure proper performance, use only
HOOVER cleaning detergent.
8
under “Fill clean solution tank”, Figs. 2-8 to Do not saturate carpet or upholstery with
3. How to clean 2--14. Wet a white absorbent cloth with the
solution. In a small, hidden area, gently rub
PreCleaner.
If you do not have access to the
the surface with the dampened cloth. Wait PreCleaner Spray, double the amount
Before you begin ten minutes and check for color removal or of HOOVER Detergent (use 2 capfuls
cleaning bleed with white paper towel or cloth. If sur- or 10 oz. per 1 gallon) in the clean
solution tank.
face has more than one color, check all col-
a. Vacuum thoroughly - For carpet,
ors. No cleaning solution removes all stains from
use a HOOVER vacuum cleaner with an
agitator for best results. Vacuum uphol- d. When cleaning entire floor, move all carpets. Stain removal varies with the
stery with a vacuum cleaner with clean- furniture out of area to be cleaned type of spill, time elapsed before removal,
ing tool attachments. Use a crevice tool (may not be necessary if only high traffic carpet material, and carpet type.
to reach into tufts and folds. Do not use areas are to be cleaned). For furniture f. To prevent staining, use plastic or alu-
the ‘SteamVac’ deep cleaner as a dry too heavy to move, place aluminum foil minum foil to protect wood or metal sur-
vacuum cleaner. or wax paper under legs. This will pre- faces from possible water spray.
vent wood finishes from staining carpet. g. To avoid wetting and possible damage
b. For upholstery, check cleaning
Pin up furniture skirts and draperies. to wood floors underneath area rugs/car-
code - Use your HOOVER ‘SteamVac’
‘Widepath’ deep cleaner only if the e. Pretreat spots and heavy traffic pet, either move area rugs/ carpet to a non-
upholstery fabric is marked with a “W” areas with HOOVER ® PreCleaner*- wood bare floor surface or place waterproof
(for “wet” clean) or “S/W” (for Test PreCleaner for colorfastness by first material (e.g. plastic) underneath them
“solvent/dry” or “wet” clean). Do not spraying it on a hidden area; wait ten before cleaning.
clean fabric marked “S” minutes and blot with white paper towels *Available at additional cost if not included
(“solvent/dry” clean only). If your or cloth. with your model.
upholstery does not have a code, seek If no color change is visible, spray
PreCleaner onto spots and traffic areas. See pages 10-13 for instructions on various
professional assistance.
Wait at least ten minutes. Use your cleaning tasks.
c. Test for colorfastness - Mix detergent
‘SteamVac’ ‘Widepath’ deep cleaner to pick
and water according to the instructions
up PreCleaner and spot. Repeat until spot
is removed; carefully scrub with a house-
hold scrub brush if necessary.
8. For heavily soiled areas, repeat steps When picking up spills on bare floors,
5-7. Avoid saturating carpet, as noted Picking up spills use only the floor nozzle with the bare
below. floor attachment (available at additional
Your deep cleaner may also be used to cost if not included with your cleaner) in
Note: To avoid saturating carpet, do pick up small liquid spills (1 gallon or
not use more than 4 wet strokes over place and speed selector in the OFF
less, never to exceed 1/4 inch in position (this will help prevent spreading
one area. Always end with dry depth) on carpet, upholstery, or bare
strokes. the spill).
floors.
It is best to alternate wet and dry If a spot is left, the stair/upholstery nozzle is
1. For best results, pick up spills imme- generally more effective for removing it.
strokes as described above. diately by placing the stair/upholstery
nozzle just above the spill and suction Although no cleaning solution can com-
For best cleaning results and to aid in
up any residue on top of the carpet. pletely remove all spots, they can be treat-
faster drying of carpet, end with more
ed by following the instructions provided by
dry strokes. (Continue using dry strokes 2. If the spill remains, place either the
the manufacturer of the carpet, upholstery,
until little water is visible passing stair/ upholstery nozzle or floor nozzle
or bare floor surface being cleaned.
through the recovery tank lid.) with brushes turned OFF in front of the
Empty recovery tank when the motor spill, pull the nozzle very slowly over the Do not use the deep cleaner to pick up
sound becomes higher pitched and spill initially with suction only. flammable or combustible liquids or
there is a loss in suction (see chemicals.
Repeat with spray and suction.
“Automatic shut-off”, Fig. 2-6) When finished, follow “After cleaning”
When finished cleaning, follow “After instructions on pages 9.
cleaning” instructions on pages 9.
10
Cleaning bare floors 3-5 3-6
A
How to attach bare floor
attachment
(available at additional cost if not TA
BA
RO
TE LOOR
RE
F
O
ON
N
included with your cleaner)
OR
TE
FLO
B
R O TA
BARE
Disconnect deep cleaner from electri-
cal outlet.
To prevent possible leaking, remove
clean solution tank (Fig. 2-8) and recov- TA
BA
RO
TE LOOR
RE
F
O
N
bare floor attachment.
Set tanks aside (do not set tank on furni-
2. With foam strip (A) (located under the 3. Push attachment against nozzle while
ture).
netting) in position as shown, place rotating attachment downward until both
1. With handle in upright position, tilt attachment on front of nozzle (B). ends snap into place.
cleaner back so that handle rests on the Make sure arrow on end of attachment (Note: Some force may be required to
floor. points in the direction as shown. rotate and snap attachment into place.)
12
Cleaning upholstery 3-13 3-14
4-1 4-2
4. Maintenance B
Removable brushes
Your deep cleaner is equipped with
removable brushes for easy cleaning.
A B
To remove brushes
Disconnect cleaner from electrical
outlet.
To prevent possible leaking, remove Press handle release pedal to lower Grasp inner portion of brush (A) and pull
clean solution tank and recovery tank. handle. Turn cleaner over so bottom is brush assembly out slightly to reveal
Set tanks aside. facing up. latches (B).
B D
C
Press both latches (B) and pull brush To replace brushes Press brush firmly to snap into place.
block out. The brushes can be cleaned
Align posts (C) on both ends of brush
under running water.
assembly with slots (D) in cleaner hous-
ing.
Make sure that the square post (E) also
aligns with the square hole (F). Turn
brushes slightly until post fits easily into
hole. 13
Storage Problem: Clean solution won’t
dispense
Before storing: Full Three Year
• Empty solution tank and rinse
thoroughly with clean water. Possible cause Warranty
Possible solution
• Replace empty solution tank and
• Solution tank not firmly in place
(Domestic Use)
turn deep cleaner ON. Squeeze
trigger and push deep cleaner for- • Make sure tank is securely locked in
position Your HOOVER® appliance is warranted
ward and back several times to
in normal household use, in accordance
expel any solution remaining in the • Solution tank empty
with the Owner’s Manual against original
deep cleaner’s system. (Do not use • Refill tank according to instructions for
defects in material and workmanship for
deep cleaner on wood floors.) surface being cleaned
a period of three full years from date of
• Empty recovery tank and rinse • Recovery tank lid not on purchase. This warranty provides, at no
thoroughly with clean water. correctly cost to you, all labor and parts to place
Allow brushes and underside of deep • Make sure lid is firmly in place this appliance in correct operating con-
cleaner to air dry thoroughly before • Pump needs to be “primed” (when dition during the warranted period. This
storing deep cleaner on a carpeted or using tool) warranty applies when the appliance is
wood surface. • See “Before using tool” section, p.12 purchased in the United States including
its territories and possessions, or in
Do not store deep cleaner with a full
solution tank in place.
Problem: Brushes won’t rotate during Canada or from a U. S. Military
floor cleaning Exchange. Appliances purchased else-
where are covered by a limited three
Lubrication Possible cause
Possible solution
year warranty which covers the cost of
parts only. This warranty does not apply
The motor is equipped with bearings
which contain sufficient lubrication for • Dirty filter screen on bottom of unit if the appliance is used in a commercial
the life of the motor. The addition of • Clean screen as shown in Fig. 3-2 or rental application.
lubricant could cause damage. Do not • Speed selector on OFF This warranty only applies when the
add lubricant to motor bearings. • Move speed selector to Low or Hi product is in use in the country or territo-
ry in which it is purchased.