Professional Documents
Culture Documents
Watch hands
A FUNCTIONING
ALARM SET Mode
B
ALARM SET Mode Correction
Minute
NORMAL Mode
Alarm
TIMING Mode
60 seconds
C A of alarm CHRONOGRAPH
minutes
hand ON / OFF counter TIMING
mode
18
WITH ALARM
NORMAL Mode TIMING Mode Alarm 60 minutes
counter > 1 min.
minute
Alarm 24 hours NORMAL Mode
Correction
hour counter
ALARM OFF ALARM ON
B
of alarm ETA G10.791
hours
C A Start TIMING
Push-button C Push-button A
18
18
Setting crown
(Positions I, II, III)
Split/Reset
TIMING Mode Briefly pressing. B
Pressing and holding >2 s.
317 326 - 15.01.2004 / ETA / 01
SETTINGS
C TIMING MODE
Simple timing function ADD function SPLIT-TIME or
D
Crown in position II Crown in position III INTERMEDIATE TIME function
- Reset the hands to zero: - analog time setting: Setting crown in position I
Note 1 Z
Alarm is operating correctly if electronic
18
Reset to zero
time and analog time are identical. 1 to 3 order of functions 1 to Z order of functions 1 to Z order of functions
Note 2 NOTE
Setting crown in position III: Before each timing operation, the chronograph hands must be in their original settings.
STOP SECOND If necessary, refer to the paragraph entitled "SETTINGS - Reset the hands to zero"
MOVEMENT STOP AFTER 8 MINUTES (crown in I and any push-button to resume)