Professional Documents
Culture Documents
FEDERAL GOVERNMENT
6 Ogos 2015
6 August 2015
GAZETTE
P.U. (A) 179
DISIARKAN OLEH/
PUBLISHED BY
JABATAN PEGUAM NEGARA/
ATTORNEY GENERAL’S CHAMBERS
P.U. (A) 179
PADA menjalankan kuasa yang diberikan oleh subseksyen 55(3) Akta Kilang dan
Jentera 1967 [Akta 139], Menteri membuat perintah yang berikut:
Nama
1. Perintah ini bolehlah dinamakan Perintah Kilang dan Jentera
(Pengecualian Perakuan Kelayakan bagi Mesin Angkat) 2015.
Pengecualian
2. Semua mesin angkat yang dinyatakan dalam Jadual dikecualikan daripada
perakuan kelayakan yang dikehendaki di bawah subseksyen 19(1) Akta dan
peraturan 10 Peraturan-Peraturan (Pemberitahu, Perakuan Kelayakan dan
Pemeriksaan) Kilang dan Jentera 1970 [P.U. (A) 43/1970].
Syarat pengecualian
3. Pengecualian di bawah perenggan 2 tertakluk kepada syarat yang berikut:
2
P.U. (A) 179
(c) semua alat ganti mesin angkat hendaklah mematuhi spesifikasi pengilang.
JADUAL
MESIN ANGKAT
1. Rig penggerek
2. Rig gerudi
5. Perata dok
6. Manipulator
7. Menara laluan
8. Penghantar tegak
3
P.U. (A) 179
9. Pengangkat hujung
12. Pengangkat udara atau pneumatik (beban kerja selamat lima ratus
kilogram sahaja)
4
P.U. (A) 179
IN exercise of the powers conferred by subsection 55(3) of the Factories and Machinery
Act 1967 [Act 139], the Minister makes the following order:
Citation
1. This order may be cited as the Factories and Machinery
(Exemption of Certificate of Fitness for Hoisting Machine) Order 2015.
Exemption
2. All hoisting machines specified in the Schedule are exempted from the certificate
of fitness required under subsection 19(1) of the Act and regulation 10 of the
Factories and Machinery (Notification, Certificate of Fitness and Inspection)
Regulations 1970 [P.U. (A) 43/1970].
Condition of exemption
3. The exemption under paragraph 2 is subject to the following conditions:
(a) the occupier of any factory or owner of any hoisting machine shall obtain
the written approval of the Inspector under paragraph 36(1)(a) of the Act
before installing any hoisting machine except a winch (towing vehicle
only) and tail lift;
(i) conduct hazard identification, risk assessment and risk control for
the hoisting machines;
(ii) ensure safe operating procedures for the hoisting machines are
provided as guideline to the employees;
5
P.U. (A) 179
SCHEDULE
HOISTING MACHINES
1. Boring rig
2. Drilling rig
5. Dock leveller
6. Manipulator
7. Gangway tower
6
P.U. (A) 179
8. Vertical conveyor
9. Tail lift