Professional Documents
Culture Documents
B: - (R T) × B - B: B: - (R T) × B - B
B: - (R T) × B - B: B: - (R T) × B - B
W–
201ardASTBardASTOLTe are
sending sample as listed below for
conducting the test
1. M16×40 Bolt-04 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A325)
2. M16×45 Bolt-05 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A325)
3. M22×70 Bolt-03 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A325)
4. M24×70 Bolt-02 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A325)
5. M24×80 Bolt-04 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A325)
6. M24×95 Bolt-03 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A325)
7. M36×900 Anchor Bolt-02 Batch no: 201907-107 (Refer to Standard ASTM A325)
8. M36×1050 Anchor Bolt-03 Batch no: 201907-107 (Refer to Standard ASTM A325)
NUT
9. M16×40 Nut-002 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A563)
10. M16×45 Nut-05 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A563)
11. M22×70 Nut-01 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A563)
12. M24×70 Nut-01 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A563)
13. M24×80 Nut-03 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A563)
14. M24×95 Nut-02 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A563)
15. M36×900 Anchor Nut-01 Batch no: 201907-107 (Refer to Standard ASTM A563)
16. M36×1050 Anchor Nut-01 Batch no: 201907-107 (Refer to Standard ASTM A563)
WASHER
17. M16×40 Washer-02 Pcs, Batch no: 201907-105 (Refer to Standard ASTM F436)
18. M16×45 Washer-05 Pcs, Batch no: 201907-105 (Refer to Standard ASTM F436)
19. M22×70 Washer-01 Pcs, Batch no: 201907-105 (Refer to Standard ASTM F436)
20. M24×70 Washer-01 Pcs, Batch no: 201907-106 (Refer to Standard ASTM F436)
21. M24×80 Washer-03 Pcs, Batch no: 201907-106 (Refer to Standard ASTM F436)
22. M24×95 Washer-02 Pcs, Batch no: 201907-106 (Refer to Standard ASTM F436)
23. M36×900 Washer-01 Batch no: 201907-107 (Refer to Standard ASTM F436)
24. M36×1050 Washer-01 Batch no: 201907-107 (Refer to Standard ASTM F436)
Above listed sample NUT & BOLT for conducting the test as listed below-
1. Chemical Analysis:
(Carbon, Silicon, Manganese, Sulfur, Phosphorus)
2. Tensile Test
Page 1 of 2
3. Hardness Test
4. Coating Thickness Measurement
5. Dimension
Above listed sample WASHER for conducting the test as listed below-
1. Chemical Analysis:
(Carbon, Silicon, Manganese, Sulfur, Phosphorus)
2. Hardness Test
Page 2 of 2