Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
Troubleshooting
C9 Engines for Caterpillar Built Machines
Media Number -RENR5089-31 Publication Date -01/11/2014 Date Updated -06/11/2014
i02445663
Note: A timing calibration is required for a new engine, replacing an ECM that fails to
communicate or following work on the front gear train, the camshaft, or the crankshaft.
System Response:
The check engine lamp will illuminate while this diagnostic code is active. The ECM uses
default timing. Timing may be off as much as three degrees.
• The engine may run rough and/or the engine may emit white smoke in the exhaust.
Test Step 1. Perform the following diagnostic procedure: Engine Speed/Timing Sensor -
Calibrate
Results:
• OK - STOP
Copyright 1993 - 2020 Caterpillar Inc. Tue Aug 11 02:23:58 UTC+0200 2020
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/cmediaheaderin... 11/08/2020