Professional Documents
Culture Documents
REV
CODE
Engineering Services
E1121-150-PS-DS-101437_6 1
B Comment Resolution Sheet (CRS)
SR. NO. PAGE NO./Reference CLIENT COMMENTS COMMENTS RESOLUTION CLIENT COMMENTS COMMENTS RESOLUTION
SHEET 1 OF 1
Project No. E-1121
This document contains confidential and/or proprietary information of LTHE and its affiliated companies. No part of this document,
data, or information, issued for the captioned project or purpose, shall be used for other than the purpose for which this has been
provided or disclosed to others or reproduced in any manner, except with the prior written permission of LTHE.
E1121-150-PS-DS-101437_6_R2 Page 1 of 6
Project Document Title : PROCESS DATASHEET FOR TC
EPCM Services for 100KTPA Chloromethane
COMPRESSOR SUCTION FILTER (FL-AB1501/A,B)
Plant
Doc. No.:E1121-150-PS-DS-101437_6 Rev. 2 04-Oct-19
Yes No NA Note: This approval does not relive the document ORIGINATOR any
of his obligations and responsibilities under this Contract .
E1121-150-PS-DS-101437_6_R2 Page 2 of 6
Project Document Title : PROCESS DATASHEET FOR TC
EPCM Services for 100KTPA Chloromethane
COMPRESSOR SUCTION FILTER (FL-AB1501/A,B)
Plant Doc. No.:E1121-150-PS-DS-101437_6 Rev. 2 04-Oct-19
Revision Record
• Revised text in Blue colour’ identifies changes in the latest revision of document with revision mark (B,C.. etc) in right
most side of the sheet.
• Revision description A, B, C..... etc. identifies document during development stage for review, approval and enquiry;
Revision description 0,1 ,2…..etc. identifies document if issued for information, or after approval if issued for purchase,
construction, commissioning, etc.
E1121-150-PS-DS-101437_6_R2 Page 3 of 6
EPCM Services for 100KTPA Chloromethane Plant Project Document Title : PROCESS DATASHEET FOR TC COMPRESSOR SUCTION FILTER (FL-AB1501/A,B)
WORKING PRESS. 0.15 kg/cm2G GASKET PACKING T/#9007LC Silica Filled PTFE
INTERNAL PARTS
CORROSIVITY NO
MAX. OPERATION - m3
STRESS RELIEVING NO
BUFFING NO
ACID PICKLING NO
HEAT INSULATION NO
INSIDE FINISHING NO
LOCATION OUTDOOR
Notes:
1 Purpose: To remove mainly iron chloride and foreign matters and sulphuric acid mist. 2
2 All exterior carbon steel surfaces are smoothly prepared and coated with the anti-corrosive paints by vendor . 2
3 Deleted 2
5 All nozzles -top, side and bottom shall be of minimum 150 mm length unless otherwise specified.
11 I.D. & TL to TL length of the vessel given is preliminary and it shall be confirmed by vendor. 2
E1121-150-PS-DS-101437_6_R2 Page 4 of 6
EPCM Services for 100KTPA Chloromethane Plant Project Document Title : PROCESS DATASHEET FOR TC COMPRESSOR SUCTION FILTER (FL-AB1501/A,B)
CONSTRUCTION MATERIALS
WORKING CONDITIONS SKETCH
(*)
(*)
Size: ID1200×3450L(F-TL)(*)
E1121-150-PS-DS-101437_6_R2 Page 5 of 6
EPCM Services for 100KTPA Chloromethane Plant Project Document Title : PROCESS DATASHEET FOR TC COMPRESSOR SUCTION FILTER (FL-AB1501/A,B)
CONSTRUCTION MATERIALS
WORKING CONDITIONS SKETCH
E1121-150-PS-DS-101437_6_R2 Page 6 of 6