Professional Documents
Culture Documents
Watertight solutions
that last
1
Introducing
Trelleborg Pipe Seals
Trelleborg Pipe Seals is a leading With our global reach, we deliver continuous innovation, logistics
and a sales network spanning over 50 countries, including the US
supplier of pipe seals and repair and Canada.
solutions for concrete and plastic
We will support you from the beginning of your project right to
pipes, manholes and connectors the very end with the most advanced polymer technology and
used for potable water, sewerage engineering expertise. The high performance of our seals ensure
and drainage. the highest reliability standards.
Whether you need an entirely new system or improvements to your
As part of the Trelleborg Group, existing one, you can choose from a range of market-leading seals
and pipe repair solutions that offer:
we benefit from over 100 years of
experience in engineered polymer ■ High quality
solutions that seal, damp and
■ Quick and easy installation
protect critical applications
in demanding circumstances. ■ Watertight solutions that last
2 3
Advantages of Tested and
our materials approved
SBR
Styrene Butadiene Rubber (SBR) has good abrasion resistance and aging stability when PULSATION TESTS PROVE IT:
protected by additives. About 50 % of car tires are made from various types of SBR. 100 % WATERTIGHT
Trelleborg introduced the use of SBR in pipe sealing applications, fully utilizing its unique When pressure within a pipeline changes from
processing and material performance. positive to negative and sand or other dirt is
Our specially developed SBR is similar to natural rubber, offering good resilience, strength present, there is a risk of leakage. To ascertain
and abrasion resistance. We have improved its performance at low temperatures, removing the resistance of its sealing systems to the
the risk of microbiological deterioration. Trelleborg’s SBR is specially compounded to be penetration of sand as a result of these pressure
weather and ozone resistance. This makes it a good choice for integrated seals. changes, Trelleborg Pipe Seals has developed a
special “pulsation test”.
A rubber bladder containing water and sand is
TPE
Since their introduction, Thermoplastic Elastomers (TPE) have provided a new dimension EXTERNAL TESTING
to a multitude of engineered applications.
Following Trelleborg’s extensive Research & Development process and after passing internal tests,
Trelleborg has pioneered the use of TPE in pipe sealing applications, fully utilizing its our seals are tested by third party agencies, like the National Sanitation Foundation (NSF), Canadian
unique processing and material performance. The specially developed low friction Standards Association (CSA), Underwriters Laboratories (UL) and Certificadora Mexicana de Productos y
compound optimizes jointing performance, gives excellent service life and is oil resistant. Procesos Ecológicos (CERTIMEX). Additionally, we follow procedures from the American Society for Testing
TPE is ideal for sewer applications as it is extremely resistant to contamination found in and Materials (ASTM), American Water Works Association (AWWA), FM Global (FM) and the International
waste water. It also offers environmental advantages as the thermal bonds are reversible, Organization for Standardization (ISO).
offering improved recycling opportunities. All our seals are fully approved, meeting or exceeding local industry standards.
4 5
Potable Water
Contents Application
Introducing Trelleborg Pipe Seals 02
Advantages of our materials 04
Tested and approved 05
F-552 Anger-Lock IPS
Potable Water Application
F-552 Anger-Lock IPS
F-584 Anger-Lock C-909
08
08 F-584 Anger-Lock C-909
F-603 Power-Lock IPS 12
F-560 Rieber IPS
F-565 Rieber C-900
12
12
F-603 Power-Lock IPS
Sewer Application
F-569 Rieber Sewer 20 F-560 Rieber IPS
Irrigation Application
F-607 PIP-Lock 24 F-565 Rieber C-900
F-592 Rieber PIP 24
6 7
Introducing the
KEY FEATURES AND BENEFITS
■ Cannot be displaced or lost during stocking, transportation and installation
F-552 Anger-Lock IPS ■ Easy pipe installation due to low jointing force
Seal
The F-552 Anger-Lock IPS and ONE-PIECE SEAL
the F-584 Anger-Lock have been
installation
specifically designed for PVC The F-552 Anger-Lock IPS and the F-584 Anger-Lock seals have a
and PVC-O pipes and fittings. unique design in which the rubber sealing element and the reinforcing
plastic are bonded together to make a one-piece seal. The soft
Both systems meet or exceed plastic reinforcement allows the seals to be fitted easily into the pipe
ASTM and AWWA pipe sealing socket, either by manually bending the seal into the groove or by using The F-552 and F-584 can be fitted into the pipe automatically using commercially available
requirements for potable water automatic insertion equipment. ring insertion machines. The seal can also be inserted by hand:
and can also be used for waste
water applications.
LOW ASSEMBLY FORCE
The unique lip design reduces the assembly force required. Even
larger diameter pipes can be jointed without the need for special
assembly tools or equipment. Pipes and fittings can be jointed easily Locate the bending zone of the seal
and quickly, reducing time and cost.
Making the seal an integral part of the pipe eliminates many dis Bend the seal into a heart shape
advantages of separate sealing rings. The seal is positioned in the
socket and the unique design eliminates potential ring displacement
during transportation and pipe assembly.
16 1.39 1.99
18 1.531 2.079
B MATERIAL 15o
EPDM rubber – Hardness 60 ± 5 Shore A By compressing the sealing element, the EPDM
rubber will deform and create pressure on both
Reinforced retaining ring
A spigot and socket. This results in a watertight
Ozone resitant seal.
10 11
Introducing the Manufacturing
F-603 Power-Lock IPS process
F-560 Rieber IPS
F-565 Rieber C-900
Fully integrated sealing systems for pressure pipes and fittings he pipe is heated to allow forming
T
of the socket
True to our engineering expertise, THE HIGHEST STANDARD OF JOINT SECURITY
Trelleborg is applying the same
ground-breaking technology to During the manufacturing process, the mandrel and seal are used as
different pipe systems for potable a tool to form the pipe socket. The seal becomes part of the socket,
water pipes. effectively shaping its own seal groove. This reduces irregularities in
the socket and provides a watertight seal.
The F-603 and F-560 seals are he seal is automatically loaded on the
T
meant for IPS pressure pipes Time consuming measurement of pipe sockets and separate socketing mandrel against the support
and the F-565 for AWWA C-900 installation procedures are no longer necessary. At production, the flange
pressure pipes. number of extrusion lines that can be supervised by each operator is
greater. This results in productivity increases for both pipe producer
and pipe installer.
12 0,869 1,854
B
14 0,944 2,020
16 1,060 2,269
18 1,142 2,444 A
20 1,210 2,696
24 1,418 3,034
14 15
F-565 Rieber C-900
SIZE CHART
PIPE SIZE A B
B
(inch) (inch) (inch)
4 0,512 1,099
A
6 0,591 1,264
8 0,669 1,433
10 0,788 1,689
12 0,869 1,854
14 0,944 2,02
16 1,06 2,269
18 1,142 2,444
20 1,26 2,696
24 1,418 3,034
30 1,575 3,37
36 1,575 3,37
42 2,047 4,381
48 2,047 4,381
16 17
Sewer
Application
F-569 Rieber Sewer
18 19
Introducing the
F-569 Rieber Sewer
Fully integrated sealing system for plastic pipes for wastewater applications SIZE CHART
B
PIPE SIZE A B
The F-569 Rieber Sewer seal THE HIGHEST STANDARD OF JOINT SECURYTY (Inch) (Inch) (Inch)
meets or exceeds current
During the manufacturing process, the mandrel and seal are used as 4 0.378 0.724
ASTM pipe sealing requirements
and incorporates the traditional a tool to form the pipe socket. The seal becomes part of the socket, 5 0.402 0.770 A
Rieber seal design. effectively shaping its own seal groove. This reduces irregularities in
6 0.425 0.815
the socket and provides a watertight seal.
8 0.472 0.906
Time consuming measurement of pipe sockets and separate installa-
tion procedures are no longer necessary. At production, the number 10 0.58 1.087
of extrusion lines that can be supervised by each operator is greater. 12 0.614 1.177
This results in productivity increases for both pipe producer and pipe B
15 0.616 1.358
installer.
18 0.712 1.539
21 0.786 1.720 A
24 0.863 1.902
27 0.945 2.083
20 21
Irrigation
Application
F-592 Rieber PIP
F-607 PIP-Lock
22 23
Introducing the
KEY FEATURES AND BENEFITS
■ Cannot be displaced or lost during stocking, transportation and installation
F-607 PIP Lock ■ Greater joint reliability due to joint tolerance reduction
The F-607 PIP-Lock has been THE HIGHEST STANDARD OF JOINT SECURITY
designed for indoor, irrigation
and wastewater applications. During the manufacturing process, the mandrel and seal are used as
a tool to form the pipe socket. The seal becomes part of the socket,
The F-592 fits irrigation pipes effectively shaping its own seal groove. This reduces irregularities in
that use belling systems for the socket and provides a watertight seal.
Rieber style seals.
Time consuming measurement of pipe sockets and separate installa-
Both systems meet current
tion procedures are no longer necessary. At production, the number
ASTM pipe seal requirements.
of extrusion lines that can be supervised by each operator is greater.
This results in productivity increases for both pipe producer and pipe
installer.
24 25
F-607 PIP Lock F-592 Rieber PIP
SIZE CHART SIZE CHART
B B
PIPE SIZE A B PIPE SIZE A B
(inch) (inch) (inch) (inch) (inch) (inch)
18 0.712 1.539
21 0.786 1.72 A
24 0.863 1.902
27 0.945 2.083
MATERIAL MATERIAL
TPE SBR rubber – Hardness 55± 5 Shore A
Reinforced retaining ring Metal reinforcement
Oil and ozone resistant Available in EPDM, Nitrile or other elastomeric
material by special order
26 27
Version US 1.1_2018
Trelleborg is a world leader in engineered polymer solutions
that seal, damp and protect critical applications in demanding
environments. Our innovative engineered solutions accelerate
performance for customers in a sustainable way. The Trelleborg
Group has local presence in over 50 countries around the world.
facebook.com/pages/Trelleborg-Pipe-Seals-Duisburg
twitter.com/PipeSeals
youtube.com/c/TrelleborgPipeSeals
www.linkedin.com/company/trelleborg-pipe-seals
Trelleborg Pipe Seals, Carlos Salinas #1 | Infonavit Presidentes, Tijuana, BC 22215 MX, Tel. +1 305 433 2205 (US), +52 664 625 4885 (MX)
Trelleborg Pipe Seals Milford Inc, 250 Elm Street Milford, New Hampshire 03055, USA, Tel: +1 603 673 8680, +1 800 626 2180, Fax: +1 603 673 7271