Professional Documents
Culture Documents
I. MELC : (Select and use farm tools: Check farm tools for faults)
II. Objectives:
K: Identify defective farm tools
S: Follow the basic rules when using farm tools
A: Appreciate the importance of following the guidelines when using farm tools
IV. Procedures:
A. Readings:
Farm implements like ordinary plow and wooden harrow should be checked thoroughly before use.
Loosened bolts and nuts should be tightened firmly. Disc plow and harrow should also be lubricated on their
moving parts like bearings. Tractors should be tuned-up very well by skilled operator. Check on their oil, lubricant,
fuel and cooling system. Tools that are worn out should be separated and be fixed immediately to avoid accident
ALWAYS WEAR EYE PROTECTION. Use tools that are the RIGHT SIZE & RIGHT TYPE for
Follow the correct procedure for using EVERY tool. your job.
DON’T work with OILY or GREASY hands Keep your cutting tools SHARP and in good condition
Handle SHARP-EDGED and POINTED TOOLS with Always carry pointed tools by your side with the points and
care heavy ends DOWN
SECURE all small work & short work with a vise or NEVER carry tools in your pockets.
clamp. KEEP your punches & chisels in good condition.
DON’T use tools which are LOOSE or CRACKED. Mushroomed heads can chip & cause injuries.
DON’T use a file without a HANDLE. DON’T pry or hammer with a FILE. It may shatter.
DON’T use screwdrivers as chisels or pry bars. DON’T try to increase your leverage by using a “cheater”
AFTER USING A TOOL — clean it and return it to its with a wrench. Wrenches are designed at the right strength
proper storage place. for their size and length.
Use the RIGHT TYPE of tool for the job. If anything breaks or malfunctions — report it to your
Don’t use tools for things they weren’t meant for supervisor AT ONCE.
Cut away from yourself when you use chisels and NEVER place tools and materials where they hang on the
other edged tools edge of a bench.
DON’T FORCE screws; make sure that the correct Store tools and materials vertically, with the points and
screw for the job is being used. heavy end down.
B. Exercises for skill subjects/analysis questions using HOTS for content subjects.
Exercise 1
Directions: Observe the pictures carefully and tell whether these tools are defective or not.
E Y S A F T
1. What is the connection of the word to the picture? Explain your answer.
2. What should the farmer do to prevent farm accidents?
3. Why is it important to follow safety guidelines when using the farm tool?
C. Assessment/Application:
Exercise 1
Exercise 2
1. What is the connection of the word to the picture? Explain your answer.
Possible answer: We need to think of our safety first before handling any farm tools to avoid any
kind of injuries and accidents.
2. What should the farmer do to prevent farm accidents?
Possible answer: Check the farm tools first before and after using and follow the safety guidelines.
3. Why is it important to follow safety guidelines when using the farm tool?
Possible answer: To make our work faster because using defective tools might delay our work and
to avoid any injuries and mishaps.
Assessment