Professional Documents
Culture Documents
1 PACKAGE NO.
2 LINK ROUTE NO.
3 From Construction of RCC Bridge over Sursar river at Mahaddipur bazar to Chhatapur road in Supaul dist.
4 TO
6 BLOCK Kishanpur
7 DISTRICT Supaul
8 TOTAL LENGTH OF IMPROVEMENT 138.72
9 LENGTH OF BRIDGE (M) 38.72
10 LENGTH OF APPROACH ROAD (M) 100.00
11 SPAN ARRANGEMENT 2 X 18.75 m
12 NO OF SPAN 2
13 DIST. BETWEEN CEN. TO CEN. OF BEARING 18.75
RWD (w) Division,Supaul
State:- Bihar
Page 187
PRADHAN MANTRI GRAM SADAK YOJNA (PMGSY)
( Rural Works Department, Govt. of Bihar)
BILL OF QUANTITY
NAME O
Construction of RCC Bridge over Sursar river at Mahaddipur bazar to Chhatapur road in Supaul dist.
BLOCKKishanpur
DISTRI Supaul
Sl. Amount
Item Description Unit Quantity Rate
No. (in Rs.)
FOUNDATION
1 Excavation for Structures
Earthwork in excavation for structures as per drawing
and technical specifications Clause 305.1 including
setting out, construction of shoring and bracing, removal
of stumps and other deleterious material and disposal
upto a lead of 50 m, dressing of sides and bottom and
backfilling in trenches with excavated suitable material.
I. Ordinary Soil
i) Upto 3m depth Cum 408.270 256.68 104793.92
ii) 3m to 6m depth Cum 0.000 304.81 0.00
2 Providing and laying of PCC M15 levelling course
100mm thick below the pile cap.
II. PCC Grade M-15 (Levelling Course for Pile Cap) Cum 21.870 6,333.53 138514.27
3 R.C.C. grade M 30 in Pile Foundation complete as per
Dwg & Tech Specification.
span - 2 X 18.75 m
STATE :- BIHAR
DISTRICT :-Supaul
BLOCK :-Kishanpur
Name of Scheme Construction of RCC Bridge over Sursar river at Mahaddipur bazar to Chhatapur
road in Supaul dist.
District Supaul
Block Kishanpur
3 Height of Bridge from Existing Road Level (FRL- 105.230 m.- ERL - 100.610) - 4.620 m
5 H.F.L. 102.250 m
Waterway-
6 Water way & Full Length of Deck Slab of
Bridge
Length Deck Slab-
Aboutment-
7 Pile Depth/ Depth of Well
Pier-
8 No. Of Sapn 2 X 18.75 m
10 Whether Deck Slab Design as per IRC YES (IRC:6,5 & 21)
( )
Executive Engineer)
RWD (w), Division, Imamganj
ENT
T
ul
pur
4.620 m
102.250 m
102.00 m
38.72 m
14.00 m
14.00 m
2 X 18.75 m
230.056 Lacs
4.705 Lacs
4.172 Lacs
NIL
Executive Engineer)
D (w), Division, Imamganj
PRADHAN MANTRI GRAM SADAK YOJNA (PMGSY)
SUMMARY OF COST ESTIMATE FOR THE PROJECT
DISTRICT : Supaul
BLOCK : Kishanpur
S.E.
RWD (w) Division,Supaul
Page 193
PRADHAN MANTRI GRAM SADAK YOJNA (PMGSY)
SUMMARY OF COST ESTIMATE FOR THE PROJECT
DISTRICT : Supaul
BLOCK : Kishanpur
Page 194
PRADHAN MANTRI GRAM SADAK YOJNA (PMGSY)
PACKAGE SUMMARY
NAME OF ROAD : Construction of RCC Bridge over Sursar river at Mahaddipur bazar to Chhatapur road in Supaul dist.
DISTRICT Supaul
BLOCK Kishanpur
Link Length of Average Cost Total Estimated Cost of Bridge Average cost per Mt. of Bridge
Name of Length of Cost of Bridge
Sl. No. Route Name of Road Approach per Mt. of including Approach Road with Approach Road
Block Bridge (Structure Only)
No. Road Bridge (Rs. in Lakhs) (Rs. in Lakhs)
Page 196
PROFORMA-C
2 Package No : 0
3 Name of Road : Construction of RCC Bridge over Sursar river at Mahaddipur bazar to Chhatapur road in Supaul dis
5 Name of the Proposed Bridge (if any) : Bammadhar at CH. 13.25 K.M
Total
(i) If Yes, please mention the Phase, MoRD Sanction letter No and Date of Sanction :
Phase : MoRD Sanction No. : Date :
Whether any CD/ Causeway was Sanctioned at or nearby location with the road proposal and whether the
(iii)
same was constructed or not (if yes, the details thereof with chainage) :
(iv) Whether the roadwork has been completed or in progress and likely date of completion :
(v) If not, How the connectivity and movement of traffic was ensured :
(v) Reasons for not proposing the Bridge at the time of Submission of Road proposal :
PROFORMA-C
Total Cost
10 Estimated Cost ITEM Cost per Mt
(Rs. in Lakhs)
12 Whether the Bridge has Geometrics as per latest Circular of NRRDA : YES/ NO
13 Whether the Cost Estimates are as per standard data analysis an SSR
Name of Road :
Is the proposed work is for CD/ Causeway of any length or bridge with span excluding approaches
15 YES/ NO
less than 15m.
STAs need not clear such proposals
c. Whether type of foundation & resting strata as per survey report justified to be safe YES/ NO
d. Whether Hydraulic design is checked & found to be adequate as per site requirements YES/ NO
e. Whether RCC designs are checked and found to be economical & safe. YES/ NO
f. Whether the provisions made by PIU are sufficient & essentia from economy point of view. YES/ NO
17 If the Proposal is for a Bridge for which Road was already Sanctioned
If Yes, Have you verified and satisfied yourself with all the items listed ar Sr. No. 7, by PIU Yes / No
Have you satisfied yourself that the road is a part of Core Network Yes / No
18 Are you Satisfied with the following
Engineering Surveys (L-section, X-sections must be verified) Yes / No
Soil/ Material Investigation Yes / No
Hydraulic Studies Yes / No
(Catchment for structures to be verified from topo sheet. Location and requirement of structures to be
verified from L-section and catchment area to be marked on Topo Sheet Copy)
19 Is the design of the following elements as per relevant IS/ IRC codes
Foundation / Abutments / Piers / Deck Slab / Wing Walls Yes / No
Does the Estimation Conform to Standard Rate Analysis and SoR generated for current
20 Yes / No
Phase for PMGSY works and a copy of SoR provided to STA
22 Whether STA and Superintendent Engineer have visited the site? If Yes, Date of Visit :
Kindly indicate whether the program of visit was informed to NRRDA for prior approval?
24 Certificates :
Certified that the proposal of bridge is checked & found to be it is missing bridge on sanctioned road & in the same
stretch as it was sanctioned in previous phase under PMGSY.
Certified that the Design and Estimation for the Poroposed bridge are based on the latest Circular of NRRDA: vide
DO.letter #P-17035/1/2007-Tech. 30th September, 2010.
Certified that the Design and Estimation for the Poroposed bridge are based on the data and SSR provided by PIU
Engineers. The proposal after final Correction is entered on the OMMS. The Proposal may be considered for
clearance.
I. Ordinary Soil
i) Upto 3m depth Cum 408.270 256.68 104793.92
ii) 3m to 6m depth Cum 0.000 304.81 0.00
iii) Above 6m depth Cum
2 12.39 800 & Providing and laying of PCC M15 levelling course
(MoRT 1200 100mm thick below the pile cap.
&H) II. PCC Grade M-15 (Levelling Course for Pile Cap) Cum 21.870 6,333.53 138514.27
3 12.8 1500, R.C.C. grade M 30 in Pile Foundation complete as per
(G) 1700 & Dwg & Tech Specification.
(MoRT 2100
&H)
Pile Cap in RCC M-30 Cum 239.610 7,689.12 1842389.69
4 12.24 1100, Bored cast-in-situ M35 grade R.C.C. Pile excluding
(MoRT 1600 & Reinforcement complete as per Drawing and Technical
&H) 1700 Specifications and removal of excavated earth with all
lifts and lead upto 1000 m.
I. 1000 mm Dia m 16652.21 0.00
II. 1200 mm Dia m 360.000 17175.40 6183143.80
5 11.7 1000 & Supplying, fitting and placing HYSD bar reinforcement
1200 in foundation complete as per drawings and technical
specifications Clauses 1000 and 1202
MT 54.560 72,725.85 3967922.11
6 12.22 Providing steel liner 10 mm thick for curbs and 6mm
(MoRT 1200 thick for steining of wells including fabricating and
&H) &1900 setting out as per detailed drawing
MT 0.000 162,611.43 0.00
Providing and Constructing Temporary Earth Island
12.9 A
(Assuming depth of water 1.0 m and height of island to
7 (MoRT 1200
be 1.25 m including Royality for earth @ Rs. 5526.00 for
&H)
each Island.) No. 1.000 36,376.32 36376.32
8 Carrying out load test on any pile as per standard
procedure laid down in the IS:2911 specification
including construction of test cap, dismantling the cap
after test and cleaning the site and maintaining
complete records of load
a) Initial Load Test on test pile for 2.5 times the design
load specified in Drawings
Cumulative Cumulative
Cut Area Fill Area Cut Volm Fill Volm
Chainage Cut Volume Fill Volume
(sq.m) (sq.m) (Cu.m) (Cu.m)
(Cu.m) (Cu.m)
(m) (m2) (m2) (m3) (m3) (m3) (m3)
0+000.0000 0.000 0 0.000 0.000 0.000 0.000
0+010.0000 0.000 4.71 0.000 23.550 0.000 23.550
0+020.0000 0.000 11.475 0.000 80.925 0.000 104.475
0+030.0000 0.000 19.335 0.000 154.050 0.000 258.525
0+040.0000 0.000 28.185 0.000 237.600 0.000 496.125
0+050.0000 0.000 25.425 0.000 268.050 0.000 764.175
0+060.0000 0.000 22.725 0.000 240.750 0.000 1004.925
0+070.0000 0.000 33.345 0.000 280.350 0.000 1285.275
0+080.0000 0.000 56.01 0.000 446.775 0.000 1732.050
0+090.0000 0.000 82.05 0.000 690.300 0.000 2422.350
0+100.0000 0.000 93.645 0.000 878.475 0.000 3300.825
0+110.0000 0.000 86.955 0.000 903.000 0.000 4203.825
0+120.0000
0+130.0000
0+140.0000
0+150.0000
0+160.0000 BRIDGE PORTION
0+170.0000
0+180.0000
0+190.0000
0+200.0000
0+210.0000 0.000 114 0.000 1004.775 0.000 5208.600
0+220.0000 0.000 108.03 0.000 1110.150 0.000 6318.750
0+230.0000 0.000 98.355 0.000 1031.925 0.000 7350.675
0+240.0000 0.000 79.155 0.000 887.550 0.000 8238.225
0+250.0000 0.000 60.87 0.000 700.125 0.000 8938.350
0+260.0000 0.000 50.115 0.000 554.925 0.000 9493.275
0+270.0000 0.000 46.83 0.000 484.725 0.000 9978.000
0+280.0000 0.000 42.015 0.000 444.225 0.000 10422.225
0+290.0000 0.000 32.01 0.000 370.125 0.000 10792.350
0+300.0000 0.000 23.34 0.000 276.750 0.000 11069.100
0+310.0000 0.000 16.05 0.000 196.950 0.000 11266.050
Cumulative Cumulative
Cut Area Fill Area Cut Volm Fill Volm
Chainage Cut Volume Fill Volume
(sq.m) (sq.m) (Cu.m) (Cu.m)
(Cu.m) (Cu.m)
(m) (m2) (m2) (m3) (m3) (m3) (m3)
0+320.0000 0.000 10.08 0.000 130.650 0.000 11396.700
0+330.0000 0.000 4.995 0.000 75.375 0.000 11472.075
0+340.0000 0.000 1.56 0.000 32.775 0.000 11504.850
0+343.0086 0.000 0 0.000 7.800 0.000 11512.650
Total Qty. = 11512.65
PRADHAN MANTRI GRAM SADAK YOJNA (PMGSY)
( Rural Works Department, Govt. of Bihar)
Construction of RCC Bridge over Sursar river at Mahaddipur bazar to Chhatapur
NAME OF ROAD : LENGTH OF BRIDGE (M) 38.72
road in Supaul dist.
BLOCK Kishanpur LENGTH OF APPROACH ROAD (M) 100.00
DISTRICT Supaul
Sl. No. SDB MORD Amount
SL .NO Ref.No Item Description Unit Length Width Height Quantity Rate
(in Rs.)
Cost of Haulage Excluding Loading & Unloading as per SOR * Subjected to Verification of Lead
` Per Ton. Km by ` Per Ton. Km by
Type of Road Tipper Truck
For Surface Road 7.90 6.85
Unsurface Gravel Road 9.50 8.24
Kachha Road 19.10 16.57 Page 212
Analysis for Carrige Through Railway from Quarry Site to Work Site
Pakur to Kishanganj Rail Yard
8.00
UnSurface x 8.90 x 1.00 Km = Rs 15.51
4.59
i) Loading Cost from Railway Yard to Railway Wegon = For 5 MT @ 1.25 Nos Labour = Rs 247.00 = Rs 308.75
iii) Railway freight charge from Pakur Railway station to = For 1 MT 213.00 Km = Rs 356.90 = Rs 356.90
Kishanganj Rail Yard Railway station
Busy Seasion charge 12% of Railway freight charge = For 1 MT = 12% = Rs 42.83
Gross Cost for Railway freight charge For 5 MT = "B" + "C" + "D" = Rs 3338.15
Gross Rate for Railway freight Charge = For 1 Cum "E" = Rs 1309.08
Carriage Cost from Quarry to Kishanganj Rail Yard = For 1 Cum = " A" + "E" = Rs 1517.96
Railway Yard
Page 213
Analysis for Carrige Through Railway from Quarry Site to Work Site
Pakur to Kishanganj Rail Yard
8.00
UnSurface x 8.90 x 1.00 Km = Rs 14.27
4.99
i) Loading Cost from Railway Yard to Railway Wegon = For 5 MT @ 1.25 Nos Labour = Rs 247.00 = Rs 308.75
iii) Railway freight charge from Pakur Railway station to = For 1 MT 213.00 Km = Rs 356.90 = Rs 356.90
Kishanganj Rail Yard Railway station
Busy Seasion charge 12% of Railway freight charge = For 1 MT = 12% = Rs 42.83
Gross Cost for railway freight charge For 5 MT "B" + "C" + "D" = Rs 3338.15
Gross Rate for Railway freight Charge = For 1 Cum "E" = Rs 1204.14
Carriage Cost from Quarry to Kishanganj Rail Yard = For 1 Cum "A" + "E" = Rs 1422.24
Railway Yard
Page 215
Summary of Carriage Cost
Amount
Sl. No. Materials Unit
(Rs.)
1 GSB Cum 2002.30
Final Rate
Sl. No. Description Unit Basic Rate GST
Including GST
M-002 Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm cum 433.34 5% 455.01
M-003 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5 mm cum 383.71 5% 402.90
M-004 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm cum 101.67 5% 106.75
M-005 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6 mm cum 433.34 5% 455.01
M-007 Aggregate - For 53 mm Maximum size - Below 5.6 mm cum 101.67 5% 106.75
M-010 Aggregate - Grading I (40 mm nominal Size) 37.25 mm - 25 mm cum 383.71 5% 402.90
M-011 Aggregate - Grading I (40 mm nominal Size) 5 mm and below cum 101.67 5% 106.75
M-014 Aggregate - Grading II (19 mm nominal Size) 5 mm and below cum 101.67 5% 106.75
M-018 Aggregate- Crushable type such as moorum or Gravel for Grading I cum 77.21 5% 81.07
M-019 Aggregate- Crushable type such as moorum or Gravel for Grading II cum 77.21 5% 81.07
M-020 Aggregate- Crushable type such as moorum or Gravel for Grading III cum 77.21 5% 81.07
M-024 Aggregates 22.4 mm to 2.36 mm for wet mix macadam cum 383.71 5% 402.90
M-025 Aggregates 45 mm to 22.4 mm for wet mix macadam cum 493.39 5% 518.06
Final Rate
Sl. No. Description Unit Basic Rate GST
Including GST
M-029 Bitumen (Natural Rubber Modified)Page 221 tonne 32367.5 18% 38193.65
M-035 Bond stone (400 mm x 150 mm x 150 mm) No. 10.61 5% 11.14
M-037 Cement (Excluding Empty Cement Bag Cost 2.38) t 4859 28% 6219.52
M-039 Compensation for earth taken from private land cum 1.71 1.71
M-041 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron cum 67.66 5% 71.04
M-043 Crushed Stone chipping 13.2 mm nominal size cum 549.26 5% 576.72
M-046 Crushed Stone chipping 9.5 mm nominal size cum 495.97 5% 520.77
Final Rate
Sl. No. Description Unit Basic Rate GST
Including GST
M-079 Stone Boulder of size 150 mm and below cum 206.33 5% 216.65
M-081 Stone Screening - Type B 11.2 mm for Grading-2 cum 248.5 5% 260.93
M-082 Stone Screening - Type B 11.2 mm for Grading-3 cum 248.5 5% 260.93
Final Rate
Sl. No. Description Unit Basic Rate GST
Including GST
M-085 Well graded Granular Base Material - Grading A 2.36 mm below cum 86.98 5% 91.33
M-086 Well graded Granular Base Material - Grading A 26.5 mm to 4.75 mm cum 404.62 5% 424.85
M-088 Well graded Granular Base Material - Grading B 2.36 mm below cum 86.98 5% 91.33
M-089 Well graded Granular Base Material - Grading B 26.5 mm to 4.75 mm cum 404.62 5% 424.85
M-090 Well graded Granular Base Material - Grading C 2.36 mm below cum 86.98 5% 91.33
M-091 Well graded Granular Base Material - Grading C 9.5 mm to 4.75 mm cum 434.15 5% 455.86
M-092 Well Graded Material for Sub-Base - Grading I 2.36 mm below cum 86.98 5% 91.33
M-093 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm cum 472.08 5% 495.68
M-094 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm cum 365.72 5% 384.01
M-095 Well Graded Material for Sub-Base - Grading II 2.36 mm below cum 86.98 5% 91.33
M-096 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm cum 456.33 5% 479.15
M-097 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm cum 365.72 5% 384.01
M-098 Well Graded Material for Sub-Base - Grading III 2.36 mm below cum 86.98 5% 91.33
M-099 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm cum 154.77 5% 162.51
M-100 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm cum 487.25 5% 511.61
M-159 Sand Bag (Cost of sand & Empty Cement Bag) Each
Sr. No.
Machine Activity Unit Output Unit Rate
Supplying
PM-001 Air Compressor 210 cfm cfm 210.00 per hour 457.00
compressed air
BM, DBM, SDBC,
PM-002 Batch mix HMP 40-60 TPH t/h 50.00 per hour 23,182.00
PM
BM, DBM, SDBC,
PM-003 Batch type HMP 30/40 TPH t/h 35.00 per hour 2,860.00
PM
PM-004 Bitumen boiler oil fired
200 Heating of litre / h 400.00 per hour 283.00
litre bitumen
1000
litre / h 2000.00 per hour 283.00
litre
Applying bitumen
PM-005 Bitumen emulsion pressure distributor sqm/h 1750.00 per hour 1,531.00
tack coat
Mixing of
PM-006 Concrete mixer 0.28/0.4 cum cum/h 2.50 per hour 80.00
ingradients
PM-012 Hydraulic broom with tractor Surface cleaning sqm/h 1250.00 551.00
PM-013 Hydraulic Excavator 0.9 cum Excavation cum/h 100.00 per hour 1,858.00
PM-014 Hydraulic self propelled chip spreader Surface Dressing cum/h 1500.00 per hour 3,762.00
Pavement
PM-015 Jack Hammer with tractor breaking & rock cum/h 05. to 1 per hour 1,217.00
drilling
PM-016 Joint Cutting Machine with 2-3 blades Cutting of Joints h 05. to 1 per hour 332.00
Mixing of
PM-017 Mixall 6-10 t capacity bituminous t/h 8.00 per hour 1,547.50
materials
Sr. No.
Machine Activity Unit Output Unit Rate
PM-022 Plate vibrator Page 196 Compaction cum/h per hour 443.00
Sub-base G-II/G-
cum/h 8.00 777.00
III
per hour
BM 50/75 mm cum/h 12.00 777.00
Surface Dressing
sqm/h 400.00 777.00
1st Coat
Surface Dressing
sqm/h 500.00 777.00
2ndCoat
Surface Dressing
sqm/h 500.00 777.00
2ndCoat
PM-027 Tipper 5.5 cum/10 t Carriage cum/trip 5.50 per hour 1,015.00
Pulverisation of
PM-028 Tractor with Disc Harrows cum/h 80.00 per hour 518.00
soil
Ripping
PM-029 Tractor with ripper @ 60 cum per hour Pavements, cum/h 60.00 per hour 558.00
uprooting trees
Tractor with trolley/with Grading Transportation of
PM-030 t/trip 3 to 5 per hour 518.00
equipment materials
PM-031 Tractor with Rotavator Scarifier cum/h 25.00 per hour 541.00
Compaction of soil
PM-033 cum/h 100.00 2,029.00
WMM
Vibratory roller 80-100 kN per hour
Compaction of BM cum/h 60.00 2,029.00
PM-035 Wet mix plant (Pug Mill) Wet Mix cum/h 25.00 per hour 1,643.00
Sr. No.
Machine Activity Unit Output Unit Rate
Page 226
CARRIAGE CALCULATION CHART
CARRIAGE OF MATERIALS BY TRUCK OF 5.5 CUM OR 8t CAPACITY INCLUDING OVER HEAD CHARGES & C.P.
Remarks
Truck Track Track
S.No Name of Materials Source Unit factor for (Payble For For For For by Rail Head [(Hs*Ls) +
Capacity Quantity) Surface Graveled Surface Graveled
void & & & (Hg*Lg) +
Per Trip Per Trip Road Road Road Road
Stacking Track in Track in (Hk*Lk)]} +
per cum River River Loading &
Bed Bed Unloading
Nc Hs Hg Hk Ls Lg Lk Rc
1 Stone metal above 50mm MIRZACHAUKI m 3
5.4 0.85 4.59 188.01 6.85 8.24 16.57 80 0 0 1517.96 2660.60
2 Boulder MIRZACHAUKI m 3
5.0 0.8 4.00 188.01 6.85 8.24 16.57 80 0 0 1858.56 3142.01
3 Stone chips / Stone Agg. Below 50mm MIRZACHAUKI m3 5.4 0.924 4.99 188.01 6.85 8.24 16.57 80 0 0 1422.24 2488.43
JAGDISHPUR,
4 Coarse Sand m3 5.4 0.924 4.99 101.96 6.85 8.24 16.57 255 0 0 0 2901.16
BGP
5 Local sand m3 5.4 0.924 4.99 101.96 6.85 8.24 16.57 2 0 1 0 150.48
6 Cement SAHARSA mt 8 1 8 409.45 6.85 8.24 16.57 65 0 0 0 854.47
7 Steel SAHARSA mt 8 1 8 325.46 6.85 8.24 16.57 65 0 0 0 770.48
8 Bitumen BARAUNI mt 8 1 8 329.10 6.85 8.24 16.57 205 0 0 0 1732.64
9 Emulsion PAHARPUR mt 8 1 8 329.10 6.85 8.24 16.57 635 0 0 0 4676.64
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Haulage BY TIPPER
1 1.10 (i) Haulage excluding Loading & Unloading
Haulage of materials by tipper excluding cost of loading, unloading and
stacking.
Unit = t.km
Taking output 10 t load and lead 10 km = 100 t.km
Case-I : Surfaced Road
Speed with load: 25 km per hour
Speed while returning empty: 35 km per hour
a) Machinery
Tipper 10 t capacity
Haulage with load hour 0.40 1015.00 406.00
Empty return trip hour 0.29 1015.00 294.35
b) Over Heads & Contractors profit @ 12.5% on (a) 87.54
Page 227 Tipper 5.5 tonne capacity hour 0.750 1015.00 761.25
Over Heads & Contractors profit @ 12.5% on (a) 121.90
Unit = t
Taking output = 10 t
a) Labour
Mate day 0.06 261.00 15.66
Mazdoor (Unskilled) day 1.60 247.00 395.20
b) Machinery
Truck 10 t capacity hour 1.25 882.00 1102.50
c) Over Heads & Contractors profit @ 12.5% on (a) 189.17
Unit = t
Taking output = 10 t
a) Labour
Mate day 0.05 261.00 13.05
Mazdoor (Unskilled) day 1.20 247.00 296.40
b) Machinery
Truck 10 t capacity hour 1.25 882.00 1102.50
c) Over Heads & Contractors profit @ 12.5% on (a) 176.49
By Manual Means
(A) In area of non-thorny jungle
a) Labour
Mate day 6.00 261.00 1,566.00
Mazdoor (Unskilled) day 150.00 247.00 37,050.00
b) Machinery
Tractor with trolley hour 1.00 518.00 518.00
c) Over Heads & Contractors profit @ 12.5% on (a+b) 4891.75
Rate per hectare = a+b+c (including 1% L.C & 2% Seigniorage Fee) 45,346.52
SAY Ha. 45,346.52
20 2.5 202 Dismantling of Structures
Dismantling of existing structures like culverts, bridges, retaining walls and
other structure comprising of masonry, cement concrete, wood work, steel
work, including T&P and scaffolding wherever necessary, sorting the
dismantled material, disposal of unserviceable material and stacking the
serviceable material with all lifts and lead of 1000 m as per Technical
Specification Clause 202.
Unit = cum
Taking output = 1.25 cum
(I) By Manual Means
(C) Reinforced Cement Concrete
a) Labour
Mate day 0.15 261.00 39.15
BlackSmith day 0.25 330.00 82.50
Mazdoor (Unskilled) day 3.50 247.00 864.50
Machinery
b) Tractor with trolley hour 0.27 558.00 150.66
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Rate for 100 cum = a+b+c+d+e (including 1% L.C & 2% Seigniorage Fee) 14,069.83
Rate per cum = (a+b+c+d+e)/100 140.70
SAY cum 140.70
24 3.4 301.5 Construction of Embankment with Material Obtained from Borrow
Pits
(A) Construction of embankment with approved material obtained from borrow
pits with a lift upto 1.5 m, transporting to site, spreading, grading to
required slope and compacting to meet requirement of Tables 300.1 and
300.2 with a lead upto 1000 m as per Technical Specification Clause
301.5
Unit = cum
Taking output = 100 cum
a) Labour
Mate day 0.04 261.00 10.44
Mazdoor (Unskilled) day 1.00 247.00 247.00
b) Machinery
Hydraulic Excavator 0.9 cum bucket capacity @ 60 cum per hour hour 1.67 1858.00 3,102.86
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Unit = cum
Taking output = 100 cum
a) Labour
Mate day 0.04 261.00 10.44
Mazdoor (Unskilled) day 1.00 247.00 247.00
b) Machinery
Hydraulic excavator 0.9 cum bucket capacity @ 60 cum per hour hour 1.67 1858.00 3,102.86
Truck 10 t capacity, 4 trips per hour hour 4.50 1015.00 4,567.50
Add 10 % of the cost of carriage to cover loading & unloading cum 456.75
Dozer D-50 for spreading @ 100 cum per hour hour 0.50 3150.00 1,575.00
Tractar mounted grader arrangement for grading @ 100 cum per hour hour 1.00 518.00 518.00
Carriage for material below 2.36 mm (Local Sand) Cum 115.00 1399.66 160960.90
Carriage cost 699579.60
B) Carriage cost per cum 2331.93
Rate per cum = A+B(including 1% L.C & 2% Seigniorage Fee) 3166.72
Page 231 SAY CUM 3166.72
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
e) CARRIAGE
Grading-II Cum 435.60 2096.86 913392.22
Stone Screening Cum 96.01 1968.03 188950.56
Binding Material Cum 28.80 2567.43 73941.98
Cost for 360 cum = a+b+c+d+e 1546443.11
Rate per cum = (a+b+c+d+e)/360(including 1% L.C & 2% Seigniorage Fee) 4295.68
Page 232 SAY cum 4295.68
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Unit = sqm
Taking output = 1750 sqm
a) Labour
Mate day 0.04 261.00 10.44
Mazdoor (Unskilled) day 1.00 247.00 247.00
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.40 551.00 771.40
Air compressor 210 cfm hour 1.40 457.00 639.80
Bitumen emulsion pressure distributor @ 1750 sqm per hour hour 1.00 1,531.00 1,531.00
Water tanker 6 kl capacity 1 trip per hour hour 0.50 174.00 87.00
c) Material
Bitumen emulsion (SS-1) @ 0.85 kg per sqm t 1.48 44,037.07 65,174.86
Water kl 3.00 40.00 120.00
d) Over Heads & Contractors profit @ 12.5% on (a+b+c) 8572.69
e) CARRIAGE
Bitumen ton 1.48 3489.10 5163.87
Cost of 1750 sqm = a+b+c+d+e (including 1% Labour Cess) 83,141.24
Rate per sqm = (a+b+c+d+e)/1750(including 1% L.C & 2% Seigniorage Fee) 48.93
SAY sqm 48.93
30 5.2 503 Tack Coat
(I) Providing and applying tack coat with Bitumen emulsion (RS-1) using
emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared
bituminous surface cleaned with Hydraulic broom as per Technical
Specification Clause 503.
Unit = sqm
Taking output = 1750 sqm
a) Labour
Mate day 0.04 261.00 10.44
Mazdoor (Unskilled) day 1.00 247.00 247.00
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.40 551.00 771.40
Air compressor 210 cfm hour 1.40 457.00 639.80
Emulsion pressure distributor @1750 sqm per hour hour 1.00 1,531.00 1,531.00
c) Material
Bitumen emulsion (RS-1) @ 0.225 kg per sqm t 0.48 41,549.63 19,943.82
d) Over Heads & Contractors profit @ 12.5% on (a+b+c) 2892.93
e) CARRIAGE
Bitumen ton 0.48 3489.10 1674.77
Cost of 1750 sqm = a+b+c+d+e (including 1% Labour Cess) 27,988.27
Rate per sqm = (a+b+c+d+e)/1750(including 1% L.C & 2% Seigniorage Fee) 16.47
Page 233 SAY sqm 16.47
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
A. By Manual Means
(I) Bitumen (S-90)
Unit = sqm
Taking output = 1250 sqm
a) Labour
Mate day 0.85 261.00 221.85
Mazdoor (Unskilled) day 15.00 258.00 3,870.00
Mazdoor (Semi-Skilled) day 2.00 252.00 504.00
b) Machinery
Mixall 6/10 t capacity hour 2.50 1,547.50 3,868.75
Three wheel 80-100 kN static roller hour 2.50 777.00 1,942.50
Bitumen boiler oil fired 1000 litre capacity fitted with spray set hour 2.50 283.00 707.50
c) Material
Bitumen (S-90) @ 6.80 kg per 10 sqm t 0.85 35,823.68 30,450.13
Crushed sand or grit as passing 2.36 mm sieve and retained on 180
cum 7.50 71.04 532.80
micron sieve applied @ 0.06 cum per 10 sqm
d) Over Heads & Contractors profit @ 12.5% on (a+b+c) 5262.19
Cost of 1250 sqm without Carriage = (a+b+c+d) 47359.72
A) Basic Cost per sqm = (a+b+c+d)/1250 sqm 37.89
Carriage
Bitumen ton 0.85 2857.10 2428.54
Stonechips Cum 7.50 1968.03 14760.23
Carriage cost of 1250 sqm 17188.76
B) Carriage cost per sqm 13.75
Rate per sqm = (A+B)(including 1% L.C & 2% Seigniorage Fee) sqm 53.19
SUB HEAD : ANALYSIS OF BRIDGES ITEMS
33 11.1 300 Excavation for Structures
Earthwork in excavation for structures as per drawing and technical
specifications Clause 305.1 including setting out, construction of shoring
and bracing, removal of stumps and other deleterious material and
disposal upto a lead of 50 m, dressing of sides and bottom and backfilling
in trenches with excavated suitable material.
I. Ordinary soil
(i) Upto 3 m depth
Unit = cum
Taking output = 10 cum
a) Labour
Mate day 0.32 261.00 83.52
Mazdoor (Unskilled) day 8.00 247.00 1,976.00
b) Over Heads @ 10% on (a) 205.95
c) Contractors Profit @ 10% on (a+b) 226.55
Cost for 10 cum = a+b+c(including 1% L.C & 2% Seigniorage Fee) 2,566.78
Page 234 Rate per cum = (a+b+c)/10 cum 256.68
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
(ii)Upto 3 m to 6m depth
a) Labour
Mate day 0.38 261.00 99.18
Mazdoor (Unskilled) day 9.50 247.00 2,346.50
b) Over Heads @ 10% on (a) 244.57
c) Contractors Profit @ 10% on (a+b) 269.02
Cost for 10 cum = a+b+c (including 1% L.C & 2% Seigniorage Fee) 3,048.05
Rate per cum = (a+b+c)/10 cum 304.81
34 11.4 800 & Providing concrete for plain/reinforced concrete in open foundations
1200 complete as per drawings and technical specifications Clause 802, 803,
1202 & 1203
II. P.C.C grade M 15
(i) Nominal mix (1:2.5:5)
Unit = cum
a) Material
Cement t 0.275 6,219.52 1,710.37
Coarse sand cum 0.48 116.22 55.79
40 mm aggregate cum 0.48 362.48 173.99
20 mm aggregate cum 0.24 479.15 115.00
10 mm aggregate cum 0.08 546.44 43.72
b) Labour
Mate day 0.08 261.00 20.88
Mason (1st Class) day 0.10 330.00 33.00
Mazdoor (Unskilled) day 1.63 247.00 402.61
Bhisti day 0.27 247.00 66.69
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40 80.00 32.00
d) Formwork @ 4% on cost of material, labour and machinery (a+b+c) 106.16
e) Over Heads @ 10% on (a+b+c+d) 276.02
f) Contractors Profit @ 10% on (a+b+c+d+e) 303.62
g) CARRIAGE
Cement t 0.275 495.63 136.30
Coarse sand cum 0.48 1,399.66 671.84
Aggregate cum 0.80 1,968.03 1,574.42
Rate per cum = a+b+c+d+e+f (including 1% L.C & 2% Seigniorage Fee) cum 5,894.07
35 12.39 1100 & Providing and laying of PCC M15 levelling course 100mm thick below
(Mort& 1700 the pile cap.
H)
Unit = cum
Taking output = 15 cum
a) Material
Cement t 4.130 6,219.52 25,686.62
Coarse sand cum 6.75 116.22 784.49
40 mm aggregate cum 8.10 362.48 2,936.09
20 mm aggregate cum 4.05 479.15 1,940.56
10 mm aggregate cum 1.35 546.44 737.69
b) Labour
Mate day 0.86 261.00 224.46
Mason (1st Class) day 1.50 330.00 495.00
Mazdoor (Unskilled) day 20.00 247.00 4,940.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 6.00 80.00 480.00
Generator 33 KVA hour 6.00 1,091.00 6,546.00
d) Over Heads @ 10% on (a+b+c) 4477.09
e) Contractors Profit @ 10% on (a+b+c+d) 4924.80
f) CARRIAGE
Cement t 4.130 495.63 2,046.95
Coarse sand cum 6.75 1,399.66 9,447.71
Aggregate cum 13.50 1,968.03 26,568.41
Rate per cum = (a+b+c+d+e+f)/ 15 (including 1% L.C & 2% Seigniorage Fee) cum 6,333.53
12.8 1500, R.C.C. grade M 30 in Open Foundation complete as per Dwg & Tech
36
(G) 1700 & Specification (Analysis using MoRT&H Data Book)
2100 Using Concrete Mixer
Unit = cum
Taking ouput = 15 cum
a) Material
Cement t 6.10 6,219.52 37,939.07
Coarse sand cum 6.75 116.22 784.49
20 mm aggregate cum 8.10 479.15 3,881.12
10 mm aggregate cum 5.40 546.44 2,950.78
b) Labour
Mate day 0.86 261.00 224.46
Mason (1st Class) day 1.50 330.00 495.00
Mazdoor (Unskilled) day 20.00 247.00 4,940.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 6.00 80.00 480.00
Generator 33 KVA hour 6.00 1,091.00 6,546.00
d) Formwork @ 3.5% on (a+b+c) 2,038.43
e) Over Heads @ 10% on (a+b+c+d) 6027.93
Page 235 f) Contractors Profit @ 10% on (a+b+c+d+e) 6630.73
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
g) CARRIAGE
Cement t 6.10 495.63 3,023.34
Coarse sand cum 6.75 1,399.66 9,447.71
Aggregate cum 13.50 1,968.03 26,568.41
Rate per cum = (a+b+c+d+e+f+g)/15 (including 1% L.C & 2% Seigniorage Fee) cum 7,689.12
Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement
37 12.25 complete as per Drawing and Technical Specifications and removal of
1100 & excavated earth with all lifts and lead upto 1000 m.
1700
Pile Diameter- 1200mm
Unit = meter
Taking ouput = 9m
a) Material
PCC M-35 (With Concrete Mixture, Item 12.11 (c) cum 10.17 7,362.23 74,873.90
b) Labour
Mate day 0.18 261.00 46.98
Mazdoor (Unskilled) day 4.50 247.00 1,111.50
c) Machinery
Hire and running charges of hydraulic piling rig with power unit and
complete accessories including shifting from one bore location to another. hour 6.00 7,453.00 44,718.00
Hire and running charges of light crane for lowering reinforcement cage
hour 0.50 1,217.00 608.50
Rate per cum = (a+b+c+d+e+f)/9 (including 1% L.C & 2% Seigniorage Fee) m 17,175.40
1200, Sub-Analysis
12.11 1500 & PCC grade M-30 (Analysis using MoRT&H Data Book)
38
(C) 1700
Case-I Using Concrete Mixer
Unit = cum
Taking ouput = 15 cum
a) Material
Cement t 6.08 6,219.52 37,814.68
Coarse sand cum 6.75 116.22 784.49
40 mm aggregate cum 5.40 362.48 1,957.39
20 mm aggregate cum 5.40 479.15 2,587.41
10 mm aggregate cum 2.70 546.44 1,475.39
Admixture kg 21.60 100.00 2,160.00
b) Labour
Mate day 0.90 261.00 234.90
Mason (1st Class) day 1.50 330.00 495.00
Mazdoor (Unskilled) day 20.00 247.00 4,940.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 6.00 80.00 480.00
Generator 33 KVA hour 6.00 1,091.00 6,546.00
Light Crane of 3 tonnes capacity for handling tremie pipe hour 6.00 1,217.00 7,302.00
Rate per cum = (a+b+c+d+e+f+g)/15 (including 1% L.C & 2% Seigniorage Fee) cum 4,585.37
39 11.7 1000 & Supplying, fitting and placing HYSD bar reinforcement in foundation
1200 complete as per drawings and technical specifications Clauses 1000 and
1202
Unit = t
a) Material
HYSD bars including 5 per cent for overlaps and wastage t 1.05 52,663.40 55,296.57
Binding wire kg 6.00 63.39 380.34
b) Labour for cutting, bending, shifting to site, tying and placing in
position
Mate day 0.40 261.00 104.40
Blacksmith day 2.00 330.00 660.00
Mazdoor (Unskilled) day 6.00 247.00 1,482.00
c) Over Heads @ 10% on (a+b) 5792.33
d) Contractors Profit @ 10% on (a+b+c) 6371.56
e) CARRIAGE
Reinforcement t 1.05 495.63 520.41
Page 236 Rate per t = a+b+c+d+e (including 1% L.C & 2% Seigniorage Fee) t 72,725.85
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
1500, R.C.C. grade M-30 in Substructure complete as per Dwg & Tech
13.5
40 1700 & Specification (Analysis using MoRT&H Data Book)
(G)
2100
(p) Height Upto 5m
Case-I Using Concrete Mixer
Unit = cum
Taking ouput = 15 cum
a) Material
Cement t 6.10 6,219.52 37,939.07
Coarse sand cum 6.75 116.22 784.49
20 mm aggregate cum 8.10 479.15 3,881.12
10 mm aggregate cum 5.40 546.44 2,950.78
b) Labour
Mate day 0.86 261.00 224.46
Mason (1st Class) day 1.50 330.00 495.00
Mazdoor (Unskilled) day 20.00 247.00 4,940.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 6.00 80.00 480.00
Generator 33 KVA hour 6.00 1,091.00 6,546.00
d) Formwork @ 10% on (a+b+c) 5,824.09
e) Over Heads @ 10% on (a+b+c+d) 6406.50
f) Contractors Profit @ 10% on (a+b+c+d+e) 7047.15
g) CARRIAGE
Cement t 6.10 495.63 3,023.34
Coarse sand cum 6.75 1,399.66 9,447.71
Aggregate cum 13.50 1,968.03 26,568.41
Rate per cum = (a+b+c+d+e+f+g)/15 (including 1% L.C & 2% Seigniorage Fee) cum 8,003.66
(q) Height 5m to 10m
41
Case-I Using Concrete Mixer
Unit = cum
Taking ouput = 15 cum
a) Material
Cement t 6.10 6,219.52 37,939.07
Coarse sand cum 6.75 116.22 784.49
20 mm aggregate cum 8.10 479.15 3,881.12
10 mm aggregate cum 5.40 546.44 2,950.78
b) Labour
Mate day 0.86 261.00 224.46
Mason (1st Class) day 1.50 330.00 495.00
Mazdoor (Unskilled) day 20.00 247.00 4,940.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 6.00 80.00 480.00
Generator 33 KVA hour 6.00 1,091.00 6,546.00
d) Formwork @ 11.5% on (a+b+c) 6,697.70
e) Add for Extra lift @ 1.6% on (a+b+c) 931.85
f) Over Heads @ 10% on (a+b+c+d+e) 6587.05
g) Contractors Profit @ 10% on (a+b+c+d+e+f) 7245.75
h) CARRIAGE
Cement t 6.10 495.63 3,023.34
Coarse sand cum 6.75 1,399.66 9,447.71
Aggregate cum 13.50 1,968.03 26,568.41
Rate per cum = (a+b+c+d+e+f+g+h)/15 (including 1% L.C & 2% Seigniorage Fee) cum 8,153.67
1500, R.C.C. grade M-35 in Substructure complete as per Dwg & Tech
13.5
42 1700 & Specification (Analysis using MoRT&H Data Book)
(H)
2100
(q) Height 5m to 10m
Case-I Using Concrete Mixer
Unit = cum
Taking ouput = 15 cum
a) Material
Cement t 6.33 6,219.52 39,369.56
Coarse sand cum 6.75 116.22 784.49
20 mm aggregate cum 8.10 479.15 3,881.12
10 mm aggregate cum 5.40 546.44 2,950.78
b) Labour
Mate day 0.86 261.00 224.46
Mason (1st Class) day 1.50 330.00 495.00
Mazdoor (Unskilled) day 20.00 247.00 4,940.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 6.00 80.00 480.00
Generator 33 KVA hour 6.00 1,091.00 6,546.00
d) Formwork @ 11.0% on (a+b+c) 6,563.85
e) Add for Extra lift @ 1.4% on (a+b+c) 835.40
f) Over Heads @ 10% on (a+b+c+d+e) 6707.07
g) Contractors Profit @ 10% on (a+b+c+d+e+f) 7377.77
h) CARRIAGE
Cement t 6.33 495.63 3,137.34
Coarse sand cum 6.75 1,399.66 9,447.71
Aggregate cum 13.50 1,968.03 26,568.41
Page 237 Rate per cum = (a+b+c+d+e+f+g+h)/15 (including 1% L.C & 2% Seigniorage Fee) cum 8,261.21
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
43 12.6 1000 Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in
substructrue complete as per drawings and technical specification
Clauses 1002, 1005, 1010 & 1202
Unit = t
a) Material
HYSD bars including 5 per cent overlaps and wastage t 1.05 52,663.40 55,296.57
Binding wire kg 6.00 63.39 380.34
b) Labour for cutting, bending, shifting to site, tying, and placing in position
Add 1 per cent of cost of bearing assembly for foundation anchorage bolts
353.50
and and consumables.
c) Over Heads @ 10% on (a+b) 3625.14
d) Contractors Profit @ 10% on (a+b+c) 3987.65
Cost for 250 tonnes capacity bearing = a+b+c+d 43,864.17
Unit = Nos
Taking output = 30 Nos
Page 238 a) Material
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Unit = cum
Taking output = 10 cum
a) Material
Filter media as per specification cum 12.00 381.35 4,576.20
b) Labour
Mate day 0.40 261.00 104.40
Mazdoor (Unskilled) day 9.00 247.00 2,223.00
Mazdoor (Skilled) day 1.00 313.00 313.00
Bhisti day 0.50 247.00 123.50
c) Over Heads @ 10% on (a+b) 734.01
d) Contractors Profit @ 10% on (a+b+c) 807.41
e) CARRIAGE
Filter Material cum 12.00 1,968.03 23,616.36
Cost for 10 cum of filter media = a+b+c+d+e 32,497.88
(a+b+c+d+e)/10 (including 1% L.C & 2% Seigniorage Fee) cum 3,347.28
49 13.1 800 Providing and laying reinforced cement concrete in superstructure as
per drawing and technical specifications Clauses 800, 1205.4 and 1205.5
II. R.C.C M 30
Height 5m to 10m
Unit =cum
a) Material
Cement t 0.41 6,219.52 2,529.27
Coarse sand cum 0.45 116.22 52.30
20 mm aggregate cum 0.54 479.15 258.74
10 mm aggregate cum 0.36 546.44 196.72
b) Labour
Mate day 0.08 261.00 20.88
Mason (1st Class) day 0.12 330.00 39.60
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Unit = Runing m
Taking output = 4x12 m
Span = 48 m
a) M 25 grade R.C.C.
No. of vertical posts = (6+1) 4 = 28 nos
Cross-sectional area of vertical post = 0.25x0.275 = 0.069 sqm
Concrete in vertical posts = 0.069 x28x1.00 = 1.932 cum
Hand rail in 3 tiers = 3x48 = 144 m
Cross-sectional area = 0.17x0.175 = 0.03 sqm
Concrete in hand rails = 0.03 x 144 = 4.32 cum
Total concrete = 1.932+4.32 = 6.252 cum cum 6.25 6,737.07 42,120.13
b) HYSD bar reinforcement (Rate as per item 13.2) t 1.36 73,923.81 100,536.39
c) Over Heads @ 10% on (a+b) 14265.65
d) Contractors Profit @ 10% on (a+b+c) 15692.22
e) CARRIAGE
Cost for 48 m = (a+b+c+d+e) (including 1% L.C & 2% Seigniorage Fee) 177,792.82
Rate per m = (a+b+c+d+e)/48 3,704.02
Sub Analysis for Rate of Concrete
a) Material
Cement t 0.40 6,219.52 2,487.81
Coarse sand cum 0.45 116.22 52.30
20 mm aggregate cum 0.54 479.15 258.74
10 mm aggregate cum 0.36 546.44 196.72
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Unit = sqm
Page 242 Taking Output = 200 sqm
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
a) Labour
Mate day 0.01 116.22 1.16
Mazdoor (Unskilled) day 0.30 261.00 78.30
b) Machinery
Mixall 6/10 tonne hour 2.00 1,547.50 3,095.00
Bitumen Pressure distributor hour 2.00 1,531.00 3,062.00
Three wheeled 80-100 kN Static Roller hour 4.00 777.00 3,108.00
c) Material
Bitumen for pre-mix carpet @ 14.60 Kg/10 sqm 200 x 14.60/ 10 = 292 Kg tonne 0.292 35,823.68 10,460.51
Bitumen for tack coat @ 2 kg per 10 sqm 200 x 2/ 10 = 40 Kg tonne 0.04 35,823.68 1,432.95
Bitumen for seal coat @ 6.8 kg per 10 sqm 200 x 6.8/ 10 = 136 Kg tonne 0.136 35,823.68 4,872.02
Crushed stone aggregate @ 0.27 cum per 10 sqm 200 x 0.27/ 10 = 5.4
cum 5.40 384.01 2,073.65
cum
Crushed sand passing 2.36 mm sieve and retained on 180 micron sieve
@0.06 cum per 10 sqm. cum 1.20 71.04 85.25
200 x 0.06/ 10 = 1.2 cum
d) Over Heads @ 10% on (a+b+c) 2826.88
e) Contractors Profit @ 10% on (a+b+c+d) 3109.57
Cost of 200 sqm = (a+b+c+d+e) = 34205.30
Cost per sqm = (a+b+c+d+e)/200 (including 1% L.C & 2% Seigniorage Fee) 176.16
say sqm 176.16
62 15.1 1900 Maintenance of RCC Railing
Repair of RCC railing to bring it to the original shape, cleaning and
repainting as per drawings and technical specification Clause 1911
Unit = running meter
Taking Output = 1 m
It is assumed that the damage is upto the extent of 10%
a) Labour
Mate day 0.012 261.00 3.13
Mason (1st Class) day 0.20 330.00 66.00
Mazdoor (Unskilled) day 0.10 247.00 24.70
b) Material
M-30 Grade Concrete cum 0.100 8,003.66 800.37
Steel Reinforcement tonne 0.013 73,923.81 961.01
c) Over Heads @ 10% on (a+b) 185.52
d) Contractors Profit @ 10% on (a+b+c) 204.07
Rate per Meter = (a+b+c+d) (including 1% L.C & 2% Seigniorage Fee) m 2,312.14
63 '12.11 (iv) Sub-Analysis
C PCC grade M-35 (Analysis using MoRT&H Data Book)
Case I Using Concrete Mixer
Unit = 1 cum
Taking output = 15 cum
(a) Material
Cement tonne 6.29 6,219.52 39,120.78
Coarse sand cum 6.75 116.22 784.49
40 mm Aggregate cum 5.40 362.48 1,957.39
20 mm Aggregate cum 5.40 479.15 2,587.41
10 mm Aggregate cum 2.70 546.44 1,475.39
Admixture Kg 21.60 100.00 2,160.00
(b) Labour
Mate day 0.90 261.00 234.90
Mason (1st Class) day 1.50 330.00 495.00
Mazdoor (Unskilled) day 20.00 247.00 4,940.00
(C) Machinery
Concrete mixer (cap. 0.40/0.28 cum) hour 6.00 80.00 480.00
Generator 33 KVA hour 6.00 1,091.00 6,546.00
Light Crane of 3 tonnes capacity for handling tremie pipe hour 6.00 1,217.00 7,302.00
d) CARRIAGE
Cement t 6.29 495.63 3,117.51
Coarse sand cum 6.75 1,399.66 9,447.71
Aggregate cum 13.50 1,968.03 26,568.41
Rate per cum = (a+b+c)/15 (including 1% L.C & 2% Seigniorage Fee) cum 7,362.23
64 10.16 1700 Providing and Fixing 'Logo' of Project
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
Providing and Fixing 'Logo' of Project informayory sign board with Logo as
per MORD specifications and drawing. Three MS plates of 1.6mm thick,
top and middle plate duly welded with MS flat iron 25mm x 5 m size on
back on edges. The lower plate will be welded with MS angle iron frame
of 25mm x 25mm 5mm. The angle iron frame of the lower most plate and
flat iron frame of middle plate will be welded to 2 Nos. 75mm x 75 mm of
12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade
blocks of 450mm x 450mm x 600 mm,600 mm,600 below ground level.
The top most diamond plate will be welded to middle plate by 47mm x
47mm of 12SWG steel plate tube. All M.S will be stove enameled on both
sides. Lettering and printing arrows, border etc, will be painted with ready
mixed synthetic enamer paint of superior quality in required shade and
colour. All sections of framed posts and steel tube will be painted with
primer and two coats of epoxy paint as per drawing Clause 1701 abd
Annexure 1700.1.
C Assuming span length 30 m, width of service road 10m and depth of water
1m
Unit = 1 meter
Taking output = 30 metre
a) Material
Earth cum 450.00 1.71 769.50
Sand bags each 300.00 0.00 0.00
b) Labour
Mate day 0.24 261.00 62.64
Mazdoor for filling sand bags, stitching and placing day 6.00 247.00 1482.00
c) Machinery
Front end Loader 1 cum capacity hour 27.00 1371.00 37017.00
Tipper 5.5 cum capacity hour 28.00 1015.00 28420.00
d) Over Heads @ 10% on (a+b+c) 6775.11
e) Contractors Profit @ 10% on (a+b+c+d) 7452.63
Cost for 30 m (a+b+c+d+e) 81978.88
Rate per m (a+b+c+d+e)/30 (including 1% L.C & 2% Seigniorage Fee) 2,814.61
61 9.3 Providing and Laying Reinforced Cement Concrete Pipe NP3 as per
design in Single Row
1100 Providing and laying reinforced cement concrete pipe NP3 for culverts on
first class bedding of granular material in single row including fixing collar
with cement mortar 1:2 but excluding excavation, protection works,
backfilling, concrete and masonry works in head walls and parapets
Clause 1106.
B. 1000 MM DIA
Unit =m
Taking output =7.5 m
( 3 pipes of 2.5 m length each )
a ) Material
I) Sand at site cum 0.04 305.49 12.22
ii ) Cement at site ton 0.03 6715.15 201.45
iii) RCC pipe NP 3 pipe including collar at site m 7.50 3432.63 25744.73
b ) Labour
Mate day 0.09 261.00 23.49
Mason ( 1st class ) day 0.25 330.00 82.50
Mazdoor ( Unskilled ) day 2.00 247.00 494.00
c)Overheads @10 % on (a+b) 2655.84
d)Contractor’s profit @ 10% on (a+b+c) 2921.42
Cost for 7.5m = ( a+b+c+d) 32135.65
Rate per m =(a+b+c+d)/7.5 4284.75
Page 245 Total Cost including (including 1% L.C & 2% Seigniorage Fee) 4413.30
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
62 12.22 1200 Providing steel liner 10 mm thick for curbs and 6mm
&1900 thick for steining of wells including fabricating and
setting out as per detailed drawing
Unit = 1 MT
Taking Output = 1 MT
a) Material
i) Structural Steel including 5% Westage ton 1.05 100000.00 105000.00
b) Labour
Mate Day 1.24 261.00 323.64
Fitter Day 6.00 336.00 2016.00
Blacksmith Day 5.00 330.00 1650.00
Welder Day 5.00 370.00 1850.00
Mazdoor Day 10.00 313.00 3130.00
Electrodes,Cutting Gas and Other Consumables @ 5 percent on cost a (a)
5250.00
above
c)Overheads @20 % on (a+b) 23843.93
d)Contractor’s profit @ 10% on (a+b+c) 14306.36
Rate per MT (a+b+c+d) 157369.92
e) CARRIAGE
Structural Steel ton 1.1 495.63 520.41
Total Cost including (including 1% L.C & 2% Seigniorage Fee) 162611.43
63 14.22 2607
Strip Seal Expansion Joint (Providing and laying of a strip seal expansion
joint catering to maximum horizontal movement upto 70 mm, complete as
per approved drawings and standard specifications to be installed by the
manufacturer/supplier or their authorised representative ensuring
compliance to the manufacturer's instructions for installation.)
Unit = Running meter
Taking Output = 12 MT
a) Labour
Mate Day 0.05 261.00 13.05
Mazdoor Day 1.00 247.00 247.00
Mazdoor (Skilled) Day 0.25 313.00 78.25
b) Material
Supply of Cmplete assembly of strip seal expension joint comprising of
edgr beams, anchorege, strip seal element and complete accessories as metre 12.00 8,398.35 100780.20
per approved specification and drawing.
Add 5 % of cost of material for anchorage reinforcement, welding and
5055.93
other incidentals (a+b)
c)Overheads @20 % on (a+b) 21234.89
d)Contractor’s profit @ 10% on (a+b+c) 12740.93
Rate per MT (a+b+c+d)/12 11679.19
Total Cost including (including 1% L.C & 2% Seigniorage Fee) 12029.56
64 14.18 2605
(ii) Providing & fixing 20 mm thick compressible fibre board in expansion joint
complete as per drawing & Technical Specification.
Unit = Running meter
Taking Output = 12 MT
a) Labour (For carrying, placing & fixing)
Mate Day 0.008 261.00 2.09
Mazdoor Day 0.10 247.00 24.70
Mazdoor (Skilled) Day 0.10 313.00 31.30
b) Material
20mm thick compressible fibre board 12 m long x 25 cm deep (Area =
SQM 3.00 842.89 2528.67
12x 0.25 = 3 sqm)
c)Overheads @20 % on (a+b) 517.35
d)Contractor’s profit @ 10% on (a+b+c) 310.41
Rate per MT (a+b+c+d)/12 284.54
Total Cost including (including 1% L.C & 2% Seigniorage Fee) 293.08
65 14.18 2605
(iii) Providing and fixing in position 20 mm thick premoulded joint filler in
expansion joint for fixed ends of simply supported spans not exceeding 10
m to cater for a horizontal movement upto 20 mm, covered with sealant
complete as per drawing and technical specifications.
Add 1 per cent of cost of bearing assembly for foundation anchorage bolts
282.80
and and consumables.
c) Over Heads @ 20% on (a+b) 5822.14
d) Contractors Profit @ 10% on (a+b+c) 3493.28
Cost for 250 tonnes capacity bearing = a+b+c+d 38,426.10
Page 247 Rate per t = a+b+c+d(including 1% L.C & 2% Seigniorage Fee) t 39,578.88
1 5.11 509 Mix Seal Surfacing
Type A Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or
13.2
Casemm- II to
By0.9 mm (Type-B)
Mechanical aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on
Means
(i) Bitumen (S-90)/(80/100grade)
Unit = sqm
Taking output = 4000 sqm (80 cum)
(a) Labour
Mate day 0.52 261.00 135.72
Mazdoor (Unskilled) day 10.00 247.00 2,470.00
Mazdoor (Unskilled) for Waste Plastic day 2.00 247.00 494.00
Mazdoor (Skilled) day 3.00 313.00 939.00
b) Machinery
HMP of appropriate capacity hour 6.00 20,896.00 125,376.00
Electric generator set 125 KVA hour 6.00 2,502.00 15,012.00
Front end loader 1 cum bucket capacity hour 6.00 1,291.00 7,746.00
Tipper 5.5 10 t capacity hour 3.60 937.00 3,373.20
Paver finisher hour 6.00 76.35 458.10
Three wheel 80-100 kN static roller hour 6.00 725.00 4,350.00
c) Material
Bitumen (S-90) @ 19 kg per 10 sqm t 7.60 32,096.00 243,929.60
Sl. SDB MORD Analysis of Rates ( FORMAT F8 ) Amount
DESCRIPTION Unit Quantity Rate
No. Sl. No. Ref No. (in Rs)
t 25,168.50
Processed Waste Plastic i.e 8% of 22 kg bitumen = 1.76 kg per 10 sqm 0.47 53,550.00
cum 43,543.44
Stone crushed aggregates 13.2 mm to 0.09 mm @ 0.27 cum per 10 sqm 108.00 403.18
d) Overheads & Contractor's Profit @ 12.5 % on (a+b+c) 59,124.45
Cost of 4000 sqm = a+b+c+d 532,120.01
Rate per sqm = (a+b+c+d)/4000 133.03
Carriage Cost
Bitumen (S-90) ton 0.0019 2,857.10 5.43
Stone chips cum 0.0270 1,968.03 53.14
Rate per sqm with carriage 191.60
Total Cost including 1 % L.C & 2% Seigniorage Fee Sqm 197.34
QUARY CHART
Stone Boulder
Place :- Silliguri
By Rail :- 0.00km
By Road :- 145.00km
Cement / Steel
Place :- Kisanganj
By Rail :-
By Road :- 35.00km
S.E.
RWD (w) Division,Supaul Page 248
PAVEMENT DESIGN
Crust Composition
75 Bituminous Surface Treated WBM
Base of Gravel/ WBM (Where thickness is recommended, it may
100 modified to 75 mm thickness for WBM construction, with corresponding
increase of 25mm in Subbase thickness)
Granular Sub base ( CBR not less than 20 in exceptional case may be
relaxed to 15)
150
SUB BASE
GSB with Stone Metal 175 mm
BASE COURSE
WBM GR-II 75 mm
WBM GR-III 75 mm
SURFACING
PREMIX CARPET OVER PRIME COAT 20 mm
TACK COAT
SEAL COAT
PRADHAN MANTRI GRAM SADAK YOJANA (PMGSY)
SUMMARY OF 3-DAY COUNTS
Name of Road Construction of RCC Bridge over Sursar river at Mahaddipur bazar to Chhatapur road in Supaul dist.
Link Route No. 0
Block Kishanpur
District Supaul
State Bihar
Vehicle Class
Cars,
Jeeps, Motorised Light Commercial Agricultural Animal
DAY Trucks Buses Cycle Total
Vans, two- Vehicles Tractors/ Trailers Cycles Drawn
Rickshaws
Three- wheelers Vehicles
wheelers Laden Unladen Laden Unladen Laden Unladen Laden Unladen
ESAL per Day - - 1.43 0.07 1.34 0.14 8.41 0.55 0 0 - - - 11.95
1.2 x n x T x t
* AADT at the time of Traffic survey from ADT (Tо) = T+
365
where,
T= ADT at the time of traffic survey
n= Ratio of Harvesting season traffic to Lean season traffic
t = Harvesting period in no. of Days
where,
Tо = AADT at the time of Traffic survey
r = Traffic growth rate
n = Time period between traffic survey & opening of bridge to traffic
There are two harvesting seasons in the area each having a duration of about 2½ months, the
harvesting season traffic remaining at its peak for 15 days
The traffic data was collected 2 years before opening the road to traffic and in the lean season. It
may be assumed that peak harvesting season traffic is double the lean season traffic.
Where,
Te = ESAL per day
r = Growth rate of traffic over the desing life
n = Design life of pavement
L = Lane distribution factor.
Here,
Te = 11.94756
r = 6%
n = 10
L = 1
Therefore,
Cumulative ESAL applications over 10 (1+ 0.01x 6)^10 - 1
11.94756 x 365 x X1.25
years @ 6% growth rate = 0.01 x 6
71849.65