Professional Documents
Culture Documents
One-touch
Fully-automatic calibration
Here’s How
PSD (Position-Sensitive Detector) A.P.R. circuit (Automatic Power Reinforcement)
The target distance is detected according to the angle of Stable detection is possible due to the A.P.R. circuit
the reflected light beam. which automatically adjusts the amount of light emitted
• Unaffected by a highly reflective target background according to the color and angle of the target.
• Stable detection of targets with colors and materials of
varying reflectance
• Highly accurate detection of minute objects
OFF
ON
ON OFF
MEGA POWER
Long-range detection twice as far as
conventional models
1.2’)
High-power thrubeam type PZ-G52 been bumped out of marked directly onto the sensor housing.
(13 alignment? How can There are no labels, inks or paints to peel
Detec
ting distan
ce: 4 0m 4longer
times *
detecting distance
you tell?
Thrubeam PZ-G
models feature a bright
or chip off into your products.
2fastertimes
response speed
*
alerts you the instant
proper alignment has
been obtained. This
simple yet crucial
* Compared with our conventional models feature allows you to
troubleshoot setup and
run-time issues
quickly, before they
can snowball into Easy-to-see blue trimmer
major problems. Enhances operation efficiency
2fastertimes
response speed
*
Slide it through
Slide it through
tan 1
because its wavelength can be easily observed by the
c e : human eye and the intensity change over time is small.
s
ting di
Detec * Compared with our conventional models
1.2’)
High-power thrubeam type PZ-G52 been bumped out of marked directly onto the sensor housing.
(13 alignment? How can There are no labels, inks or paints to peel
Detec
ting distan
ce: 4 0m 4longer
times *
detecting distance
you tell?
Thrubeam PZ-G
models feature a bright
or chip off into your products.
2fastertimes
response speed
*
alerts you the instant
proper alignment has
been obtained. This
simple yet crucial
* Compared with our conventional models feature allows you to
troubleshoot setup and
run-time issues
quickly, before they
can snowball into Easy-to-see blue trimmer
major problems. Enhances operation efficiency
2fastertimes
response speed
*
Slide it through
Slide it through
tan 1
because its wavelength can be easily observed by the
c e : human eye and the intensity change over time is small.
s
ting di
Detec * Compared with our conventional models
Standard M8 and M12 quick-disconnects Our oil-resistant cable ensures reliable Thrubeam The long-range high-power beam makes it easy to align the optical axis
make replacement easier operation in an oily environment
The PZ-G features a standard pin-out, which allows it to be In addition to the standard PVC cable, an oil-resistant PUR High-power PZ-G52 Standard PZ-G51
a drop-in replacement with existing wiring. cable is available for use in harsh environments.
Long-range detection Long-range detection
40m (131.2’) 20m (65.6’)
Threaded type
M12 connector
High-power High-intensity
dual IR LED 4-element red LED
Alignment Alignment
Indicator Indicator
Rectangular type Clearly indicates when Clearly indicates when
M8 connector emitter/receiver are emitter/receiver are
properly aligned. properly aligned.
PUR cable
Brown (Pin1)
DC10−30V
Short-range
Sensor main circuit
detection
protection circuit
Black (Pin 4)
300mm
Overcurrent
White (Pin 2)
(11.81") Short-range
NPN control output High-intensity Detecting
detection distance of
4-element
Blue (Pin 3)
0V
200mm red LED 5 to 45 mm
High-intensity
(7.87") (0.20" to 1.77")
M12 connector
4-element red LED
2 High-intensity
Bipolar output type 3 1 4-element red LED
PZ-G**(C)B 4 Spot diameter of Spot diameter of
Long-range detection approx. 5 mm (0.20") at a approx. 2 mm (0.08") at a
The mounting brackets shown above are only part of the lineup.
See page 7 for further details. 1m (3.3’) detecting distance of detecting distance of
100 mm (3.94") 40 mm (1.58")
P.R.O. function
Different frequency beam The P. R. O. function*
cancels direct
reflections from metallic DEX circuit
Differentiating the or mirror surfaced The PZ-G employs a DEX circuit*
High-intensity targets, allowing the (patented) that greatly amplifies the slight
number of sheets
4-element red LED PZ-G to reliably detect light attenuation caused by transparent
The different frequency function automatically shifts the emission cycle if ambient metal targets. targets ensuring stable detection.
light is received by the receiver. * Polarized Reflection Optics * Difference Expansion
4 5
Enhanced user-friendliness Model features
Threaded models Rectangular models
Standard M8 and M12 quick-disconnects Our oil-resistant cable ensures reliable Thrubeam The long-range high-power beam makes it easy to align the optical axis
make replacement easier operation in an oily environment
The PZ-G features a standard pin-out, which allows it to be In addition to the standard PVC cable, an oil-resistant PUR High-power PZ-G52 Standard PZ-G51
a drop-in replacement with existing wiring. cable is available for use in harsh environments.
Long-range detection Long-range detection
40m (131.2’) 20m (65.6’)
Threaded type
M12 connector
High-power High-intensity
dual IR LED 4-element red LED
Alignment Alignment
Indicator Indicator
Rectangular type Clearly indicates when Clearly indicates when
M8 connector emitter/receiver are emitter/receiver are
properly aligned. properly aligned.
PUR cable
Brown (Pin1)
DC10−30V
Short-range
Sensor main circuit
detection
protection circuit
Black (Pin 4)
300mm
Overcurrent
White (Pin 2)
(11.81") Short-range
NPN control output High-intensity Detecting
detection distance of
4-element
Blue (Pin 3)
0V
200mm red LED 5 to 45 mm
High-intensity
(7.87") (0.20" to 1.77")
M12 connector
4-element red LED
2 High-intensity
Bipolar output type 3 1 4-element red LED
PZ-G**(C)B 4 Spot diameter of Spot diameter of
Long-range detection approx. 5 mm (0.20") at a approx. 2 mm (0.08") at a
The mounting brackets shown above are only part of the lineup.
See page 7 for further details. 1m (3.3’) detecting distance of detecting distance of
100 mm (3.94") 40 mm (1.58")
P.R.O. function
Different frequency beam The P. R. O. function*
cancels direct
reflections from metallic DEX circuit
Differentiating the or mirror surfaced The PZ-G employs a DEX circuit*
High-intensity targets, allowing the (patented) that greatly amplifies the slight
number of sheets
4-element red LED PZ-G to reliably detect light attenuation caused by transparent
The different frequency function automatically shifts the emission cycle if ambient metal targets. targets ensuring stable detection.
light is received by the receiver. * Polarized Reflection Optics * Difference Expansion
4 5
Sensor head lineup / Model variations Options
Cable models
One-touch mounting bracket
Cable models
One-touch mounting bracket
Model For use with: Description Number included Material Weight M8 connector
OP-85136 Thrubeam (Rectangular models) Attachment A (for attaching a slit or a polarization filter) 2 sets Polyacetal (POM) Approx. 2 g Sensor connection Opposite connection
Cable
OP-85135* Thrubeam (threaded models) Attachment B (for attaching a slit or a polarization filter) 2 sets Polyacetal (POM) Approx. 1 g Model material Description Cable length (m ft) Weight
Connector size Design Connector size Design
OP-85137 Thrubeam (square/threaded models) Slit (0.5 mm 0.02", 1 mm 0.04", 2 mm 0.08") 3sets Polyvinyl chloride (PVC) Approx. 1 g
Triacetate (TAC) OP-73864 M8 Straight ― Loose wires 2 (6.6’) Approx. 55 g
OP-85138 Thrubeam (red LED models) Polarization filter A (for the red LED type) 2 pieces Approx. 1 g
Polyvinyl alcohol (PVA) OP-73865 Connector - loose wires M8 Straight ― Loose wires 10 (32.8’) Approx. 220 g
PVC
OP-85139 Thrubeam (red IR LED models) Polarization filter B (for the red IR LED type) 3 pieces Acetate plastic Approx. 1 g OP-85497 M8 L-shaped ― Loose wires 2 (6.6’) Approx. 55 g
* OP-85135 cannot be attached when using PZ-B82 one-touch mounting bracket. OP-85498 Connector - connector M8 Straight M8 Straight 2 (6.6’) Approx. 55 g
OP-85499 M8 Straight ― Loose wires 2 (6.6’) Approx. 65 g
OP-85500 Connector - loose wires M8 Straight ― Loose wires 10 (32.8’) Approx. 310 g
Specifications when an attachment is used OP-85584 M8 L-shaped ― Loose wires 2 (6.6’) Approx. 65 g
OP-85585 M8 L-shaped ― Loose wires 10 (32.8’) Approx. 310 g
Sensor Slit (mm inch) Polarization filter Detecting distance (m ft) OP-85501 PUR M8 Straight M8 Straight 2 (6.6’) Approx. 75 g
model
OP-85586 M8 L-shaped M8 Straight 2 (6.6’) Approx. 75 g
0.5 x 5 (0.02" x 0.20") 1 (3.3’) OP-85509 M8 Straight M12 Straight 2 (6.6’) Approx. 80 g
1 x 5 (0.04" x 0.20") 2.5 (8.2’) Connector - connector
OP-85510 M8 Straight M12 Straight 5 (16.4’) Approx. 165 g
2 x 5 (0.08" x 0.20") 5 (16.4’) OP-85587 M8 L-shaped M12 Straight 2 (6.6’) Approx. 80 g
PZ-G51 Attached* 9 (29.5’) OP-85588 Approx. 170 g
M8 L-shaped M12 Straight 5 (16.4’)
0.5 x 5 (0.02" x 0.20") Attached* 0.5 (1.6’)
* One piece is included.
1 x 5 (0.04" x 0.20) Attached* 1.5 (4.9’)
2 x 5 (0.08" x 0.20") Attached* 3 (9.8’) M12: Straight M12: Straight M12: L-shaped
0.5 x 5 (0.02" x 0.20") 2.5 (8.2’) PVC PUR PVC
1 x 5 (0.04" x 0.20") 5.5 (18.0’)
2 x 5 (0.08" x 0.20") 10 (32.8’)
PZ-G52 Attached* 15 (49.2’)
0.5 x 5 (0.02" x 0.20") Attached* 1 (3.3’)
1 x 5 (0.04" x 0.20") Attached* 2 (6.6’)
2 x 5 (0.08" x 0.20") Attached* 5 (16.4’)
* When attaching to make the polarization direction of the transmitter and the receiver same. M12 connector
Sensor connection Opposite connection
Cable Description Cable length (m ft) Weight
Model material
[ Usage example 1 ] [ Usage example 2 ] Connector size Design Connector size Design
Suppressing interference between two thrubeam sensors Suppressing interference between four thrubeam-type sensors OP-75721 M12 Straight ― Loose wires 2 (6.6’) Approx. 65 g
Interference between thrubeam sensors With another set of sensors OP-85502 Connector - loose wires M12 Straight ― Loose wires 10 (32.8’) Approx. 230 g
can be suppressed with polarization Direction A set as in Usage Example 1, Transmitter OP-75722 PVC M12 L-shaped ― Loose wires 2 (6.6’) Approx. 65 g
filters. A polarization filter’s characteristic Direction B interference between four OP-85503 M12 Straight M12 Straight 2 (6.6’) Approx. 70 g
Transmitter Connector - connector
depends on the direction and notch in Polarization filter sensors can be suppressed OP-85504 M12 Straight M12 Straight 5 (16.4’) Approx. 130 g
Receiver OP-85505 M12 Straight ― Loose wires 2 (6.6’) Approx. 75 g
which it is set. If the polarization direction Transmitter by alternating the positions Connector - loose wires
OP-85506 M12 Straight ― Loose wires 10 (32.8’) Approx. 320 g
of the filters attached to the transmitter of the transmitters and the Receiver PUR
Transmitter OP-85507 M12 Straight M12 Straight 2 (6.6’) Approx. 90 g
and the receiver is the same, the beam receivers. Be sure to pay Connector - connector
Receiver OP-85508 M12 Straight M12 Straight 5 (16.4’) Approx. 175 g
can be received. If the direction of the attention to the direction of
* One piece is included.
filter is changed by 90 degrees, however, the notches on the filters. Receiver
the beam cannot be received. Using this
Transmitter
restriction, interference can be Receiver
suppressed with polarization filters as
shown.
Receiver Transmitter
Input/output circuits
* Remove the protective sheets on both sides of the polarization filter before use.
* Adjust the sensitivity if interference occurs even with polarization filters.
Thrubeam transmitter NPN output (thrubeam receiver, reflective, retro-reflective)
PZ-G5*(C)PZ-G5*(C)B M8 connector PZ-G**(C)N
Brown (Pin 1) 2 4 Brown (Pin 1) M8 connector
DC10-30V DC10-30V
1 3
2 4
main circuit
main circuit
1 3
Sensor
protection circuit
Black (Pin 4)
Sensor
Reflectors NPN control output
Overcurrent
M12 connector
2
OP-84219 OP-96436 R-5 OP-84221 3 1
Blue (Pin 3) Blue (Pin 3)
0V 4 0V
PNP output (thrubeam receiver, reflective, retro-reflective) Bipolar output (thrubeam receiver, reflective, retro-reflective)
PZ-G**(C)P PZ-G**(C)B
Brown (Pin 1) M8 connector Brown (Pin 1) M12 connector
Detecting distance (m ft) DC10-30V DC10-30V
Number 2 4 2
Model For use with: Description Material Weight
main circuit
main circuit
protection circuit
PZ-G61 PZ-G62 included 3 1
1 3 Black (Pin 4)
Overcurrent
protection circuit
Sensor
Long-range Transparent object detection
Sensor
8 9
Options Cables / Input/output circuits
Model For use with: Description Number included Material Weight M8 connector
OP-85136 Thrubeam (Rectangular models) Attachment A (for attaching a slit or a polarization filter) 2 sets Polyacetal (POM) Approx. 2 g Sensor connection Opposite connection
Cable
OP-85135* Thrubeam (threaded models) Attachment B (for attaching a slit or a polarization filter) 2 sets Polyacetal (POM) Approx. 1 g Model material Description Cable length (m ft) Weight
Connector size Design Connector size Design
OP-85137 Thrubeam (square/threaded models) Slit (0.5 mm 0.02", 1 mm 0.04", 2 mm 0.08") 3sets Polyvinyl chloride (PVC) Approx. 1 g
Triacetate (TAC) OP-73864 M8 Straight ― Loose wires 2 (6.6’) Approx. 55 g
OP-85138 Thrubeam (red LED models) Polarization filter A (for the red LED type) 2 pieces Approx. 1 g
Polyvinyl alcohol (PVA) OP-73865 Connector - loose wires M8 Straight ― Loose wires 10 (32.8’) Approx. 220 g
PVC
OP-85139 Thrubeam (red IR LED models) Polarization filter B (for the red IR LED type) 3 pieces Acetate plastic Approx. 1 g OP-85497 M8 L-shaped ― Loose wires 2 (6.6’) Approx. 55 g
* OP-85135 cannot be attached when using PZ-B82 one-touch mounting bracket. OP-85498 Connector - connector M8 Straight M8 Straight 2 (6.6’) Approx. 55 g
OP-85499 M8 Straight ― Loose wires 2 (6.6’) Approx. 65 g
OP-85500 Connector - loose wires M8 Straight ― Loose wires 10 (32.8’) Approx. 310 g
Specifications when an attachment is used OP-85584 M8 L-shaped ― Loose wires 2 (6.6’) Approx. 65 g
OP-85585 M8 L-shaped ― Loose wires 10 (32.8’) Approx. 310 g
Sensor Slit (mm inch) Polarization filter Detecting distance (m ft) OP-85501 PUR M8 Straight M8 Straight 2 (6.6’) Approx. 75 g
model
OP-85586 M8 L-shaped M8 Straight 2 (6.6’) Approx. 75 g
0.5 x 5 (0.02" x 0.20") 1 (3.3’) OP-85509 M8 Straight M12 Straight 2 (6.6’) Approx. 80 g
1 x 5 (0.04" x 0.20") 2.5 (8.2’) Connector - connector
OP-85510 M8 Straight M12 Straight 5 (16.4’) Approx. 165 g
2 x 5 (0.08" x 0.20") 5 (16.4’) OP-85587 M8 L-shaped M12 Straight 2 (6.6’) Approx. 80 g
PZ-G51 Attached* 9 (29.5’) OP-85588 Approx. 170 g
M8 L-shaped M12 Straight 5 (16.4’)
0.5 x 5 (0.02" x 0.20") Attached* 0.5 (1.6’)
* One piece is included.
1 x 5 (0.04" x 0.20) Attached* 1.5 (4.9’)
2 x 5 (0.08" x 0.20") Attached* 3 (9.8’) M12: Straight M12: Straight M12: L-shaped
0.5 x 5 (0.02" x 0.20") 2.5 (8.2’) PVC PUR PVC
1 x 5 (0.04" x 0.20") 5.5 (18.0’)
2 x 5 (0.08" x 0.20") 10 (32.8’)
PZ-G52 Attached* 15 (49.2’)
0.5 x 5 (0.02" x 0.20") Attached* 1 (3.3’)
1 x 5 (0.04" x 0.20") Attached* 2 (6.6’)
2 x 5 (0.08" x 0.20") Attached* 5 (16.4’)
* When attaching to make the polarization direction of the transmitter and the receiver same. M12 connector
Sensor connection Opposite connection
Cable Description Cable length (m ft) Weight
Model material
[ Usage example 1 ] [ Usage example 2 ] Connector size Design Connector size Design
Suppressing interference between two thrubeam sensors Suppressing interference between four thrubeam-type sensors OP-75721 M12 Straight ― Loose wires 2 (6.6’) Approx. 65 g
Interference between thrubeam sensors With another set of sensors OP-85502 Connector - loose wires M12 Straight ― Loose wires 10 (32.8’) Approx. 230 g
can be suppressed with polarization Direction A set as in Usage Example 1, Transmitter OP-75722 PVC M12 L-shaped ― Loose wires 2 (6.6’) Approx. 65 g
filters. A polarization filter’s characteristic Direction B interference between four OP-85503 M12 Straight M12 Straight 2 (6.6’) Approx. 70 g
Transmitter Connector - connector
depends on the direction and notch in Polarization filter sensors can be suppressed OP-85504 M12 Straight M12 Straight 5 (16.4’) Approx. 130 g
Receiver OP-85505 M12 Straight ― Loose wires 2 (6.6’) Approx. 75 g
which it is set. If the polarization direction Transmitter by alternating the positions Connector - loose wires
OP-85506 M12 Straight ― Loose wires 10 (32.8’) Approx. 320 g
of the filters attached to the transmitter of the transmitters and the Receiver PUR
Transmitter OP-85507 M12 Straight M12 Straight 2 (6.6’) Approx. 90 g
and the receiver is the same, the beam receivers. Be sure to pay Connector - connector
Receiver OP-85508 M12 Straight M12 Straight 5 (16.4’) Approx. 175 g
can be received. If the direction of the attention to the direction of
* One piece is included.
filter is changed by 90 degrees, however, the notches on the filters. Receiver
the beam cannot be received. Using this
Transmitter
restriction, interference can be Receiver
suppressed with polarization filters as
shown.
Receiver Transmitter
Input/output circuits
* Remove the protective sheets on both sides of the polarization filter before use.
* Adjust the sensitivity if interference occurs even with polarization filters.
Thrubeam transmitter NPN output (thrubeam receiver, reflective, retro-reflective)
PZ-G5*(C)PZ-G5*(C)B M8 connector PZ-G**(C)N
Brown (Pin 1) 2 4 Brown (Pin 1) M8 connector
DC10-30V DC10-30V
1 3
2 4
main circuit
main circuit
1 3
Sensor
protection circuit
Black (Pin 4)
Sensor
Reflectors NPN control output
Overcurrent
M12 connector
2
OP-84219 OP-96436 R-5 OP-84221 3 1
Blue (Pin 3) Blue (Pin 3)
0V 4 0V
PNP output (thrubeam receiver, reflective, retro-reflective) Bipolar output (thrubeam receiver, reflective, retro-reflective)
PZ-G**(C)P PZ-G**(C)B
Brown (Pin 1) M8 connector Brown (Pin 1) M12 connector
Detecting distance (m ft) DC10-30V DC10-30V
Number 2 4 2
Model For use with: Description Material Weight
main circuit
main circuit
protection circuit
PZ-G61 PZ-G62 included 3 1
1 3 Black (Pin 4)
Overcurrent
protection circuit
Sensor
Long-range Transparent object detection
Sensor
8 9
Characteristics
Receiver excess gain vs. detecting distance (Typical) Optical axis angle (Typical)
Transmitter Transmitter Transmitter Transmitter
PZ-G51 PZ-G52 PZ-G41 PZ-G42 PZ-G51(Lateral) Receiver PZ-G51(Longitudal) Receiver PZ-G52(Lateral) Receiver PZ-G52(Longitudal) Receiver
1000 1000 1000 1000 25 82.0’ 25 82.0’ 45 147.6’ 45 147.6’
Receiver Receiver Transmitter Receiver Transmitter Receiver Receiver Receiver
θ° θ° 40 131.2’ Transmitter Receiver 131.2’
θ°
θ° 40 θ°
X X 20 65.6’ 20 65.6’ 35 X 114.8’ 35 114.8’
Distance X (m / ft)
Distance X (m / ft)
Distance X (m / ft)
Distance X (m / ft)
X X X X X
X X
100 100 100
Excess gain
Excess gain
Excess gain
Excess gain
100 X 30 98.4’ 30 98.4’
15 49.2’ 15 49.2’ θ°
25 Transmitter Transmitter 82.0’ 25 Transmitter Receiver 82.0’
θ° θ°
Transmitter Transmitter 20 65.6’ 20 65.6’
10 32.8’ 10 32.8’
10 10 10 10 15 49.2’ 15 X 49.2’
5 16.4’ 5 16.4’ 10 32.8’ 10 32.8’
5 16.4’ 5 16.4’
1 1 1 1 0 0 0 0
0 5 10 15 20 25 0 10 20 30 40 50 0 0.5 1.0 1.5 2.0 2.5 3.0 0 100 200 300 400 500 600 700 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 -2 0 2 4 6 8 10
16.4’ 32.8’ 49.2’ 65.6’ 82.0’ 32.8’ 65.6’ 98.4’ 131.2’ 164’ 1.6’ 3.3’ 4.9’ 6.6’ 8.2’ 9.8’ 3.94" 7.87" 11.81" 15.75" 19.69" 23.26" 27.56" Operating angle (θ°
) Operating angle (θ° Operating angle (θ°
)
Operating angle (θ°
) )
Detecting distance (m / ft) Detecting distance (m / ft) Detecting distance (m / ft) Detecting distance (mm / inch)
R-2L
R-3 R-2L
R-5 R-3
PZ-G101 PZ-G102 PZ-G61 Reflective tape PZ-G62 R-5 PZ-G41 PZ-G42 PZ-G101 PZ-G102
1000 1000 100 10 1000 39.37" 300 11.81" 200 7.87" 50 1.97"
900 35.43" 180 7.09" 45 1.77"
Excess gain
100
Excess gain
Excess gain
100 X X
600 23.62" 120 4.72" 30 1.18"
10 500 19.69" 150 5.91" 100 3.94" 25 0.98"
400 15.75" 80 3.15" 20 0.79"
10 10 300 11.81" 100 3.94"
60 2.36" 15 0.59"
θ° X θ° X θ° X θ° X
200 7.87" 50 1.97" 40 1.58" 10 0.39"
100 3.94" 20 0.79" 5 0.20"
1 1 1 1 0 0 0 0
0 100 200 300 400 500 600 0 10 20 30 40 50 60 70 0 1 2 3 4 5 6 7 8 0 0.5 1.0 1.5 2.0 -80 -60 -40 -20 0 20 40 60 80 -80 -60 -40 -20 0 20 40 60 80 -80 -60 -40 -20 0 20 40 60 80 -80 -60 -40 -20 0 20 40 60 80
3.94" 7.87" 11.81" 15.75" 19.69" 27.56" 0.39" 0.79" 1.18" 1.58" 1.97" 2.36" 2.76" 3.3’ 6.6’ 9.8’ 13.1’ 16.4’ 19.7’ 23.0’ 26.3’ 1.6’ 3.3’ 4.9’ 6.6’ Operating angle (θ°
) Operating angle (θ°
) Operating angle (θ°
Operating angle (θ°
) )
Detecting distance (mm / inch) Detecting distance (mm / inch) Detecting distance (m / ft) Detecting distance (m / ft)
Distance Y (m / ft)
Distance X (m / ft)
Distance X (m / ft)
3.0 9.8’
Distance X (m / ft)
Distance X (m / ft)
1.0 3.3’ 25 0.98" X X
60 2.36" 0.8 2.6’ 0.8 2.6’
2.5 8.2’ 3 9.8’ 3 9.8’
0.8 2.6’ 50 1.97" 20 0.79"
2.0 6.6’ 0.6 2.0’ 0.6 2.0’
0.6 2.0’ 40 White 1.58" 15 White 0.59"
Y 1.5 Y 4.9’ 2 6.6’ 2 6.6’
30 Y mat 1.18" Y mat 0.4 1.3’ 0.4 1.3’
0.4 1.3’ paper 10 paper 0.39"
X
1.0 X
3.3’ 20 Y 0.79" Y
1 3.3’ 1 3.3’ 0.2 0.7’ 0.2 0.7’
0.2 0.7’ 0.5 1.6’ 10 Interference 0.39" 5 Interference 0.20"
Interference area Interference area X area X area
0 0.0 0 0 0 0 0 0
0 10 20 30 0 10 20 30 40 50 0 0.2 0.4 0.6 0.8 1.0 1.2 0 50 100 150 200 250 300 -5 -4 -3 -2 -1 0 1 2 3 4 5 -5 -4 -3 -2 -1 0 1 2 3 4 5 -6 -4 -2 0 2 4 6 -6 -4 -2 0 2 4 6
32.8’ 65.6’ 98.4’ 32.8’ 65.6’ 98.4’ 131.2’ 164’ 0.7’ 1.3’ 2.0’ 2.6’ 3.3’ 3.9’ 1.97" 3.94" 5.91" 7.87" 9.84" 11.81" Operating angle (θ°
) Operating angle (θ°
) Operating angle (θ°
) Operating angle (θ°
)
Distance X (m / ft) Distance X (m / ft) Distance X (m / ft) Distance X (mm / inch)
100 3.94"
1.5 4.9’
Distance Y (m / ft)
10 11
Characteristics
Receiver excess gain vs. detecting distance (Typical) Optical axis angle (Typical)
Transmitter Transmitter Transmitter Transmitter
PZ-G51 PZ-G52 PZ-G41 PZ-G42 PZ-G51(Lateral) Receiver PZ-G51(Longitudal) Receiver PZ-G52(Lateral) Receiver PZ-G52(Longitudal) Receiver
1000 1000 1000 1000 25 82.0’ 25 82.0’ 45 147.6’ 45 147.6’
Receiver Receiver Transmitter Receiver Transmitter Receiver Receiver Receiver
θ° θ° 40 131.2’ Transmitter Receiver 131.2’
θ°
θ° 40 θ°
X X 20 65.6’ 20 65.6’ 35 X 114.8’ 35 114.8’
Distance X (m / ft)
Distance X (m / ft)
Distance X (m / ft)
Distance X (m / ft)
X X X X X
X X
100 100 100
Excess gain
Excess gain
Excess gain
Excess gain
100 X 30 98.4’ 30 98.4’
15 49.2’ 15 49.2’ θ°
25 Transmitter Transmitter 82.0’ 25 Transmitter Receiver 82.0’
θ° θ°
Transmitter Transmitter 20 65.6’ 20 65.6’
10 32.8’ 10 32.8’
10 10 10 10 15 49.2’ 15 X 49.2’
5 16.4’ 5 16.4’ 10 32.8’ 10 32.8’
5 16.4’ 5 16.4’
1 1 1 1 0 0 0 0
0 5 10 15 20 25 0 10 20 30 40 50 0 0.5 1.0 1.5 2.0 2.5 3.0 0 100 200 300 400 500 600 700 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 -2 0 2 4 6 8 10 -10 -8 -6 -4 -2 0 2 4 6 8 10
16.4’ 32.8’ 49.2’ 65.6’ 82.0’ 32.8’ 65.6’ 98.4’ 131.2’ 164’ 1.6’ 3.3’ 4.9’ 6.6’ 8.2’ 9.8’ 3.94" 7.87" 11.81" 15.75" 19.69" 23.26" 27.56" Operating angle (θ°
) Operating angle (θ° Operating angle (θ°
)
Operating angle (θ°
) )
Detecting distance (m / ft) Detecting distance (m / ft) Detecting distance (m / ft) Detecting distance (mm / inch)
R-2L
R-3 R-2L
R-5 R-3
PZ-G101 PZ-G102 PZ-G61 Reflective tape PZ-G62 R-5 PZ-G41 PZ-G42 PZ-G101 PZ-G102
1000 1000 100 10 1000 39.37" 300 11.81" 200 7.87" 50 1.97"
900 35.43" 180 7.09" 45 1.77"
Excess gain
100
Excess gain
Excess gain
100 X X
600 23.62" 120 4.72" 30 1.18"
10 500 19.69" 150 5.91" 100 3.94" 25 0.98"
400 15.75" 80 3.15" 20 0.79"
10 10 300 11.81" 100 3.94"
60 2.36" 15 0.59"
θ° X θ° X θ° X θ° X
200 7.87" 50 1.97" 40 1.58" 10 0.39"
100 3.94" 20 0.79" 5 0.20"
1 1 1 1 0 0 0 0
0 100 200 300 400 500 600 0 10 20 30 40 50 60 70 0 1 2 3 4 5 6 7 8 0 0.5 1.0 1.5 2.0 -80 -60 -40 -20 0 20 40 60 80 -80 -60 -40 -20 0 20 40 60 80 -80 -60 -40 -20 0 20 40 60 80 -80 -60 -40 -20 0 20 40 60 80
3.94" 7.87" 11.81" 15.75" 19.69" 27.56" 0.39" 0.79" 1.18" 1.58" 1.97" 2.36" 2.76" 3.3’ 6.6’ 9.8’ 13.1’ 16.4’ 19.7’ 23.0’ 26.3’ 1.6’ 3.3’ 4.9’ 6.6’ Operating angle (θ°
) Operating angle (θ°
) Operating angle (θ°
Operating angle (θ°
) )
Detecting distance (mm / inch) Detecting distance (mm / inch) Detecting distance (m / ft) Detecting distance (m / ft)
Distance Y (m / ft)
Distance X (m / ft)
Distance X (m / ft)
3.0 9.8’
Distance X (m / ft)
Distance X (m / ft)
1.0 3.3’ 25 0.98" X X
60 2.36" 0.8 2.6’ 0.8 2.6’
2.5 8.2’ 3 9.8’ 3 9.8’
0.8 2.6’ 50 1.97" 20 0.79"
2.0 6.6’ 0.6 2.0’ 0.6 2.0’
0.6 2.0’ 40 White 1.58" 15 White 0.59"
Y 1.5 Y 4.9’ 2 6.6’ 2 6.6’
30 Y mat 1.18" Y mat 0.4 1.3’ 0.4 1.3’
0.4 1.3’ paper 10 paper 0.39"
X
1.0 X
3.3’ 20 Y 0.79" Y
1 3.3’ 1 3.3’ 0.2 0.7’ 0.2 0.7’
0.2 0.7’ 0.5 1.6’ 10 Interference 0.39" 5 Interference 0.20"
Interference area Interference area X area X area
0 0.0 0 0 0 0 0 0
0 10 20 30 0 10 20 30 40 50 0 0.2 0.4 0.6 0.8 1.0 1.2 0 50 100 150 200 250 300 -5 -4 -3 -2 -1 0 1 2 3 4 5 -5 -4 -3 -2 -1 0 1 2 3 4 5 -6 -4 -2 0 2 4 6 -6 -4 -2 0 2 4 6
32.8’ 65.6’ 98.4’ 32.8’ 65.6’ 98.4’ 131.2’ 164’ 0.7’ 1.3’ 2.0’ 2.6’ 3.3’ 3.9’ 1.97" 3.94" 5.91" 7.87" 9.84" 11.81" Operating angle (θ°
) Operating angle (θ°
) Operating angle (θ°
) Operating angle (θ°
)
Distance X (m / ft) Distance X (m / ft) Distance X (m / ft) Distance X (mm / inch)
100 3.94"
1.5 4.9’
Distance Y (m / ft)
10 11
Specifications Dimensions CAD Download www.keyence.com/cad
1m 300 mm
(3.3') (11.81") 0.1 to 4.2 m 0.1 to 1 m
20 m 40 m (When detecting (When detecting 200 mm 5 to 45 mm (0.3" to 13.8") (0.3" to 3.3")
Detecting distance (65.6') (131.2') 30 x 30 cm 10 x 10 cm (7.87") (0.20" to 1.77") (When R-2L (When R-2L
(11.81"x11.81") (3.94" x 3.94") reflector is reflector is
white paper) white paper) used) used)
Approx. 5 mm Approx. 2 mm
0.20" dia. 0.08" dia.
Spot diameter (At a detecting (At a detecting
distance of distance of
100 mm 3.94") 40 mm 1.57")
Light source Red LED Infrared LED x 2 Red LED Infrared LED
Sensitivity adjustment 1-turn trimmer (230˚)
Response time 500 µs
Operation mode LIGHT-ON/DARK-ON (switch-selectable)
Control output Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max.
Protection circuit Reversed polarity, overcurrent protection, surge absorber
Power supply 10 to 30 VDC including Ripple ±10% (P-P)
Rating T: 20 mA max. T: 25 mA max.
Current consumption 34 mA max.
R: 28 mA max. R: 28 mA max.
Enclosure rating IEC, IP67 / NEMA: 4x, 6, 12 / DIN: IP69K
Ambient light Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Environmental Ambient temperature -20 to 55˚C (-4 to 130˚F), No freezing
resistance Relative humidity 35 to 85%, No condensation
Vibration 10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively
2
Shock 1000 m/s 6 times in the X and Y directions
Up to 2 units
Interference suppression Up to 2 units
(When polarization filters
(with the automatic different frequency function)
are attached)
12 13
Specifications Dimensions CAD Download www.keyence.com/cad
1m 300 mm
(3.3') (11.81") 0.1 to 4.2 m 0.1 to 1 m
20 m 40 m (When detecting (When detecting 200 mm 5 to 45 mm (0.3" to 13.8") (0.3" to 3.3")
Detecting distance (65.6') (131.2') 30 x 30 cm 10 x 10 cm (7.87") (0.20" to 1.77") (When R-2L (When R-2L
(11.81"x11.81") (3.94" x 3.94") reflector is reflector is
white paper) white paper) used) used)
Approx. 5 mm Approx. 2 mm
0.20" dia. 0.08" dia.
Spot diameter (At a detecting (At a detecting
distance of distance of
100 mm 3.94") 40 mm 1.57")
Light source Red LED Infrared LED x 2 Red LED Infrared LED
Sensitivity adjustment 1-turn trimmer (230˚)
Response time 500 µs
Operation mode LIGHT-ON/DARK-ON (switch-selectable)
Control output Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max.
Protection circuit Reversed polarity, overcurrent protection, surge absorber
Power supply 10 to 30 VDC including Ripple ±10% (P-P)
Rating T: 20 mA max. T: 25 mA max.
Current consumption 34 mA max.
R: 28 mA max. R: 28 mA max.
Enclosure rating IEC, IP67 / NEMA: 4x, 6, 12 / DIN: IP69K
Ambient light Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Environmental Ambient temperature -20 to 55˚C (-4 to 130˚F), No freezing
resistance Relative humidity 35 to 85%, No condensation
Vibration 10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively
2
Shock 1000 m/s 6 times in the X and Y directions
Up to 2 units
Interference suppression Up to 2 units
(When polarization filters
(with the automatic different frequency function)
are attached)
12 13
Dimensions CAD Download www.keyence.com/cad
14 15
Dimensions CAD Download www.keyence.com/cad
14 15
Dimensions CAD Download www.keyence.com/cad
16 17
Dimensions CAD Download www.keyence.com/cad
16 17
Dimensions CAD Download www.keyence.com/cad MEMO
18 19
MEMO
19
Background Suppression Model Unaffected by Color!
One-touch
Fully-automatic calibration
Here’s How
PSD (Position-Sensitive Detector) A.P.R. circuit (Automatic Power Reinforcement)
The target distance is detected according to the angle of Stable detection is possible due to the A.P.R. circuit
the reflected light beam. which automatically adjusts the amount of light emitted
• Unaffected by a highly reflective target background according to the color and angle of the target.
• Stable detection of targets with colors and materials of
varying reflectance
• Highly accurate detection of minute objects
OFF
ON
ON OFF