Professional Documents
Culture Documents
Adhesive PDS & MSDS PDF
Adhesive PDS & MSDS PDF
(CIN – U24290DL2012PTC 238505)
TECHNICAL DATA SHEET
CRAY FORD 81-10
Type Synthetic Rubber Based Adhesive
Recommended Use CRAY FORD 81–10 highly recommended in applications where fibrous
glass and other type of insulation are bonded to the interior or exterior of
metal duct system.
Fire Resistant
Chemical Resistant
Non Toxic
UV Resistant
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
SSPL Polymers Pvt.Ltd.
(CIN – U24290DL2012PTC 238505)
Specification
Other Data*
UV Resistivity Excellent
Surface Preparation The surface should be structurally sound, clean, dry, leveled and
free from dust curing compounds grease and other loose debris
according to BS 8203
Application Procedure Apply CRAY FORD 81–10 with brush, roller or pressure feeding
equipment evenly on both surfaces, wait until solvent is fully
evaporated. After the evaporation of solvent in adhesive,
assemble the surface by applying normal hand pressure.
In case of fibrous wool, apply CHEMXGLUE HG 81-10 evenly by
brush, roller or any suitable equipment over the GI sheet and
wait for 5 to10 minutes before bonding the glass wool.
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
SSPL Polymers Pvt.Ltd.
(CIN – U24290DL2012PTC 238505)
unopened
Health & Safety As with all chemicals, caution should always be exercised.
This Information and our technical advice - whether verbal, in writing or by way of trials - are given in
good faith but without warranty, and this also applies where proprietary rights of third parties are involved.
Our advice does not release you from the obligation to verify the information currently provided -
especially that contained in our safety data and technical information sheets - and to test our products as
to their suitability for the intended processes and uses. The application, use and processing of our
products and the products manufactured by you on the basis of our technical advice are beyond our
control and, therefore, entirely your own responsibility.
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
SSPL Polymers Pvt.Ltd.
(CIN – U24290DL2012PTC 238505)
TECHNICAL DATA SHEET
CRAY COAT 30-36
Type HVAC Duct Insulation Coating
Description CRAY COAT 30-36 is a commercial water based coating for Duct
Insulation. It is washable, tough, and abrasion resistant. Its acts as
lagging & lap adhesive for canvas and glass reinforcing cloth. Due to its
excellent brushing characteristic it provides excellent brushing
characteristics
Recommended Use It is used for outdoors as well as indoors thermal insulation material on
metal duct, in areas where with high humidity and elevated temperature
are major problems. It may be applied to the joints or edges of fibrous
duct liner insulation to seal and prevent air erosion.
UV Resistant
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
SSPL Polymers Pvt.Ltd.
(CIN – U24290DL2012PTC 238505)
Specification
Other Data*
UV Resistivity Excellent
Surface Preparation The surface should be structurally sound, clean, dry, leveled and
free from dust curing compounds grease and other loose debris
according to BS 8203
Application Procedure Apply a tack coat of CRAY COAT 30-36 @ 3 to 3.5 m2/ liter.
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
SSPL Polymers Pvt.Ltd.
(CIN – U24290DL2012PTC 238505)
Special Note:
It is very important to ensure that each coat of CRAY COAT 30-
36 is totally cured before the next coat is applied. The dry film
thickness will vary with fabric selected.
Cleaning Clean with warm water and soap when wet. Mineral spirit, when
dry.
Health & Safety As with all chemicals, caution should always be exercised.
This Information and our technical advice - whether verbal, in writing or by way of trials - are given in
good faith but without warranty, and this also applies where proprietary rights of third parties are involved.
Our advice does not release you from the obligation to verify the information currently provided -
especially that contained in our safety data and technical information sheets - and to test our products as
to their suitability for the intended processes and uses. The application, use and processing of our
products and the products manufactured by you on the basis of our technical advice are beyond our
control and, therefore, entirely your own responsibility.
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
SSPL Polymers Pvt.Ltd.
(CIN – U24290DL2012PTC 238505)
TECHNICAL DATA SHEET
CRAY COAT 30-36 AF
Type HVAC Antifungal Duct Insulation Coating
Recommended Use It is used for outdoors as well as indoors thermal insulation material on
metal duct, in areas where with high humidity and elevated temperature
are major problems. It is specially designed to prevent fungus, mold and
mildew growth on the duct system.It is used a lag adhesive where fungi
resistance is required
UV Resistant
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
SSPL Polymers Pvt.Ltd.
(CIN – U24290DL2012PTC 238505)
Specification
Other Data*
UV Resistivity Excellent
Surface Preparation The surface should be structurally sound, clean, dry, leveled and
free from dust curing compounds grease and other loose debris
according to BS 8203
Application Procedure Apply a tack coat of CRAY COAT 30-36 AF @ 3 to 3.5 m2/ liter.
Cleaning Clean with warm water and soap when wet. Mineral spirit, when
dry.
Health & Safety As with all chemicals, caution should always be exercised.
This Information and our technical advice - whether verbal, in writing or by way of trials - are given in
good faith but without warranty, and this also applies where proprietary rights of third parties are involved.
Our advice does not release you from the obligation to verify the information currently provided -
especially that contained in our safety data and technical information sheets - and to test our products as
to their suitability for the intended processes and uses. The application, use and processing of our
products and the products manufactured by you on the basis of our technical advice are beyond our
control and, therefore, entirely your own responsibility.
Registered Office: C‐34A, First Floor, Hari Nagar, Clock Tower, New Delhi‐110065
Work: Survey No. 115/1, Daman Indl. Estate Village Kadaiya, Nani Daman, Daman‐396210.
Tel: 0260 – 2221251, Fax: 0260 – 2221786, Email ID: info@ssplpolymers.com, Web: www.ssplpolymers.com
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYCOAT 30‐36 AF
Product Code : WB006
Revised on: 27.09.2012 Version: 27.09.2012
1. Identification of the substance / preparation and of the company / undertaking
Product name
CRAYCOAT 30-36 AF
Use of the substance / preparation
HVAC Antifungal Duct Insulation Coating
Manufacturer / supplier SSPL Polymers PVT LTD
115/1 Daman Industrial Estate ,Kadaiya,Nani Daman‐396210
Tel.: 0260‐2221251 Fax.: 0260‐2221786
Information on material safety data Tel.: 0260‐2221251 Fax.: 0260‐2221786
sheet info@ssplpolymers.com
Emergency information Advice Centre for Poison Symptoms and Embryo Toxicology (Emergency Phone
Line) Tel.: 0260‐2221251, info@ssplpolymers.com
2. Hazards identification
Other hazards Indication of hazard not applicable
3. Composition / information on ingredients
Polymer CAS No. : 25085‐34‐1
Filler CAS No. : 471‐34‐1
Pigment CAS No. : 13463‐67‐7
4. First aid measures
After skin contact Wash off with plenty of water and soap immediately.
After eye contact In case of contact with the eyes, rinse immediately with plenty of water,
and seek immediate medical attention.
After ingestion Do not induce vomiting, seek medical advice immediately.
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYCOAT 30‐36 AF
Product Code : WB006
Revised on: 27.09.2012 Version: 27.09.2012
5. Fire fighting measures
Suitable extinguishing media ( in
Use water spray, foam, dry chemical or carbon dioxide.
case of fire )
Auto ignition temperature Not available
Flammable/Explosive limits‐lower Not available
Flammable/Explosives limits‐upper Not available
Special fire fighting procedure Person exposed to combustion should wear self‐contained breathing apparatus
and full protective equipment.
6. Accidental release measures
Environmental precautions Prevent product from entering drains.
Product precipitate may cause clogging.
Clean up Take up mechanically or non‐combustible absorbent material.
Transfer into suitable container.
To be disposed of in compliance with existing regulations.
7. Handling and storage
Handling Avoid contact with skin and eyes.
Application, processing: provide good ventilation and extraction.
Wash thoroughly after handling.
Keep the container closed.
Storage Store in a cool, dry and ventilation location.
Keep container closed.
8. Exposure controls / personal protection
Control parameters
Engineering measures
In product processing: Provide good ventilation or extraction.
Additional information about None
Engineering measures
9. Physical and chemical properties
Form Thixotropic
Colour White
Odour faint
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYCOAT 30‐36 AF
Product Code : WB006
Revised on: 27.09.2012 Version: 27.09.2012
Melting point/melting range Not applicable
Boiling temperature/boiling range Not applicable
Flash Point >100◦C
Ignition Temperature Not applicable
pH 8
Odour Threshold Not applicable
Specific Gravity 1.40±0.10 k/l
Solid % 65±5 %
Other Information None
10.Stability and reactivity
Stability Stable under normal conditions
Chemical Incompatibility Strong oxidizing agents
Hazardous Polymerization Will not occur
Hazardous Decomposition Products Decomposition of dry substances at consistently high temperatures.
11. Toxicological information
Skin irritation Rabbit; not irritating
Other Components Not applicable
12. Ecological information
Persistence and degradability Physical‐chemical removability.
13. Disposal considerations
Please note: as per local municipal law or any other concerned authority.
14. Transport information
Non DGR can be transported by any means of transportation.
15. Regulatory information
Labelling according to EC Directives Statutory basis/list. Not subject to labelling provisions according to the dangeroaus
Preparation Directive ( 1999/45/EG).
16. other information
Further information 02.2 GHS – precautionary statements. 03. Hazardous components. 08.1 control
Relevant changes parameters
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYCOAT 30‐36 AF
Product Code : WB006
Revised on: 27.09.2012 Version: 27.09.2012
Department issuing data sheet Laboratory
MATERIAL SAFETY DATA SHEET
COMPANY DETAILS
VAPOR PRESSURE: ND
SPECIFIC GRAVITY: 1.6
EVAPORATION RATE (BuAc=1): >1
SOLUBILITY IN WATER: miscible
VOC: 0%
pH: <8
APPEARANCE: White/Gray Viscous paste
FLASH POINT: Not applicable water based.
HAZARDS IDENTIFICATIONS
EMERGENCY OVERVIEW: Safe water based product. Avoid contact with skin or eyes. Harmful if inhaled or
swallowed.
POTENTIAL HEALTH EFFECTS:
INHALATION: Inhalation of vapor or mist should be avoided. Symptoms include coughing, wheezing, laryngitis,
and shortness of breath, headache, nausea, and vomiting.
EYE CONTACT: Contact of material with eye should be avoided.
SKIN CONTACT: This material is non-corrosive to all body tissues.
INGESTION: causes nausea, vomiting, and loss of consciousness.
FIRST AID MEASURES
INHALATION: Move victim to fresh air and, if needed, immediately begin artificial respiration. Give oxygen if
breathing is labored. Get emergency medical help. Contact a physician immediately.
FOCUS AIR CONDITIONING INDUSTRIES LLC / P.O.37945/ DUBAI / UNITED ARAB EMIRATES
MATERIAL SAFETY DATA SHEET
EYE CONTACT: Flush eyes with water for 15 minutes. Get medical attention.
SKIN CONTACT: Flush with water or soap and water for 15 minutes or until all traces have been removed. Seek
medical attention if symptoms develop and persist.
INGESTION: Do not induce vomiting. Rinse mouth out with water. Get immediate medical attention.
HANDLING: Avoid contact with skin, eyes, and clothing. After handling this product, wash hands before eating,
drinking or smoking. If contact occurs, remove contaminated clothing. If needed, take first aid action shown in
section IV. Launder contaminated clothing before reuse.
STORAGE: Store away from foodstuffs,
TOXICOLOGICAL INFORMATION
TRANSPORTATION INFORMATION
FOCUS AIR CONDITIONING INDUSTRIES LLC / P.O.37945/ DUBAI / UNITED ARAB EMIRATES
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYFORD 81–10
Product Code : SB015
Revised on: 06.07.2014 Version: 06.07.2014
1. Identification of the substance / preparation and of the company / undertaking
Product name CRAYFORD 81–10
Use of the substance / preparation Synthetic Rubber Based Adhesive
Manufacturer / supplier SSPL Polymers PVT LTD
115/1 Daman Industrial Estate ,Kadaiya,Nani Daman‐396210
Tel.: 0260‐2221251 Fax.: 0260‐2221786
Information on material safety data Tel.: 0260‐2221251 Fax.: 0260‐2221786
sheet info@ssplpolymers.com
Emergency information Advice Centre for Poison Symptoms and Embryo Toxicology (Emergency Phone
Line) Tel.: +0260‐2221251, info@ssplpolymers.com
2. Hazards identification
Classification of the substance or mixture Highly flammable
(Directive 67/548/EEC or 1999/45/EC) F; Xi; N
Emergency overview Irritating to eye and skin. Moderate respiratory tract irritant. Harmful if
swallowed.
Label elements
(Directive 67/548/EEC or 1999/45/EC)
F ; Highly flammable
Danger symbol and danger designation
Xi ; Irritant
N ; Dangerous for the environment
Other hazards None
Additional information HMIS Rating:
‐ Health – 2
‐ Flammability – 4
‐ Reactivity – 0
3. Composition / information on ingredients
Mixtures
Hazardous components
RUBBER CAS‐No.: 9003‐55‐8
RESIN CAS‐No.: 64742‐16‐1
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYFORD 81–10
Product Code : SB015
Revised on: 06.07.2014 Version: 06.07.2014
N‐HEXANE CAS‐No.: 110‐54‐3
ETHYL ACETATE CAS‐No.: 141‐78‐6
ACETONE CAS‐No.: 67‐64‐1
OTHER SOLVENTS CAS‐No.: 1330‐20‐7
4. First aid measures
After inhalation If inhaled, immediately take the affected person to fresh air. Give sufficient
oxygen. If not breathing, give artificial respiration. Get medical attention, if
symptoms develop.
After skin contact Rinse with running water and soap. Remove all contaminated clothing.
In case of contact with the eyes, rinse immediately with plenty of water, and
After eye contact
seek immediate medical attention.
After ingestion
Do not induce vomiting, seek medical advice immediately.
Most important symptoms and effects, None
both acute and delayed
Indication of any immediate medical None
attention and special treatment needed
5. Fire fighting measures
Suitable extinguishing media Use water spray, foam, dry chemical or carbon dioxide.
Auto ignition temperature Not available
Flammable/Explosive limits‐lower Not available
Flammable/Explosives limits‐upper Not available
Special fire fighting procedure Person exposed to combustion should wear self‐contained breathing apparatus
and full protective equipment.
Unusual fire or explosion hazards Closed containers may explode when exposed to extreme heat. Vapours may
form explosive mixtures with air. Vapours are heavier than air and may travel
along floor to an ignition source.
Hazards combustion products Carbon dioxide. Carbon monoxide
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYFORD 81–10
Product Code : SB015
Revised on: 06.07.2014 Version: 06.07.2014
6. Accidental release measures
Special protection Exposure to the spilled material may irritating or harmful. Follow personal
protective equipment. Additional precautions may be necessary based on special
circumstances created by the spill including; the material spilled, the quantity of
the spill, the area in which the spill occurred. Evaporation of volatile substances
can lead to the displacement of air creating an environment that can cause
asphyxiation.
Clean up Dike if necessary, contain spill with inert absorbent and transfer to containers for disposal.
Keep spilled product out of sewers, watersheds or water systems. Shut off ignition sources,
including electrical equipment and flames. Do not allow smoking in the area.
7. Handling and storage
Handling Avoid contact with skin and eyes.
Application, processing: provide good ventilation and extraction.
Keep away from heat, sparks and flame.
Wash thoroughly after handling.
Keep the container closed.
Do not cut or weld on or near this container.
Storage Store in a cool, dry and ventilation location. Keep away from heat, sparks, flame and other
source of ignition. Keep container closed.
8. Exposure controls / personal protection
Control parameters
N‐HEXANE Specification : ACGIH exposure limit
Value: 50ppm TWA
Specification : OSHA
Value: 500 ppm TWA, 1800 mg/m3 TWA
Specification: ACGIH exposure limit
Solvents Value: 54ppm TWA
(CAS‐No.: 141‐78‐6) Specification: OSHA
Value: 635 ppm TWA, NA
Personal Protective equipment
Gloves Nitrile
Respiratory protection Respiratory protection may be required to avoid over exposure when handling thins
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYFORD 81–10
Product Code : SB015
Revised on: 06.07.2014 Version: 06.07.2014
product. Use a respirator if general room ventilation in not available or sufficient to
eliminate symptoms. NIOSH approved air purifying respirator with organic vapour
cartridge. Respirators should be selected by and used following requirement found in
OSHA’s respirator standard (29 CFR 1910.134).
Eye protection Wear safety glasses when handling this product.
Skin protection Avoid skin contact by wearing chemically resistant gloves. Skin absorption may potentially
contribute to the overall exposure to this material. Appropriate measures should be taken
to prevent absorption so that the TVL is not invalidated.
Ventilation Use local exhaust ventilation or other engineering controls to minimize exposures.
Additional information about None
Engineering measures
9. Physical and chemical properties
Form Liquid
Colour Green colour
Odour Solvent
Melting point/melting range Not applicable
Boiling temperature/boiling range Not applicable
Flash Point Below 21 ⁰C
Ignition Temperature Not applicable
pH Not applicable
Odour Threshold Not applicable
Specific Gravity 0.85 ± 0.10
Solid % 23 ± 2 %
Other Information None
10.Stability and reactivity
Stability Stable under normal conditions
Chemical Incompatibility Strong oxidizing agents
Hazardous Polymerization Will not occur
Hazardous Decomposition Products Carbon monoxide, carbon dioxide chlorine containing gases
11. Toxicological information
Component LD 50/LC 50
Hexane Oral LD 50, Rat = 28710 mg/kg
Inhalation LC 50 Rat = 48000ppm
Other Components Not applicable
12. Ecological information
Persistence and degradability Physical‐chemical removability.
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYFORD 81–10
Product Code : SB015
Revised on: 06.07.2014 Version: 06.07.2014
13. Disposal considerations
Please note: as per local municipal law or any other concerned authority.
14. Transport information
UN number 1133
UN proper shipping name IMO/IMDG‐Code: ADHESIVES
ICAO/IATA: ADHESIVES
Transport hazard class (es)
IMDG‐Code Class : 3
ICAO/IATA Class : 3
Packing group II
Environmental hazards None
Special precautions for user The shipping classifications in this section are for nun‐bulk packaging only (unless
otherwise specified). Shipping classification may be different for bulk packaging.
15. Regulatory information
Safety, health and environmental
regulations/legislation specific for the substance
or mixture
National regulatory information National regulations must be observed.
Emission control act (‘’TA‐Luft”) Weight fraction (number 5.2.5. l) : < 1 %
Water pollution classification Class : 2 classification according to VwVwS
Other regulations Please consider possible restrictions of occupation after maternity protection guideline
regulation or law for the protection of young workers
Information to classification: according to test results of used raw materials R 51/53 is
International regulatory information assigned.
Chemical safety assessment There are no data available on the product itself
16. other information
Further information
Relevant changes 02.2 GHS – precautionary statements. 03. Hazardous components. 08.1 control
parameters
R‐Phrases of components 11 Highly flammable
36 Irritating to eyes
36/37/38 Irritating to eyes, respiratory system and skin
36/38 Irritating to eyes and skin
38 Irritating to skin
50/53 very toxic to aquatic organisms, may cause long‐term adverse effects in
the aquatic envi the aquatic environment
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product Name: CRAYFORD 81–10
Product Code : SB015
Revised on: 06.07.2014 Version: 06.07.2014
51/53 Toxic to aquatic organisms, may cause long‐term adverse effects in the
R‐Phrases of components aquatic envi the aquatic environment
65 Harmful: may cause lung damage if swallowed
66 Repeated exposure may cause skin dryness or cracking
GHS Hazard statements of components H225 Highly flammable liquid and vapour
H290 May be corrosive to metals
H304 May be fatal if swallowed and enters airways
H314 Causes severe skin burns and eye damage
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H336 May cause drowsiness or dizziness
H400 Very toxic to aquatic life
H410 Very toxic to aquatic life with long lasting effects
H411 Toxic to aquatic life with long lasting effects
Department issuing data sheet Laboratory
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product name: CRAYCOAT 30‐36
Product Code : WB005
Revised on: 27.09.2012 Version: 27.09.2012
1. Identification of the substance / preparation and of the company / undertaking
Product name
CRAYCOAT 30-36
Use of the substance / preparation
HVAC Duct Insulation coating
Manufacturer / supplier SSPL Polymers PVT LTD
115/1 Daman Industrial Estate ,Kadaiya,Nani Daman‐396210
Tel.: 0260‐2221251 Fax.: 0260‐2221786
Information on material safety data Tel.: 0260‐2221251 Fax.: 0260‐2221786
sheet info@ssplpolymers.com
Emergency information Advice Centre for Poison Symptoms and Embryo Toxicology (Emergency Phone
Line) Tel.: 0260‐2221251, info@ssplpolymers.com
2. Hazards identification
Other hazards Indication of hazard not applicable
3. Composition / information on ingredients
Polymer CAS No. : 25085‐34‐1
Filler CAS No. : 471‐34‐1
Pigment CAS No. : 13463‐67‐7
4. First aid measures
After skin contact Wash off with plenty of water and soap immediately.
After eye contact In case of contact with the eyes, rinse immediately with plenty of water,
and seek immediate medical attention.
After ingestion Do not induce vomiting, seek medical advice immediately.
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product name: CRAYCOAT 30‐36
Product Code : WB005
Revised on: 27.09.2012 Version: 27.09.2012
5. Fire fighting measures
Suitable extinguishing media ( in
Use water spray, foam, dry chemical or carbon dioxide.
case of fire )
Auto ignition temperature Not available
Flammable/Explosive limits‐lower Not available
Flammable/Explosives limits‐upper Not available
Special fire fighting procedure Person exposed to combustion should wear self‐contained breathing apparatus
and full protective equipment.
6. Accidental release measures
Environmental precautions Prevent product from entering drains.
Product precipitate may cause clogging.
Clean up Take up mechanically or non‐combustible absorbent material.
Transfer into suitable container.
To be disposed of in compliance with existing regulations.
7. Handling and storage
Handling Avoid contact with skin and eyes.
Application, processing: provide good ventilation and extraction.
Wash thoroughly after handling.
Keep the container closed.
Storage Store in a cool, dry and ventilation location.
Keep container closed.
8. Exposure controls / personal protection
Control parameters
Engineering measures
In product processing: Provide good ventilation or extraction.
Additional information about None
Engineering measures
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product name: CRAYCOAT 30‐36
Product Code : WB005
Revised on: 27.09.2012 Version: 27.09.2012
9. Physical and chemical properties
Form Thixotropic
Colour White
Odour faint
Melting point/melting range Not applicable
Boiling temperature/boiling range Not applicable
Flash Point >100◦C
Ignition Temperature Not applicable
pH 8
Odour Threshold Not applicable
Specific Gravity 1.40±0.10 k/l
Solid % 62±3 %
Other Information None
10.Stability and reactivity
Stability Stable under normal conditions
Chemical Incompatibility Strong oxidizing agents
Hazardous Polymerization Will not occur
Hazardous Decomposition Products Decomposition of dry substances at consistently high temperatures.
11. Toxicological information
Skin irritation Rabbit; not irritating
Other Components Not applicable
12. Ecological information
Persistence and degradability Physical‐chemical removability.
13. Disposal considerations
Please note: as per local municipal law or any other concerned authority.
14. Transport information
Non DGR can be transported by any means of transportation.
15. Regulatory information
Labelling according to EC Directives Statutory basis/list. Not subject to labelling provisions according to the dangeroaus
Preparation Directive ( 1999/45/EG).
Material Safety Data Sheet
SAFETY DATA SHEET
According to (EC) 1907/2006
Product name: CRAYCOAT 30‐36
Product Code : WB005
Revised on: 27.09.2012 Version: 27.09.2012
16. other information
Further information 02.2 GHS – precautionary statements. 03. Hazardous components. 08.1 control
Relevant changes parameters
Department issuing data sheet Laboratory