Professional Documents
Culture Documents
Admin Office: 313, Bawa Tower, Sector 17, Vashi, Navi Mumbai 400703
Tele- 91-22-27880915/16, 7303545041
Email- tandyinnovative@gmail.com
www.tandyinnovative.com
TANDY 4301
HCFC FREE
PRODUCT DESCRIPTION
PROCESSING
Tandy 4301 can be processed both on high and low pressure machines and can be processed
manually.
PHYSICAL PROPERTIES
Appearance Brownish
Viscosity @ 21°C 450 +/100
ASTM C 518/
K Value @23 °C W/ m K <0.024 ASTM C 177
The materials are sensitive to humidity. Unused and partially used drums should be tightly sealed
and stored in shade area. The shelf life of Polyol is six months from the date of manufacture.
Flammability
This formulation contains certain percentage of flammable ingredients. As these are dissolved in
polyol they do not pose any major fire risk. However on prolong storage these gases may get
separated and may saturate over the top space in storage container. Hence it is essential to mix the
content before opening the container. If supplied in drums the drums are to be adequately rolled
before opening it. It is advised to allow a gap of about two hour after rolling the drums and
opening of the drum.
Standard practices of handling petroleum products to be adopted.
The working area should have flame proof fittings and should be well ventilated.
The drums should be stored under a covered segregated area.
The storage of finished polyurethane products should be separated from working area. The drums
should not be kept open when not in use.
Adequate numbers of fire extinguishers should be provided at the working areas as well as
storage areas preferably flame proof doors should be installed segregating production area, raw
material store, finished product store and office.