Professional Documents
Culture Documents
1 29
12 10
2 25
13 8
3 14 9 11
21
20 19
23 15 18 27 26
16
24 5 22
17 7 6 4
DC-N3
PRO/ DC-N3T/ 1. Power On
2. Patient Input
16. Clear
17. Cursor
3. Probe (Choose probe and exam) 18. Multi-function Knob
4. Freeze 19. Caliper
DC-N3S/ DC-N3 5. Trackball 20. Measurement
6. Set 21. Update (Shift exam status)
7. Back 22. Save (Frame or cine)
Quick Guide 8. 2B/ 4B Mode select 23. Review
9. Depth 24. Report
10. iTouch (Auto image optimization) 25. End Exam
11. Zoom 26. Print
12. Function Key 27. User-defined key
13. Image Mode & Gain Adjustment 28. iStation (Patient management)
14. Comment 29. Preset
15. Body mark
1 Click [Contrast] after obtaining high‐quality B mode image.
1. Getting Started 2 Inject the contrast agent; start up the timer.
3 Press [Update] to start image acquiring; press [Freeze] to finish image acquiring.
New Patient Elasto Imaging
1. Press [Patient], fill in basic patient information. 1. Scan lesions in B mode while being connected to linear probe. Click [Elasto]. Adjust ROI according to
2. Press [Probe]. lesions size.
3. Use the [Trackball] to choose probe and exam mode. 2. Press the probe according to the experiences and actual situation
2. Scanning 3. Measurement
B Mode Press [Freeze], and then use the [Trackball] to select an image.
1. Press [B] to enter into B mode. Caliper (General Measurement)
2. Rotate [B] knob to adjust gain.
1. Freeze the image; press [Caliper] to enter.
CDFI/Power Mode 2. Move the cursor onto the measurement tool and press [Set].
1. Under B mode, press [Color] to enter into color mode. 3. Move the cursor to the desired position and press [Set].
2. Move [Trackball], change the position of ROI, color blood flow will be displayed. Measure (Application Measurement)
3. Press [Set], move [Trackball] to change the size of ROI, press [Set].
1. Press [Measure] to enter the application measurement status.
PW/CW Mode 2. Move the cursor to choose the measurement tool, and then go to the desired position to measure.
1. Under color mode, press [PW] to enter PW mode.
2. Move [Trackball] to change the position of sample volume. 4. Post Scanning
3. Press [Set], use the soft key to change the size and angle of sample volume, press [Update] or [PW]
to get the pulse wave Doppler. Comments and Body Marks
Image Adjustment Comment
1. Press [Text], set the comment setting position and add the comment to the image.
2. Or press [F12] (Arrow) to add the arrow on the image.
Body Mark
1. Press [Body Mark] and rotate [Multi‐function Knob] to choose the desired one.
2. Use [Trackball] to place the probe marker, rotate [Multi‐function Knob] to adjust the orientation.
[Function Key] is corresponding to the soft menu. Use left/right keys to switch the modes, use the Save Images or Cine
up/down keys to choose parameters and turn pages up or down. 1. Press the user‐defined key to save a single‐frame image or cine to the system.
Special Imaging Mode (Optional) 2. Press [Review] or select an exam of a patient in the [iStation] screen, and click [Review].
3D/ 4D Report and Print
1. Select the 4D probe and choose the exam mode. Press [F9] (3D/4D) to enter. 1. Press [Report], move the cursor to the comments text box and type into the text.
2. Adjust the ROI and curve VOI. 2. Click [Image] in the report page to add images, click [Print Review] to review, click [Print] to print.
3. Click [Start] or press [Update] to enter the 4D image real‐time status. End Exam
iScape (Panoramic Imaging) Press [End Exam] to end. You may start a new exam by repeating the above instructions.
1. Make sure that there is enough coupling gel along the scan path. Click [iScape] in the soft menu in B
mode or press the user‐defined key on the control panel. 5. Image Management
2. Click [Start Capture] or press [Update] on the control panel to begin the acquisition. The system
enters image viewing status when the acquisition is completed. Image Transfer
3. Press [Esc] to return to iScape preparation or press [B] button to return to B mode. 1. Enter [iStation] to choose the images. 2. Click [Send to] to send the images to USB, MedSight or
Contrast Imaging
DICOM, etc. NOTE: For detailed information, please refer to the operation manual.
P/N: 046‐003957‐01 (V2.0)