Professional Documents
Culture Documents
3. Remove the components in the order indicated in the following illustration(s) and table(s).
Item Part Number Description
1 - Mass air flow (MAF) sensor electrical connector
2 - Air cleaner quick release retainer
See Removal Detail
3 - Air cleaner
See Installation Detail
4. To install, reverse the removal procedure.
NOTE:Make sure that the inside of the air cleaner outlet hose is clean and free from any oil residue, as this will reduce the installation grip of the
hose to the air cleaner and intake manifold.
NOTE:Make sure the PCV hose and quick release coupling are clean and free from any oil residue.
Removal Details
1. Detach the air cleaner quick release retainer from the air cleaner.
Installation Details
Item 3 : Air cleaner
NOTE:Make sure the two locating pegs on the air cleaner are located into the rubber grommets on the support bracket.
http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1110&proc-uid=G295770&gui... 14.04.2009