Professional Documents
Culture Documents
303-12 Intake Air Distribution and Filtering - 2.3L EcoBoost (201kW/273PS) 2019 Ranger
Removal and Installation Procedure revision date: 10/11/2018
Removal
NOTE: The turbocharger compressor vanes can be damaged by even the smallest particles. When removing any
turbocharger or engine air intake system component, ensure that no debris enters the system. Failure to do so
may result in damage to the turbocharger.
1.
1. Detach the clip.
2. Disconnect the quick release coupling and position aside the vacuum line.
Refer to: Quick Release Coupling (310-00 Fuel System - General Information - 2.3L EcoBoost
(201kW/273PS), General Procedures).
3. Loosen the clamps and remove the air cleaner outlet pipe.
Torque: 42 lb.in (4.8 Nm)
Installation
1. Inspect the turbocharger or engine air intake system components and clean, if necessary.
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019
Page 2 of 2
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019