Professional Documents
Culture Documents
Removal
4.
l Loosen the clamps and position aside the differential pressure feedback sensor hoses.
l Detach the retainers and position aside the wiring harness.
l Remove the fastener.
Torque: 97 lb.in (11 Nm)
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019
Page 2 of 3
5.
l Remove the fasteners and EGR inlet tube.
Torque: 97 lb.in (11 Nm)
l Remove and discard the gasket.
Installation
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019
Page 3 of 3
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019