Professional Documents
Culture Documents
Introduction.
A major structural system in today’s tall building structural design is the use of
shear walls. Structures that solely rely on shear walls is obviously called a shear wall
structure.
Shear walls provide a high in-plane stiffness and strength for both lateral and
gravity loads, and are ideally suitable for tall buildings, especially those conceived
in reinforced concrete.
Tall buildings designed to carry the entire lateral loading through shear walls can
be economical to heights of around 40-stories. Taller structures than 40 stories
usually combine shear walls with other structural systems.
Shear walls are continuous from the top of the building down into the foundations,
to whom they are rigidly attached. They are thus analyzed as vertical cantilevers.
In our previous lecture we saw that the term “shear walls” is a misnomer, because
shear walls deform predominantly in flexure.
http://slidepdf.com/reader/full/proportionate-and-nonproportionate-shear-walls 1/5
8/17/2019 Proportionate and Nonproportionate Shear Walls
http://slidepdf.com/reader/full/proportionate-and-nonproportionate-shear-walls 2/5
8/17/2019 Proportionate and Nonproportionate Shear Walls
This lecture studies the behavior of shear walls linked to the floor slabs. The slabs are
assumed to have little or no flexural (bending) resistance, so that they only capable of
transmitting horizontal forces into the shear walls.
Tall buildings using shear walls will consist of an assembly of walls of different lengths
and thicknesses. Linking these walls requires a careful study of how the moments and
shears redistribute their loads between the walls and their connecting girders and floor
slabs.
http://slidepdf.com/reader/full/proportionate-and-nonproportionate-shear-walls 3/5
8/17/2019 Proportionate and Nonproportionate Shear Walls
In a proportionate wall
system, the ratios of the
flexural rigidities remain
constant throughout their
heights. These walls do not
incur any re-distribution of
shears or moments at the
change of levels. This system
is statically determinate,
and from equilibrium, the
external moment and shear
is distributed between the
walls in proportion to their
flexural rigidities.
the moment of
inertia changes
consistently
throughout
http://slidepdf.com/reader/full/proportionate-and-nonproportionate-shear-walls 4/5
8/17/2019 Proportionate and Nonproportionate Shear Walls
the moment of
inertia does not
changes
consistently
throughout
http://slidepdf.com/reader/full/proportionate-and-nonproportionate-shear-walls 5/5