The document summarizes the Model A-3 and AL-2 Lok-Set Mechanical packers. It describes them as retrievable packers that allow tubing to be set in tension, compression, or neutral and combine advantages of retrievable and permanent packers. The AL-2 is a large bore version of the A-3. Both packers hold pressure differentials, provide tubing anchoring, have dovetail slips, optional elastomers, internal bypass, and can be set and released with right-hand rotation. They are suitable for applications like zonal isolation, injection, and production.
The document summarizes the Model A-3 and AL-2 Lok-Set Mechanical packers. It describes them as retrievable packers that allow tubing to be set in tension, compression, or neutral and combine advantages of retrievable and permanent packers. The AL-2 is a large bore version of the A-3. Both packers hold pressure differentials, provide tubing anchoring, have dovetail slips, optional elastomers, internal bypass, and can be set and released with right-hand rotation. They are suitable for applications like zonal isolation, injection, and production.
The document summarizes the Model A-3 and AL-2 Lok-Set Mechanical packers. It describes them as retrievable packers that allow tubing to be set in tension, compression, or neutral and combine advantages of retrievable and permanent packers. The AL-2 is a large bore version of the A-3. Both packers hold pressure differentials, provide tubing anchoring, have dovetail slips, optional elastomers, internal bypass, and can be set and released with right-hand rotation. They are suitable for applications like zonal isolation, injection, and production.
The Model A-3 Lok-Set Mechanical Packer is a compression set,
retrievable packer that allows the tubing to be left in a tension,
compression, or neutral operations. The Lok-Set combines advantages of a retrievable packer with features of a permanent packer. Its ability to lock down tubing forces provides for a broad
MODEL A-3 AND AL-2 - LOK-SET MECHANICAL - SET RETRIEVABLE PACKER
range of applications. The Model AL-2 Lok-Set Mechanical Packer is a large bore version of the A-3 Packer. Features, advantages, and operational procedures are the same as those for the A-3 Packers.
BENEFITS AND CHARACTERISTICS
Holds pressure differentials from above or below
? Provides tubing anchoring with tension applied, suitable for ? pumping wells or injection, controlling tubing forces related to change fluid temperatures Opposed dovetail slips for positive set ? Elastomer options available for hostile environments ? Internal by-pass ? Tubing can be landed in tension, compression, or neutral ? Right-hand rotation sets and releases the packer ? Packing element compression is locked in by ratching action of ? lock segments, also permitting rotation in only one direction Retracted dovetail slips ?
APPLICATIONS Meets several requirements for zonal isolation, injection, ? pumping and production
OPERATION
Hang the A-3 Packer to completely stretch it out before starting in
the hole. Immediately prior to running in, rotate the drag block housing sub-assembly several turns to the left to make sure the segments are functioning properly. Do not rotate the drag block housing sub-assembly to the right as this will bind the control segments and prevent them from moving after reaching setting depth. Upon reaching setting depth, slowly lower the packer while rotating the tubing (approximately two turns right at the tool) until the packer takes weight. Set-down a minimum of 6,000 lb. to initially set the upper slips. Lowering of the tool must take place while rotating for the tool to set properly. Apply an upstrain of approximately 3,000 to 6,000 lb. and rotate the tubing (four to eight turns at the tool) to the right until the tool moves up the hole. When releasing the packer with pressure in favor of the tubing, rotate tubing to the right slowly enough to equalize before the lower slips disengage. Continue to rotate to the right several turns while moving up the hole to be certain the slips are fully retracted.
MODEL A-3 AND AL-2 - LOK-SET MECHANICAL - SET RETRIEVABLE PACKER