Professional Documents
Culture Documents
Bill No. 03 - Substructure and Ground Floor
Bill No. 03 - Substructure and Ground Floor
TZS TZS
ELEMENT No. 01 - SUBSTRUCTURE (ALL PROVISIONAL)
SITE PREPARATION
a Before starting work the Contractor shall carry out a thorough survey and
examination of the areas affected by the earthworks and make a written
report to the Architect thereon. The Contractor is to locate and mark the
position of existing services affected by the earthworks. Any damage by
the Contractor, or his representatives, to existing pipes, cables and services,
which could reasonably have been foreseen and avoided by such survey,
shall be for the Contractor's account - Item - 1,000,000.00
EXCAVATION
Excavating
Disposal
Excavated material
g backfilling; depositing and compacting in layers maximum 150 thick 2,110 CM 4,500.00 9,495,855.23
DISPOSAL OF WATER
Generally
Generally
Sides of excavation
Beds
c 150 mm thick; depositing and compacting; leveling; blinding 2,523 SM 12,500.00 31,537,500.00
ANTI-TERMITE TREATMENT
Normal; class 20
Blinding
foundations in trenches
steps
Ramps
f 150 mm thick; sloping not exceeding 15 degrees from horizontal 45 SM 52,500.00 2,362,500.00
Beds
walls
REINFORCEMENT
In any location
Fabric; B.S.4483
Reference A 393; mesh 200 x 200 mm; weight 6.16 kg per square
metre; 200 mm end laps; 200 mm side laps
BLOCKWORK
Concrete blocks; B.S. 6073; type A; 7.0 N per square millimetre; solid; in
cement mortar (1:4)
Walls
horizontal
WALLING SUNDRIES
INSITU FINISHINGS
walls
Generally
c 20 mm thick; 250 mm wide; filling with expansion joint materials 115 LM 45,000.00 5,184,000.00
COLLECTION
REINFORCEMENT
Soffits; horizontal
Generally
i 20 mm thick; 250 mm wide; filling with expansion joint materials 115 LM 45,000.00 5,184,000.00
Walls
Landings
REINFORCEMENT
In any location
Soffits; horizontal
Soffits; sloping
Generally
METALWORK
Mild steel; powder coated; including grinding all joints smooth; etch primer
and two finishing coats to architect's approval
Handrails
Balusters
f 50 mm diameter; one end welded to plate one end welded to handrail 41 LM 50,000.00 2,025,000.00
Intermediate rail
Brackets;
h 95 mm diameter plates; holed two times for 12 mm diameter bolt 45 No 24,000.00 1,080,000.00
Bolts
Jenabai Hasham Residency Page 03/3.2 Element No. 03-Staircase & Lift Shaft Walls
500450168.xls
QTY UNIT RATE TOTAL
TZS TZS
to collection TZS 17,553,480.00
Porcelain tiles; Full body; Non slip; Matt finish; colour and laying pattern to
architect's approval; bedding and jointing in cement and sand mortar (1:4);
grouting joints with matching colour cement; internal
600 x 300 x 12 mm; butt joints straight both ways to cement and
sand base; generally to
INSITU FINISHINGS
BEDS OR BACKINGS
Jenabai Hasham Residency Page 03/3.3 Element No. 03-Staircase & Lift Shaft Walls
500450168.xls
QTY UNIT RATE TOTAL
TZS TZS
COLLECTION
Jenabai Hasham Residency Page 03/3.4 Element No. 03-Staircase & Lift Shaft Walls
500450168.xls
QTY UNIT RATE TOTAL
TZS TZS
ELEMENT No. 03 - STAIRCASES AND LIFT SHAFT WALLS
TO BILL No. 03 SUMMARY TZS 117,035,056.00
Jenabai Hasham Residency Page 03/3.5 Element No. 03-Staircase & Lift Shaft Walls
500450168.xls
QTY UNIT RATE TOTAL
TZS TZS
ELEMENT No. 04 - WALLING
PRECAST CONCRETE
Window Copings
EXTERNAL WALLING
BLOCKWORK
Concrete blocks; B.S. 6073; type A; 7.0 N per square millimetre; solid; in
cement mortar (1:4)
Walls
INTERNAL WALLING
BLOCKWORK
Concrete blocks; B.S. 6073; type A; 7.0 N per square millimetre; solid; in
cement mortar (1:4)
Walls
a 4700 x 1500 mm; high overall size; with sliding panel sizes as per
Architect's drawings and window schedule; type 2 No 1,269,000.00 2,538,000.00
b 3000 x 1500 mm; high overall size; with sliding panel sizes as per
Architect's drawings and window schedule; type 1 No 810,000.00 810,000.00
c 1500 x 1500 mm; high overall size; with sliding panel sizes as per
Architect's drawings and window schedule; type 18 No 405,000.00 7,290,000.00
d 1150 x 1500 mm; high overall size; with sliding panel sizes as per
Architect's drawings and window schedule; type 1 No 310,500.00 310,500.00
GENERAL JOINERY
Security door; LC fire door; with mix&match design; single leaf; with and
including electrostatic painted frame; fire resistant honeycomb infill
compressed hardened flex board with CPL coating accordance with
architect's specifications and door schedule
Frames
Architraves
CARPENTERS METALWORK
GLASS WORK
Supply and install frameless glass door; made up of 10mm toughened clear
glass; comprising of double leaf; with top fixed glass supported by stainless
steel grade A316 kick plate and top rail of 150mm high; complete with floor
springs, full height A316 grade stainless steel -handles, locks, pivots, patches
and other necessary fittings and ironmongeries; all in accordance with
Architect's drawings and door schedule
IRONMONGERY
COLLECTION
INSITU FINISHINGS
Porcelain tiles; Full body; Non slip; Matt finish; colour and laying pattern
to architect's approval; bedding and jointing in cement and sand mortar (1:4);
grouting joints with matching colour cement; internal
600 x 300 x 12 mm; butt joints straight both ways to cement and
sand base; generally to
Ceramic tiles; Grade "A"; rustic non-slip; unglazed; fixing with approved
adhesive; grouting with Sellajunt coloured grout; all to manufacturer's
specification and architects satisfaction
600 x 300 x 6 mm; butt joints straight both ways to cement and sand
base; generally to
c Extra; uPVC tile edge finishing beads; mitred at all corners 136 LM 5,000.00 680,000.00
BEDS OR BACKINGS
ALUCOBOND CLADDING
General surfaces
g over 300 mm girth; including aluminium frame; colour to Architect's Approval 407 SM 350,000.00 142,450,000.00
COLLECTION
Walls
Ceilings
Beams
Columns
Walls
General surfaces
Jenabai Hasham Residency Page 03/7.2 Element No. 07-Decoration & Painting
500450168.xls
QTY UNIT RATE TOTAL
TZS TZS
ELEMENT No. 09 - BUILDER'S WORKS IN CONNECTION WITH
SERVICES INSTALLATIONS
Allow for general builder's work, making of ways, hole and chases and
making good finishes to the electrical, ICT and Security installations to the
satisfaction of the Architect
Allow for general builder's work, making of ways, hole and chases and
making good finishes to mechanical, plumbing, fire fighting and gas
installations to the satisfaction of the Architect
SUMMARY OF ELEMENTS