You are on page 1of 6

Crystal Luster

Flower Bracelet ©2006 Deborah Roberti

Use triangle weave, a variation of right-angle weave,


to create and combine Japanese Hana-Ami motifs
(Hana means “flower” and Ami means “stitch”
or “net”) into a simple crystal flower bracelet.
Although I use green, amethyst and blue fire-
polished beads, any type of size 4mm beads of
any color will also work beautifully.

MATERIALS
(for a 7-inch bracelet, not including clasp)
•4
 yards waxed Nymo or C-Lon thread, size D, = gold seed bead
or 6 lb. FireLine = green seed bead
• About 52 gold size 11/0 seed beads or Delica beads
• About 125 green size 11/0 seed beads or Delica beads = green fire-polished bead
• About 55 green 4mm fire-polished beads*
• About 36 amethyst 4mm fire-polished beads* = blue fire-polished bead
• About 36 blue 4mm fire-polished beads*
• clasp = amethyst fire-polished bead
*NOTE: Any type 4mm beads of any color will also
work just wonderfully.
STEP 3: String an amethyst fire-polished bead,
STEP 1: Thread your needle with 4 yards Nymo, a green seed bead, a green fire-polished bead,
C-Lon or Fireline. String 4 gold seed beads. a green seed bead and an amethyst fire-polished
Leaving about a 12-inch tail for attach­ing the bead.
clasp, tie the beads together into a circle:
Go around and back through the gold seed bead
on the circle of four gold seed beads that you
exited at the end of Step 2, forming a “triangle”
of beads:

STEP 2: Go through the gold seed bead to the


right of the knot:

Crystal Luster Bracelet ©2006 Deborah Roberti 1 www.AroundTheBeadingTable.com


STEP 4: Continue on through the next gold seed STEP 8: Continue on through the next gold seed
bead on the circle (highlighted in RED): bead on the circle (highlighted in RED):

STEP 5: String an amethyst fire-polished bead, a


green seed bead, a green fire-polished bead and
a green seed bead. STEP 9: String an amethyst fire-polished bead, a
green seed bead, a green fire-polished bead and
Go around and back down through the amethyst
a green seed bead.
fire-polished bead that you added in Step 3
(highlighted in RED) and back through the Go around and back through the amethyst fire-
gold seed bead on the circle of four gold seed polished bead you added in Step 7 (high­lighted
beads that you exited at the end of the last step in RED) and back through the gold seed bead that
(highlighted in RED): you exited at the end of Step 8 (highlighted in
RED):

STEP 6: Continue on through the next gold seed


bead on the circle (highlighted in RED):

STEP 10: Go up through the amethyst fire-


polished bead highlighted in RED:

STEP 7: String an amethyst fire-polished bead, a


green seed bead, a green fire-polished bead and
a green seed bead.

Go around and back up through the amethyst


fire-polished bead that you added in Step 5
STEP 11: String a green seed bead, a green fire-
(highlighted in RED) and back through the gold
polished bead and a green seed bead.
seed bead that you exited at the end of the
last step (highlighted in RED): Go through the amethyst fire-polished bead you
added in Step 9 (highlighted in RED) and through
the gold seed bead on the circle of gold seed
beads (also highlighted in RED):

Crystal Luster Bracelet ©2006 Deborah Roberti 2 www.AroundTheBeadingTable.com


STEP 12: Continue on through the next gold seed STEP 15: String three gold seed beads.
bead on the circle, the amethyst fire-polished
bead, the green seed bead and the green fire- Go around and back through the gold seed bead
polished bead (all highlighted in RED): you just exited (highlighted in RED), forming a
new circle of four gold seed beads:

STEP 13: You just finished your first Hana-Ami


flower motif. You’ll start a second motif but use STEP 16: Continue on through the next gold seed
blue fire-polished beads instead of amethyst fire- bead on the circle (highlighted in RED):
polished beads.

String a green seed bead, a blue fire-polished


bead, a gold seed bead, a blue fire-polished bead
and a green seed bead.

Go around and back through the green fire-


polished bead you exited at the end of the
last step (highlighted in RED):
STEP 17: String a blue fire-polished bead, a green
seed bead, a green fire-polished bead and a green
seed bead.

Go around and back through the blue fire-


polished bead that you added in Step 13 (high­
lighted in RED) and back through the gold seed
bead on the circle of four gold seed beads that
For extra reinforcement, go back through the you exited at the end of the last step (highlighted
beads you just added (highlighted in RED): in RED).

Continue on through the next gold seed bead on


the circle (highlighted in RED):

STEP 14: Continue back on through the green


seed bead, the blue fire-polished bead and the
gold seed bead (highlighted in RED):

Many more FREE patterns on my website here:


https://www.aroundthebeadingtable.com/Tutorials/

Crystal Luster Bracelet ©2006 Deborah Roberti 3 www.AroundTheBeadingTable.com


STEP 18: String a blue fire-polished bead, a green STEP 21: To close the second Hana-Ami motif,
seed bead, a green fire-polished bead and a green string a green seed bead, a green fire-polished
seed bead. bead and a green seed bead.

Go around and back down through the blue Go up through the blue fire-polished bead,
fire-polished bead that you added in the last through the gold seed bead on the circle of gold
step (highlighted in RED) and back through the seed beads, through the blue fire-polished bead,
gold seed bead on the circle of four gold seed the green seed bead and exit out of the green fire-
beads that you exited at the end of the last step polished bead (all highlighted in RED):
(highlighted in RED).

Continue on through the next gold seed bead on


the circle (highlighted in RED):

STEP 22: You just finished your second Hana-


Ami flower motif. You’ll start a third motif but use
amethyst fire-polished beads instead of blue fire-
polished beads.
String a green seed bead, an amethyst fire-
STEP 19: String a blue fire-polished bead, a green polished bead, a gold seed bead, an amethyst fire-
seed bead, a green fire-polished bead and a green polished bead and a green seed bead. Go around
seed bead. and back through the green fire-polished bead
you exited at the end of the last step (highlighted
Go around and back through the blue fire- in RED):
polished bead that you added in the last step
(high­lighted in RED) and back through the
gold seed bead on the circle of four gold seed
beads that you exited at the end of the last step
(highlighted in RED):

For extra reinforcement, go through the beads you


just added in this step again. Exit out of the green
fire-polished bead like you did before.

STEP 23: Continue back on through the green


seed bead, the amethyst fire-polished bead and
STEP 20: Go down through the blue fire-polished
the gold seed bead (highlighted in RED):
bead highlighted in RED:

Crystal Luster Bracelet ©2006 Deborah Roberti 4 www.AroundTheBeadingTable.com


STEP 24: String three gold seed beads. Go around STEP 27: String an amethyst fire-polished bead, a
and back through the gold seed bead that you just green seed bead, a green fire-polished bead and
exited (highlighted in RED), forming a new circle a green seed bead.
of four gold seed beads:
Go around and back through the amethyst
fire-polished bead that you added in the last
step (highlighted in RED) and back through the
gold seed bead on the circle of four gold seed
beads that you exited at the end of the last step
(highlighted in RED).

Continue on through the next gold seed bead on


the circle (highlighted in RED):

STEP 25: Continue on through the next gold seed


bead on the circle (highlighted in RED):

STEP 28: String an amethyst fire-polished bead, a


green seed bead, a green fire-polished bead and a
green seed bead.

Go around and back through the amethyst


STEP 26: String an amethyst fire-polished bead, a
fire-polished bead that you added in the last
green seed bead, a green fire-polished bead and
step (highlighted in RED) and back through the
a green seed bead.
gold seed bead on the circle of four gold seed
Go around and back through the amethyst beads that you exited at the end of the last step
fire-polished bead that you added in Step 22 (highlighted in RED):
(highlighted in RED) and back through the
gold seed bead on the circle of four gold seed
beads that you exited at the end of the last step
(highlighted in RED).

Continue on through the next gold seed bead on


the circle (highlighted in RED):

STEP 29: Go down through the amethyst fire-


polished bead highlighted in RED:

If you would like to be notified when new patterns are posted, go


to AroundTheBeadingTable.com and click on the “Join the Mailing
List” tab on the left to subscribe to my mailing list.

Crystal Luster Bracelet ©2006 Deborah Roberti 5 www.AroundTheBeadingTable.com


STEP 30: To close the third Hana-Ami motif, string STEP 31: To attach one end of the clasp, string
a green seed bead, a green fire-polished bead and a green seed bead, a green fire-polished bead,
a green seed bead. a green seed bead and a gold seed bead.

Go up through the amethyst fire-polished bead, Go through the clasp and then back through the
through the two gold seed beads on the circle of gold seed bead that you just strung:
gold seed beads, through the amethyst fire-polished
bead, the green seed bead and exit out of the green
fire-polished bead (all highlighted in RED):

STEP 32: String a green seed bead, a green fire-


polished bead and a green seed bead. Go back
Repeat Steps 13-30 until your bracelet is the through the green fire-polished bead you exited
length you want it, minus about a half-inch and at the end of the last step (highlighted in RED):
the length of your clasp:

Go back through these beads and the clasp


several times to reinforce your attachment to the
clasp. Weave your way back into the bracelet,
knot in several places and then cut your thread.

STEP 33: To attach the clasp to the other end of


the bracelet, simply thread your needle with the
tail from Step 1.

Weave your way out of the first Hana-Ami motif


so that you exit out of the green fire-polished bead
highlighted in RED:

Repeat Steps 31 and 32 to attach the other end of


the clasp.

Crystal Luster Bracelet ©2006 Deborah Roberti 6 www.AroundTheBeadingTable.com

You might also like