Professional Documents
Culture Documents
Part Number 26-84: Illustrated Parts Breakdown
Part Number 26-84: Illustrated Parts Breakdown
PAGE ISSUE
NO. DATE
i
INSTRUCTION MANUAL 26-84
TABLE OF CONTENTS
LIST OF ILLUSTRATIONS
ii
INSTRUCTION MANUAL 26-84
LIST OF ILLUSTRATIONS (Cont’d)
3-4 Dual Vernier Squeeze Box Manifold Mud Pressure (DSBM) . . . . . . 3-7
System (SI Units)
3-5 Remote Mud Pressure (RNG) System, Panel Mount (SI Units). . . . . 3-9
3-6 Dual Vernier Mud Pressure (DMG) System, Panel Mount . . . . . . . 3-12
(SI Units)
3-7 Remote Guage and Damper Assembly, Box Mount (SI Units). . . . . . 3-14
3-8 Dual Vernier Gauge and Damper Assembly, Box Mount (SI Units). . . 3-18
3-9 Remote Gauge and Damper Assembly, Panel Mount (SI Units). . . . . 3-22
3-10 Dual Vernier Gauge and Damper Assembly, Panel Mount . . . . . . . 3-26
(SI Units)
LIST OF TABLES
iii
INSTRUCTION MANUAL 26-84
RELATED PUBLICATIONS
Publication
Number Title
iv
INSTRUCTION MANUAL 26-84
SECTION I
INTRODUCTION
l-l INTRODUCTION
1-2 This manual contains an illustrated parts breakdown for the Remote Mud
Pressure Indicating System(s) manufactured by TOTCO Instrument Sales.
l-3 This section describes how to use the GROUP ASSEMBLY PARTS LIST, NUMERICAL
INDEX (when included), and other related information.
l-5 The GROUP ASSEMBLY PARTS LIST section (See Figures 2-l and subsequent) in-
cludes detailed or exploded views accompanied by parts lists keyed to the
index numbers on the illustrations. Index numbers on the illustration are circled
if the component or subassembly is broken down by a subsequent detail illustration
and parts list. Each assembly is listed in its disassembly order. Part descrip-
tions show a relationship to an assembly by indentation. The relationship of a
part to the next higher assembly (NHA) or main group may also be shown by cross-
reference notes. Attaching parts immediately follow the items they attach and
are identified by (AP) following the description. Attaching parts indent to the
same level as the items attached.
l-6 FIGURE AND INDEX NUMBER COLUMN. Three groups of digits separated by dashes
make up this column (i.e. X-X-XX). The first two groups represent the
figure number of the corresponding illustration, The last group of digits is the
index number of each part found in the illustration. An asterisk (") instead of
an index number indicates the part is not illustrated.
l-7 PART NUMBER COLUMN. This column lists TOTCO part numbers and standard
items. The entry STD HDW in this column identifies hardware without an
assigned part number and indicates availability from commercial sources. Infor-
mation for purchase of these items is contained in the DESCRIPTION column.
l-8 DESCRIPTION COLUMN. This column describes each assembly, its attaching
parts, and detail parts of the assembly. Indentation shows relationship
of parts to the assembly. Parts identified with (AP) are attaching parts for
items and assemblies. Where it is impractical to show completely in one illustra-
tion all detail parts of any one subassembly, the subassembly is illustrated
completely assembled as part of one illustration and a separate, disassembled
view of the subassembly is furnished. A notation in parentheses following a
description cross-refers a subassembly to its illustration or refers to the figure
and index number of the subassembly on the NHA illustration.
l-9 Listed parts are indented to indicate item relationship to the NHA. The
description of each assembly is followed in the list (except for attaching
parts) by its detail parts indented one column to the right (See 4, Figure l-l).
To determine the NHA of a part or assembly, note the column in which the first word
of the nomenclature appears. The first item directly above which appears one column
to the left (except for attaching parts) is the NHA.
l-l
INSTRUCTION MANUAL 26-84
1
l-2
INSTRUCTION MANUAL 26-84
\
3 Use the associated parts list (the FIGURE
number on the illustration and the parts list
must match) to find the detail illustration that
has a breakdown of the applicable component
or subassembly.
x0 815-052131(5/811
1-4
INSTRUCTION MANUAL 26-84
l-10 UNITS PER ASSEMBLY COLUMN. This column lists the number of units required
for one NHA. Therefore, the quantities specified are not necessarily the
total number used per installation or end item. AR denotes that parts should be
selected as required. The term REF denotes parts which are listed for reference
purposes. Units per assembly for other REF items are shown on the appropriate
figures referenced in the DESCRIPTION column. NP denotes parts not procurable.
l-11 USE ON CODE COLUMN. Code letters in this column show variations in parts
on two or more similar assemblies. Parts peculiar to a particular assembly
are identified by the same code letter as the main assembly; common parts are un-
coded.
1-13 The NUMERICAL INDEX section contains a numerical listing of parts and/or
drawings that are listed in the GROUP ASSEMBLY PARTS LIST. Standard
hardware items are not included.
1-15 Additional informative lists, such as a SPARE PARTS LIST and FUSE LIST,
follow the GROUP ASSEMBLY PARTS LIST section or NUMERICAL INDEX section
(as applicable).
l-17 If the part number of an item is known, turn to the NUMERICAL INDEX and
find the applicable figure and index number. Use the figure and index
number to locate the illustration and description of the part in the GROUP ASSEMBLY
PARTS LIST.
1-18 If the part number of an item is unknown, turn to the system or top assembly
illustration (usually the first illustration in the GROUP ASSEMBLY PARTS
LIST). Trace back through the applicable component or subassembly detail illustra-
tions to locate the one in which the required item appears and is identified with
an index number. When the correct illustration has been located, use the FIGURE
number of that illustration to find the corresponding parts list. Use the index
number of the required item (assigned in the corresponding illustration) to locate
the item in the parts list.
1-19 CATALOG NUMBER VERSUS PART NUMBERS
l-20 Certain product line equipment systems are coded with catalog numbers in
addition to part numbers (See Figure l-2 and l-3). These catalog numbers
are listed in the Group Assembly Parts List Section(s) under the system part numbers
in parentheses. Catalog numbers are also cross-referenced in the Numerical Index
Section.
l-5
INSTRUCTION MANUAL 26-84
SPECIFICATION VARIABLES:
Gauge Pressure Capacity NOTE: ENGLISH, METRIC AND S.I. CONFIGURATIONS ARE
Gauge Protector Assembly Pressure Capacity and Size AVAILABLE IN MOST GAUGE SYSTEMS AND SUCH PREFER-
Mounting Configuration ENCE SHOULD BE INDICATED.
AVAILABILITY CHART
Gauge Gauge Protector Assembly
Pressure Capacity (psi) Pressure Capacity and Size Mounting Configuration
1,000
15,000 psi 1” or
3,000 6,000 psi 2” Bracket Mount
5.000 or
10,000 15,000 1” or Panel Mount
psi
15,000 15,000 psi 2”
EXAMPLE: RMG-030-062-PM
All remote Mud Gauge System catalog numbers should begin with RMG and be followed by 6 identifying numbers and the
mounting configuration codes as shown.
ORDERING CODES
Gauge Protector Assembly
Gauge Pressure Capacity Code Pressure Capacity and Size Code Mounting Configuration Code
1,000 psi 010 6,000 psi 2” 062 Bracket Mount BM
3,000 psi 030 15,000 psi 1” 151 Panel Mount PM
5,000 psi 050 15,000 psi 2” 152
10,000 psi 100
15,000 psi 150
SPECIFICATION VARIABLES
Sauge Pressure Capacity NOTE: ENGLISH, METRIC AND S.I. CONFIGURATIONS ARE
Sauge Protector Assembly Pressure Capacity and Size AVAILABLE IN MOST GAUGE SYSTEMS AND SUCH PREFER
vlounting Configuration ENCE SHOULD BE INDICATED.
\VAILABILITY CHART
Gauge Pressure Capacity Gauge Protector Assembly Mounting
psi Pressure Capacity and Size Configuration
6,000 psi 2” or
4,000
15,000 psi 1”
Bracket Mount
8,000 or
15,000 psi 1 * or
12,000 Panel Mount
15,000 psi 2”
ORDERING CODES
Gauge Protector
Assembly
Gauge Pressure Capacity Code Pressure and Size Code Mounting Configuration Code
4,000 040 6,000 psi 2” 062 Bracket Mt. BM
8,000 080 15,000 psi 1” 151 Panel Mt. PM
12,000 120 15,000 psi 2” 152
16,000 160
SPECIFICATION VARIABLES:
Gauge Pressure Capacity
Gauge Protector Assembly Pressure Capacity and Size
Mounting Configuration
AVAILABILITY CHART
Gauge Pressure Capacity Gauge Protector Assembly
(psi) kPa Pressure Capacity and Size Mounting Configuration
1,000 7,000 I
15,000 psi 1” or
3,000 20,000 Bracket Mount
6,000 psi 2”
5,000 35,000 or
10,000 70,000 15,000 psi 1” or Panel Mount
15,000 100,000 15,000 psi 2”
EXAMPLE: RMG-030-062-PM
Gaufiug knting
Capacity Protector Configuration
Assembly
All remote Mud Gauge System catalog numbers should begin with RMG and be followed by 6 identifying numbers and the
mounting configuration codes as shown.
NOTE: For SI configurations add SI to the catalog number. For example: RMG-030-062-PM-SI
ORDERING CODES
Gauge Protector Assembly
Gauge Pressure Capacity Code Pressure Capacity and Size Code Mounting Configuration Code
1,000 psi 010 6,000 psi 2” 062 Bracket Mount BM
3,000 psi 030 15,000 psi 1” 151 Panel Mount PM
5,000 psi 050 15,000 psi 2” 152
10,000 psi 100
15,000 psi 150
SPECIFICATION VARIABLES
Gauge Pressure Capacity
Gauge Protector Assembly Pressure Capacity and Size
Mounting Configuration
AVAILABILITY CHART
Gauge Pressure Capacity Gauge Protector Assembly Mounting
psi kPa Pressure Capacity and Size Configuration
5,800 40,000 6,000 psi 2” or
Bracket Mount
15,000 psi 1”
11,600 80,000 15,000 psi 1” or PanePLlount
15,000 psi 2”
Gaug<Protjctor hnting
Pressure Assembly Pressure Configuration
Capacity Capacity and Size
ORDERING CODES
Gauge Protector
&sembly
G;* lge Pressure Capacity Code Pressure and Size Code Mounting Con Ifiguration
_ Code
5,800 058 6,000 psi 2” 062 Bracket Mt. BM
11.600 116 15,000 psi 1” 151 Panel Mt. PM
15,000 psi 2”
TO A
2-l
INSTRUCTION MANUAL 26-84
2-2
INSTRUCTION MANUAL 26-84
2-3
INSTRUCTION MANUAL 26-84
2-4
INSTRUCTION MANUAL 26-84
1 TO A
2-5
INSTRUCTION MANUAL 26-84
2-6
INSTRUCTION MANUAL 26-84
DETAIL A
2-7
INSTRUCTION MANUAL 26-84
2-8
INSTRUCTION MANUAL 26-84
2-9
INSTRUCTION MANUAL 26-84
2-10
INSTRUCTION MANUAL 26-84
2-11
INSTRUCTION MANUAL 26-84
2-12
INSTRUCTION MANUAL 26-84
2-13
INSTRUCTION MANUAL 26-84
2-14
INSTRUCTION MANUAL 26-84
2-15
INSTRUCTION MANUAL 26-84
2-16
INSTRUCTION MANUAL 26-84
2-17
INSTRUCTION MANUAL 26-84
2-19
INSTRUCTION MANUAL 26-84
2-20
INSTRUCTION MANUAL 26-84
2-21
INSTRUCTION MANUAL 26-84
2-23
INSTRUCTION MANUAL 26-84
2-24
INSTRUCTION MANUAL 26-84
2-25
INSTRUCTION MANUAL 26-84
z
i
w
2-27
INSTRUCTION MANUAL 26-84
2-28
INSTRUCTION MANUAL 26-84
2-29
INSTRUCTION MANUAL26-84
2-31
INSTRUCTION MANUAL 26-84
2-32
INSTRUCTION MANUAL 26-84
2-33
INSTRUCTION MANUAL 26-84
2-34
INSTRUCTION MANUAL 26-84
2-35
INSTRUCTION MANUAL 26-84
11
2-36
INSTRUCTION MANUAL 26-84
SECTION Ill
GROUP ASSEMBLY PARTS LIST (SI UNITS)
REMCITE MlIl3 PRFSSIIRF SYSTFM
TO A
3-l
I
3-2
INSTRUCTION MANUAL 26-84
3-3
INSTRUCTION MANUAL 26-84
-
FIG. & UNITS USE
INDEX PART NUMBER DESCRIPTION PER ON
NO. (CATALOG NO.) 1 2 3 4 5 6 7 ASSY CODE
3-4
INSTRUCTION MANUAL 26-84
1 TO A
3-5
INSTRUCTION MANUAL 26-84
3-6
INSTRUCTION MANUAL 26-84
SEE DETAIL A
FIGURE 3-4. DUAL VERNIER SQUEEZE BOX MANIFOLD MUD PRESSURE (DSBM)
SYSTEM (SI UNITS)
3-7
INSTRUCTION MANUAL 26-84
3-8
INSTRUCTION MANUAL 26-84
HIGH PRESSURE
3-9
INSTRUCTION MANUAL 26-84
3-10
INSTRUCTION MANUAL 26-84
3-11
INSTRUCTION MANUAL 26-84
26 84, 6
3-12
INSTRUCTION MANUAL 26-84
3-13
INSTRUCTION MANUAL 26-84
K
P
m
i
w
3-7- 212922-103 GAUGE AND DAMPER ASSY (SI), 7000 kPa . . . REF
(See Figures 3-l and 3-2 for NHA)
212923-101 GAUGE AND DAMPER ASSY (SI), 20,000 kPa . . REF
(See Figures 3-1 and 3-2 for NHA)
212923-102 GAUGE AND DAMPER ASSY (SI), 35,000 kPa . . REF
(See Figures 3-l and 3-2 for NHA)
212923-104 GAUGE AND DAMPER ASSY (SI), 70,000 kPa . . REF
(See Figures 3-l and 3-2 for NHA)
212923-105 GAUGE AND DAMPER ASSY (SI), 100,000 kPa . REF
(See Figures 3-l and 3-2 for NHA)
-1 969131-002 . CAP, Plug . . . . . . . . . . . . . . . 1
-2 210366 . ELBOW, Hex street, l/4 NPT sst . . . , . 1
-3 210022 . RING, Case . . . . . . . . . . . . . . . 1
-4 999383-056 . SCREW, Fillister hd, lo-32 unf x . . . . 4
l/2 sst (AP)
-5 210029 . GLASS, 6 in. gauge . . . . . . . . . . . 1
-6 979456-259 . O-RING, Nitrile 70 shore . . . . . . . . 1
-7 211462 . POINTER, 6 in. gauge (4.12 in. lg . . . 1
black)
-8 211661 . DIAL, Mud pressure, 7000 kPa . . . . . . 1
211659 . DIAL, Mud pressure, 20,000 kPa . . . . . 1
211663 . DIAL, Mud pressure, 35,000 kPa . . . . . 1
211664 . DIAL, Mud pressure, 70,000 kPa . . . . . 1
211666 . DIAL, Mud pressure, 100,000 kPa . . . . 1
-9 999387-014 . SCREW, Pan hd, No. 6-32 x l/4 sst (AP) . 3
-10 999338-113 . WASHER, Internal lock, No. 6 . . . . . . 3
cad pl stl (AP)
-11 971107-012 . CONNECTOR, Male (with ferrule and . . . REF
nut) l/8 tube x l/8 NPT (See 5,
Figures 2-13 and 2-14 for details)
-12 212595-104 . BOURDONTUBE ASSY, 6 in. gauge, . . . . 1
6998 kPa
212595-108 . BOURDONTUBE ASSY, 6 in. gauge, . . . . 1
20,002 kPa
212595-110 . BOURDON TUBE ASSY, 6 in. gauge, . . . . 1
34,999 kPa
212595-113 . BOURDONTUBE ASSY, 6 in. gauge, . . . . 1
70,005 kPa
212595-115 . BOURDONTUBE ASSY, 6 in. gauge, . . . . 1
100,005 kPa
-13 210359 . SCREW, Tube mount, 6 in. guage (AP) . . 3
-14 979456-456 . O-RING, Nitrile 70 shore (AP). . . . . . 3
-15 210169 .STOP,Tube............ . . . 1
-16 999387-014 . SCREW, Pan hd, No. 6-32 unc x . . . . . 1
l/4 sst (AP)
-17 999338-113 . WASHER, Internal lock, No. 6, cad . . . 1
pl stl (AP)
-18 210924 . LINKAGEASSY. . . . . . . . . , . . . . 1
-19 210538-301 . . SCREW, Shoulder (AP) . . . . . . . . . 2
3-15
INSTRUCTION MANUAL 26-84
3-16
INSTRUCTION MANUAL 26-84
3-17
INSTRUCTION MANUAL 26-84
3-19
INSTRUCTION MANUAL 26-84
3-20
INSTRUCTION MANUAL 26-84
3-21
INSTRUCTION MANUAL 26-84
3-23
INSTRUCTION MANUAL 26-84
3-24
INSTRUCTION MANUAL 26-84
3-25
INSTRUCTION MANTJAL26-84
/\
\
3-27
INSTRUCTION MANUAL 26-84
3-28
INSTRUCTION MANUAL 26-84
SECTION IV
NUMERICAL INDEX
4-1
INSTRUCTION MANUAL 26-84
4-2
INSTRUCTION MANUAL 26-84
4-3
INSTRUCTION MANUAL 26-84
4-5
INSTRUCTION MANUAL 26-84
4-6
INSTRUCTION MANUAL 26-84
4-7
INSTRUCTION MANUAL 26-84
4-8
INSTRUCTION MANUAL 26-84
4-g/4-10
INSTRUCTION MANUAL 26-84
SECTION V
SPARE PARTS LIST
5-2 This section contains information for spare parts. Part numbers and
quantities to be ordered will depend on each repair facility's experi-
ence. An inventory of readily available spare parts will reduce the equipment
down time when replacement of parts is necessary. Standard hardware items are
not included. Sufficient information for obtaining these items is contained in
the parts listing in the Group Assembly Parts List in Section II. For convenience
spare parts (Refer to Table 5-l) are arranged in ascending numerical order by
Figure and Index Numbers.
5-l/5-2