Professional Documents
Culture Documents
Test Preparation > GATE (Civil) > Structural Engineering > Steel Structures
I•
·-
Download the Unacademy Learning App to watch this
0
GET IT O , Download on the
and over 200k more lessons in UPSC, SSC CGL, GATE, N
,. ,.. Google Play • App Store
CAT and many more categories.
•
T unac ad e my
Design Procedure
1. The span of the purlin is taken as c/c distance of the adjacent trusses.
2. The gravity loads P and wind loads H are computed. The component of
these loads in the direction parallel & perpendicular to the sheeting are
determined. These loads are multiplied with partial safety factor for loads
as per table 4 of IS 800:2007 for various load combinations.
5. Assume certain trail section based on the Zp, r eq· Check for the section
classification as per table 2 of IS 800:2007. (Plastic analysis)
6. Check for shear capacity of the section for both u and v axes taken
as (from Moris and Plum 1996):
• Vdz- - fy A
,,,/3 Ymo vz
- fy
• Vdy- ,,,/3 Avy
3Ymo
•
•
•
Design Procedure
7. Compute and check for the safety of the design bending capacity of
the section in both the axes using:
• Zpzfy< lZ
M = Zezfy
dz - · Ymo
Ymo
• Mz+ My ::S; 1 .0
Mdz Mdy