Professional Documents
Culture Documents
(a) Find the required development length of the rebar. The maximum spacing of the
stirrups is s = 7 inches.
(b) Suppose there is not enough room to put a straight rebar in the beam. Find the
required development length of a hooked rebar. Be sure to specify the required
spacing of the stirrups. Check to make sure the hook will fit in the beam in the
vertical direction with 1.5 inch cover on the top.
(c) The spacing of the stirrups in part (b) is much smaller than the 7 inches used in
part (a). Using the smaller spacing of the stirrups, recalculate the required
development length in part (a) and compare the result with part (b).