This document provides a typical detail for an underground waterproofing system using high-density polyethylene (HDPE) membrane. The system includes a 5-10mm thick concrete layer, a 1.5mm thick HDPE lining membrane with overlapped edges welded, a 0.75mm thick HDPE layer, 30mm wide aluminum strips screwed into place, polyurethane sealant, an 80cm wide 1.5mm thick HDPE reinforced strip, a reinforced concrete wall, reinforcing bars, aluminum flashing screwed into place, and a proposed reinforced concrete wall alignment.
This document provides a typical detail for an underground waterproofing system using high-density polyethylene (HDPE) membrane. The system includes a 5-10mm thick concrete layer, a 1.5mm thick HDPE lining membrane with overlapped edges welded, a 0.75mm thick HDPE layer, 30mm wide aluminum strips screwed into place, polyurethane sealant, an 80cm wide 1.5mm thick HDPE reinforced strip, a reinforced concrete wall, reinforcing bars, aluminum flashing screwed into place, and a proposed reinforced concrete wall alignment.
This document provides a typical detail for an underground waterproofing system using high-density polyethylene (HDPE) membrane. The system includes a 5-10mm thick concrete layer, a 1.5mm thick HDPE lining membrane with overlapped edges welded, a 0.75mm thick HDPE layer, 30mm wide aluminum strips screwed into place, polyurethane sealant, an 80cm wide 1.5mm thick HDPE reinforced strip, a reinforced concrete wall, reinforcing bars, aluminum flashing screwed into place, and a proposed reinforced concrete wall alignment.