Professional Documents
Culture Documents
Clamshell Equipment - CT - 08 - 09 - 20 - Manisha Grace PDF
Clamshell Equipment - CT - 08 - 09 - 20 - Manisha Grace PDF
CONSTRUCTION TECHNOLOGY
What is clam-shell bucket?
The clam-shell bucket is a sophisticated articulating two-
piece bucket mechanically hinged at the middle to form
a claw-like appendage with an internal volume.
How it is designed?
• It is attached by a hangar or bracket
and uses ground engaging tool on its
cutting edge to dig in a vertical
direction.
• Clam-shell buckets are commonly used
in dredging, excavation or material
handling.
• However, each application has its
unique requirements and has to be
designed optimally for maximum
efficiency.
• The design, develop and manufacture
both hydraulic and mechanical clam-
shell used on excavators and cranes.
Why these Clam-shell buckets are designed?
• Designed for durability for all material loading needs in field of
work towards higher productivity.
• Specially designed tooth point are equipped on the cutting
edge to provide higher strength and longer life.
• Hydraulic rotation and knock-around manual rotation is
available.
Light (P<1.2t/m3)
Medium (P=1.2~2.0t/m3)
Heavy (P=2.0~2.6t/m3)
Extra-heavy type (P>2.6t/m3)
Rope type: the rope grab relies on the wire rope to create a closed
force to achieve the purpose of grasping the material. The rope
grab is divided into single rope, double rope and four-rope grab.
Power grab: power grab through the load on the power unit and
the transmission device to open and close the jaw plate, such as:
electric grab, motor grab.
According to the number of jaw
plate, the grab can be divided into:
Double jaw plate grab
Multiple jaw plate grab
THANK YOU…