This document discusses setting the decimal point projection for temperature measurements using an RTD sensor. It explains that the positioning of the decimal point is set in the measuring mode menu under RTD - Pt. It also shows an example display format of "000000" or "00000.o" depending on where the decimal point is projected. The subsequent menu item then depends on the instrument equipment being used.
This document discusses setting the decimal point projection for temperature measurements using an RTD sensor. It explains that the positioning of the decimal point is set in the measuring mode menu under RTD - Pt. It also shows an example display format of "000000" or "00000.o" depending on where the decimal point is projected. The subsequent menu item then depends on the instrument equipment being used.
This document discusses setting the decimal point projection for temperature measurements using an RTD sensor. It explains that the positioning of the decimal point is set in the measuring mode menu under RTD - Pt. It also shows an example display format of "000000" or "00000.o" depending on where the decimal point is projected. The subsequent menu item then depends on the instrument equipment being used.