Professional Documents
Culture Documents
A) 6 AAA batteries
B) The EV3 accepts any of the sources listed above
C) 6 AA batteries
D) EV3 Rechargable DC Battery
2. What is Firmware?
A) Left Button
B) Center Button
C) Right Button
D) Top Button
A) Numbers 1, 2, 3, and 4
B) USB and PC Ports
C) Letters A, B, C, and D
D) Numerals I, II, III, and IV
7. Sensor (input) ports are identified using ______.
A) Numbers 1, 2, 3, and 4
B) USB and PC Ports
C) Numerals I, II, III, and IV
D) Letters A, B, C, and D
A) Press and hold the Left and Right buttons for 5 seconds
B) Press the Back button and hold it for 5 seconds
C) Press and hold both the Center button and Back button
D) Press the Center button
A) Press the Back button until a Shut Down dialog box appears, then selecting the check with
the Center button
B) Insert the Shut Down USB adapter into the USB port on the side of the EV3
C) Remove the rechargable Li-Ion battery pack
D) Press and hold the Left and Right buttons for 5 seconds
11. To run a program from the Run Recent menu, what do you do?
A) File Navigation (second tab) > Select the Project > Select the Program
B) Settings (fourth tab) > Brick Info > Recently Run, then use the center button to select
C) Brick Apps (third tab) > Port View > Select the motor or sensor that you just recently used to
run that program
D) Run Recent (first tab) > Select the program then press the center button
12. To run a program from the File Navigation menu, what do you do?
A) Brick Apps (third tab) > Port View > Select the project that is linked to available sensors and
motors
B) Settings (fourth tab) > Brick Info > Projects, then use the center button to select the
programs
C) Run Recent (first tab) > Select the program then press the center button
D) File Navigation (second tab) > Select the Project > Select the Program
13. How do you check the motor and sensor values on the EV3?
A) Plugging the EV3 into the computer and using the EV3 Software to check
B) Attaching a second screen adapter to the USB Port on the side of the EV3
C) Adding a block to display the motor/sensor value when running a program
D) Using the Brick Apps (third menu) > Port View > Select the motor or sensor you want to view
14. Where can you find the speaker volume and other settings on the EV3?
16. Which of the following connection types allows you to download programs onto the
robot?
A) Ethernet cable
B) USB cable
C) Power cable
17. Which of the following will help you navigate around a large program?
A) Click the comment tool to create a comment box, then type in the box to add a comment
B) Start typing on the keyboard and a comment will automatically appear
C) Right-click a box and select Add Comment
19. What does a robot's Program do?
Answer Key
1.A 2.B 3.C 4.B 5.B 6.C 7.A 8.D 9.A 10.D 11.D 12.D 13.D 14.A 15.A 16.B 17.C 1
8.A 19.C 20.C