Priority High Bulletin No. 001 Issue Date: Dec 23, 2003 Units All 1500/ 1700/ 1800 DH Grid Drawers Affected
1.0 Issue Description:
The current DH Grid drawer handles are not connected securely enough to the drawer assembly and they continually come apart.
2.0 Resolution Description:
Replace the entire faceplate assembly with the new version, which contains a new Grid drawer assembly. This requires the removal of the DH skins to allow access for removing the DH Faceplate. Any existing Upright DH currently has a vertically orientated drawer. This design no longer exists and is to be replaced by a RH Faceplate Assembly.
Bulletin No: Issued: 18/01/2021 Page 1 of 4
3.0 Materials and Tools Required:
Part No. Description Qty
740-0001-003 FACEPLATE ASSY - RH 1
Or 740-0002-003 FACEPLATE ASSY - LH 1
3.1 Tools Required:
“Drivers” for whatever the fasteners holding the skins on are. 2.5mm Allen Key, Ball end 3mm Allen Key, Ball end 4mm Allen Key, Ball end
4.0 Work Instructions:
Take off all of the existing DH Skins. There are various fasteners over the surface of the skins that need to be removed. Take off the existing DH faceplate, by removing 4x M5 fasteners from the backside of the “mate plate”. Install the new faceplate assembly, using the existing M5 fasteners. Place the DH skins back on the Dh itself, re-using the existing hardware.
Bulletin No: Issued: 18/01/2021 Page 2 of 4
Bulletin No: Issued: 18/01/2021 Page 3 of 4 Service Technical Bulletin Fax Back Receipt
Please Fax this form back to acknowledge receipt and implementation of