Professional Documents
Culture Documents
Active directory
Change the computer name to Server in the windows server 2008 (right-click My
Computer then Properties click Change settings then click Change then type Server
in Computer name)
Create an I.P address, Subnet Mask, Default Gateway, preferred DNS.
i. Type the following: ( I.P Address – 192.168.0.1 )
( Subnet Mask – 255.255.255.0 )
( Default Gateway – 192.168.0.254 )
( Preferred DNS – 192.168.0.1 )
( note: Uncheck TCP/IPv6)
Go to server manager
Click Add Roles then next
Check active directory domain services i – then click add required features – install
Close
Click start then type dcpromo.exe in search button
Next
Create
Type domain (tesda.org) next
Select windows server 2008 R2 – next – yes – next
Password (same your password in admin) – next – then click reboot on completion
(then it will reboot and start too long . then after starting, check the active directory
is created under roles in server manager.
DHCP Installation
Server manager – add roles - next
Roles – next
Check DHCP – next – next
Validate new IP – (your IP in the server – 192.168.0.1) then click validate
Next – next
Click add then in
Scope name = tesda
Starting IP = 192.168.0.1
Ending IP = 192.168.0.254
Subnet mask = 255.255.255.0
Default gateway = optional
Click ok – next – click disable
Next – next – install – close
Take note: if ever you cannot see the folder redirected in server you must repeat the process 4
and 5 and lastly reformat it if doesn’t happen.
Click server manager then click Features (left side) then click Add Features – then click
Window Server Backup features then click next – install – finish
Click start – click administrative tools – click window server backup – click backup ones
(left side)
Next – click custom then next – click Add items – click local disk C then click ok – next –
next – drop down select local drive D – next – click backup