You are on page 1of 7

7/29/2019 Student Test Report | TestMent

 / Report / Test Report

 Dashboard Test report of TEST - 15 Soil Mechanics (SM01)- GATE(CE)


(../studentpanel/page.php?
page=dashboard&view=overview)
Score Overview Subject wsie Question wise Time wise Compare with Toppers Solution Difficulty Level Rank

 My Tests Subject: CE
(../studentpanel/page.php? Language: English
page=product&view=product_list)

Q.1

 My Results Select the incorrect statement among following


(../studentpanel/page.php?
page=report&view=overall_report) The confined aquifer is bounded at the top and bottom by an impervious strata

The pressure of water in the confined aquifer is greater than the atmospheric pressure

✉ Message The aquifer is a fully saturated stratum.


(../studentpanel/page.php?
A tube well starts flowing by itself in a confined aquifer
page=message&view=message_list)
Solution

Not available for now!


 Documents
(../studentpanel/page.php?
page=doc&view=doc_list)
Correct

Your Ans d
 News & Updates
Correct Ans d
(../studentpanel/page.php?
page=news&view=news_list) Time (Secs) 35

 Bookmark

 Bookmarked
Q.2
Questions
(../studentpanel/page.php? The volume of water in a soil sample is 6 cm3. If the void ratio is 0.5 and volume of solids is 30 cm3. The degree of saturation of soil sample will be ________
page=bookmarkq&view=q_list) %.

Solution

Degree of saturation (S) =

Given : Vw = 6 cm3

Vs = 30 cm3

Void ratio, e = 0.5

e=

Vv = 0.5 × 30 = 15 cm3

S=

Correct

Your Ans 40

Correct Ans 39|41

Time (Secs) 73

 Bookmark

Q.3

Laterite is a _______ kind of soil.

Residual

Glacial

Alluvial

Marine

Solution

Residual soil.

Correct

Your Ans a

Correct Ans a

Time (Secs) 21

 Bookmark

Q.4

Soil profile below a lake is shown in figure. A piezometer installed in sand layer shows a reading of + 10 m. Assume that the piezometric head is uniform in
the sand layer the discharge through the silt layer is _______ × 10–7 m3/s/m2.

https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=38 1/7
7/29/2019 Student Test Report | TestMent

Solution

Discharge by Darcy equation, q = kiA

Hydraulic gradient, i =

So, q =

q = 5 × 10–7 m3/s/m2

Correct

Your Ans 5

Correct Ans 5

Time (Secs) 116

 Bookmark

Q.5

A soil has liquid limit = 35%, plastic limit = 20% shrinkage limit = 10% and natural moisture content = 40%. What will be the consistency index of soil?

0.33

0.67

–0.33

Solution

Consistency index (Ic)

Ic = [w = Natural water content]

= =

Ic = –0.33

Correct

Your Ans d

Correct Ans d

Time (Secs) 71

 Bookmark

Q.6

Which of the following statement(s) is/are correct?

1.% finer vs grain size graph will be a vertical line for uniform sand.

2.A gap-graded soil is also called a uniform soil.

3.Coefficient of uniformity is greater than 4 for well graded gravel.

4.The sedimentation analysis is useful for soil particles smaller than 75µ size.

1, 3 and 4 only

2, 3 and 4 only

1, 2 and 4 only

1 and 4 only

Solution

Not available for now!

Correct

Your Ans a

Correct Ans a

Time (Secs) 108

 Bookmark

Q.7

https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=38 2/7
7/29/2019 Student Test Report | TestMent
Consider the following statements regarding field identification of soil.

Statement-I : In dilatancy test, clay appearance doesn’t change on shaking & squeezing.

Statement-II : Crushing resistance of silty fine soil is more compared to clay soil.

Choose the correct option?

Only statement-I is correct

Only statement-II is correct

Both statements are correct

Both statements are incorrect

Solution

Not available for now!

InCorrect

Your Ans c

Correct Ans a

Time (Secs) 17

 Bookmark

Q.8

Data for Soil A and soil B is given below:

I.Which soil will be a better foundation material?

IIWhich soil has higher strength at plastic limit?

Codes:

Solution

i) Liquidity index ILA =

ILB =

ILB < ILA, Hence the soil B will have more stiff consistency than A

So Soil ‘B’ will be a better foundation material

ii) Toughness Index, IT =

ITA =

ITB = =

As (IT)B > (IT)A and we know toughness index indicates the strength of soil at plastic limit.

Hence soil ‘B’ has higher strength at plastic limit.

InCorrect

Your Ans d

Correct Ans c

Time (Secs) 193

 Bookmark

Q.9

A fine grained soil has liquid limit of 20% and plastic limit of 17%. According to IS classification the soil is represented by ______.

CL

ML-CL

ML

None of the above

Solution

https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=38 3/7
7/29/2019 Student Test Report | TestMent

InCorrect

Your Ans d

Correct Ans c

Time (Secs) 110

 Bookmark

Q.10

A glacial clay deposit contains a series of silt layers having mid point to mid point distance of 2m. If the silt layers are 50 mm in thickness and have a
permeability of one hundred time that of the clay. The ratio of the horizontal to vertical permeabilities of deposit will be __________. {Answer upto one decimal
point}

Solution

KH =

Where n = no. of such silt parting

KH = 3.475 K

Kv = =

Kv = 1.025 K

Unattempted

Your Ans

Correct Ans 3.2|3.5

Time (Secs) 126

 Bookmark

Q.11

A clayey soil has a moisture content of 15.8%. The specific gravity of solids is 2.72 and degree of saturation is 70.8%. The soil is allowed to absorb water and
after some time the degree of saturation increased to 90%. Then water content in soil will be___

20%

21%

18%

17%

Solution

S1e1 = w1G

e1 = = 0.607

Volume of voids remains same and therefore

So, e1 = e2

S2e2 = w2G

w2 =

w2 = 20%

Correct

Your Ans a

Correct Ans a

Time (Secs) 110

 Bookmark

Q.12

A borrow soil has a natural water content of 10% and a bulk unit weight of 18 kN/m3. The soil is used for an embankment to be compacted at 18% moisture
content. The amount of water to be added to 1 m3 of borrow soil is _______ kN. (Answer upto 1 decimal point).

Solution
https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=38 4/7
7/29/2019 Student Test Report | TestMent

Borrow soil

Dry density, =

=
kN/m3

= ; V = 1 m3

Weight of solids, ws = 16.36 kN

w=

0.1 =

Weight of water ww= 1.636 kN

Embankment

New water content, w =

0.18 =

Weight of water ww= 2.945 kN

Addition weight of water to be added = 2.945 – 1.636 = 1.30 kN

InCorrect

Your Ans 2.94

Correct Ans 1.2|1.4

Time (Secs) 205

 Bookmark

Q.13

A sample of sand has a volume of 1000 ml in its natural state. Its minimum volume when compacted is 840 ml. When gently poured in a measuring cylinder
its maximum volume is 1370 ml.

The relative density of sand will be ___%.

Solution

Dr =

= = 0.6981

Dr = 69.81%

Correct

Your Ans 69.81

Correct Ans 68|72

Time (Secs) 198

 Bookmark

Q.14

For the shown anisotropic soil profile under the dam

The equivalent coefficient of permeability assuming soil isotropic condition will be____ × 10–7 m/s [Answer upto 1 decimal point]

Solution

For isotropic soil condition

Keq =

kx =

https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=38 5/7
7/29/2019 Student Test Report | TestMent

kx =

kx = 3.667 × 10–7 m/sec

Ky = ;

ky =

ky = 3.461 ×10–7 m/sec

Equivalent coefficient of permeability, keq =

= 3.562 × 10–7 m/sec

Correct

Your Ans 3.66

Correct Ans 3.3|3.8

Time (Secs) 146

 Bookmark

Q.15

Consider the following statements for determining the liquid limit using Casagrande’s tool

1.At liquid limit all soil will have negligible shear strength,

2.The liquid limit of a soil sample is 33% when No. of blows required for the groove to close is 50 for a natural water content of 30% and its flow index value is
0.1

Which of the above statements is/are correct?

1 only

2 only

1 and 2

None

Solution

Flow index (If) = ; ;

wL = 0.30 + 0.1 × log102

wL = 33%

Correct

Your Ans c

Correct Ans c

Time (Secs) 94

 Bookmark

Q.16

Consider the following statements:

1.For determination of water content of all types of soil, the oven temperature is 110° ± 5°C.

2.The dry density is the bulk density of soil in dried condition.

3.The activity of a clay depends on nature of clay mineral

4.Soil sensitivity will be always greater than 1

Which of the above statement is/are incorrect?

1, 2 and 4 only

2 and 4 only

All of the above

1 and 4 only

Solution

For soil containing significant amount of organic soil drying temperature is 60–80°C.

In stiff clay having fissures sensitivity 1.

Correct

Your Ans d

Correct Ans d

Time (Secs) 24

 Bookmark

https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=38 6/7
7/29/2019 Student Test Report | TestMent

https://iesmaster.org/onlinetestseries/tm/studentpanel/page.php?page=report&view=test_report&test_id=38 7/7

You might also like