Professional Documents
Culture Documents
Industrial series
tank level indicators are easy to install,
and offer a economical solution where a reliable mechanical
liquid level indicator is required on bulk storage tanks oper-
ating under atmospheric or low pressure. The system is as-
sembled on-site, and installed to both new and existing tank
installations.
Pulley Elbow Cadmium plated steel with PTFE bush and stainless steel
shaft housed in weatherproof enclosure
Guide Wire Tensioners Cadmium plated steel spring housed in CS
Float Anchor 1 weldable SS304/SS316 plate 25mm x 6mm thick
Float cord fixings SS304/SS316
Additional Information to be provided by customer:
Range x service liquid x temperature x pressure. For Gauge brackets Powder coated steel
information on the CR LiquiLevel series of chemical Alarm (optional) Micro-switch - 5A 230 V in ABS enclosure (IP65)
resistant system, please contact our sales or technical
department.
.
MAIN COMPONENTS
Heavy duty powder coated steel gauge Powder coated steel spring tensioners for ten- Gauge Board brackets made from steel. Used for
board level indicator with nylon rollers for sioning guide wire for smooth operation of the both joining the brackets together and for fixing
smooth and accurate operation of the in- float. Flange PN20 x 3/4” BSP. Tension assembly gauge board back to storage tank.
dicator. fully enclosed for maximum protection.
Cadmium steel powder coated 90 degree Stainless steel 303 float complete with guide Gauge Boards in powder coated white alu-
pulley elbows complete with inspection wire lugs for guiding float up and down the minium profile with vinyl cut out calibrations
cover for maintenance and inspection. guide wire system for smooth accurate oper- in either metric or imperial. Pre drilled hole for
Connection size: 3/4” Other material avail- ation. mounting gauge board brackets.
able on request.
The LiquiLevel FB system operates accurately using stainless steel braided wire which is supplied with each system. BZP fasteners and full
instruction manual and user manual provided. Level switches can also be installed to the gauge board for switching of pumps, controls
and alarms.
Gauge Board Float (SS316 or SS304 or PP) Pointer Protection conduit with Elbow pulleys Seal pot
Rope Elbow Pulleys
guide
Rope connector
10 H.Limb
PP Rope
20 H
Knotted on V.Limb
30 float connector
L = 1 m tr
Seal
40 Flange pot
50
Tensioner Gauge bracket Anchor
60
SS (weldable)
70 SS Rope
Tension
Rope fastener spring
80 Knob L
Eyebolt for SS rope 115
90
Rope guide Flange L+50
150
Float Spring L= Float dia +100mm
LC = 5mm Tension rod
75 25
1"x1"x1/4"
MS Angle 110
Model Identification
FB: X Range
(mm)
Guided G
Unguided C
SS 304 x Ø200mm N1
SS 304 x Ø350mm N2
SS316 x Ø200mm S1
GUIDED CONSTRUCTION Fig. 2 GUIDED CONSTRUCTION Fig. 3
WITH FULL TRAVEL WITH HALF TRAVEL
SS316 x Ø350mm S2
PP x Ø200mm P1
PP x Ø350mm P2
50mm WC 1
200mm WC 2
Without w
Adjustable Microswitch x 1 1
Adjustable Microswitch x 2 2
Without w
Nikeson HB | Nitgatan 11 | SE-333 33 | Smålandsstenar | Sweden. Tel: ++46 371 390110. info@nikeson.co.uk. www.liquilevel.com