Professional Documents
Culture Documents
SSMC Wellhead System: Standard Snapring Modular Compact Wellhead
SSMC Wellhead System: Standard Snapring Modular Compact Wellhead
accommodate a variety of
• Reduced number of BOP connections.
• Minimum penetrations in wellhead, no lock screws.
casing programs and working
• Through BOP/diverter operations.
pressures, while using a
• Fast make-up connectors.
maximum number of inter-
• Mud returns via riser.
changeable components.
Rig Time Savings
The SSMC wellhead has many • Simple system installation.
technical advantages over a • Reduced number, faster BOP connections.
conventional wellhead system • Weldless diverter connection.
including: reduced height, Lower Maintenance
enhanced safety, savings in rig • Reliable, simple, field-proven design.
tubing hangers. • Wide range of tubing programs including single, dual and tension tubing hangers.
This modular design, with • Smaller workover BOP tubing hanger options available.
• Identical seal assemblies for each stage with either LS or MEC seals.
all internal components inter-
• Same internal components used on Cameron Conductor Sharing Wellhead (CSW™)
changeable throughout,
• Field proven for tieback to mudline.
means 30% fewer parts and
reduced inventories.
Time Savings Comparison (Conventional vs SSMC Wellhead)
Typical for 13-5/8”/20-3/4” System (30” x 20” x 13-3/8” x 9-5/8” x Tubing)
2
TC1277 Single Pages 7/15/99 9:16 AM Page 3
* LS Annulus Seal
(Casing Hanger)
20-3/4” Nominal
Casing Head Housing
13-5/8” Nominal
Compact Housing
Casing Hanger
Conductor Landing
* MEC Seals are Available as Alternate Ring
Seals on Casing and Tubing Hangers
30” Conductor
20” Casing
SD016814
10-3/4” Casing
Option
without 20” Casing Tubing
3
TC1277 Single Pages 7/15/99 9:16 AM Page 4
S e a l i n g Te c h n o l o g y
The ability of a wellhead to The SSMC wellhead offers a selection tool. The top face of the seal assembly
in sealing technology which increases serves as a landing shoulder for the next
withstand pressure is determined
versatility and ensures that the wellhead stage hanger.
in great part by the integrity of is adaptable for any production environ-
ment. S Seal
its sealing system. In addition,
Seals available for the SSMC seal The S seal is a one-piece elastomer inter-
the seals must be designed to assembly include LS elastomer seals and ference-type seal used as either an annu-
the popular, Cameron-exclusive Metal lus seal or tubing hanger neck seal. It
match the service application in
End-Cap (MEC) seal. uses continuous 316 stainless steel garter
which they are used. That is why An additional feature of the SSMC sys- springs molded into the two exposed
tem is the snapring lockdown incorporat- corners of the seal to prevent extrusion.
the Cameron SSMC wellhead
ed into all elastomeric seal assemblies and
LS Seal
system features a choice of tubing hangers.
The LS seal is a cost-effective, field-
The seal assembly is run on a threaded
elastomeric seals on seal proven, elastomer interference seal used
running tool that retains the snapring
as an annulus seal. The LS seal is a larger,
assemblies, and metal-to-metal until landed. Backing off the running tool
more robust version of the S seal and can
releases the snapring which is naturally
seals on tubing hanger necks. tolerate surface imperfections such as
biased to spring into the lock groove in
those caused by casing centralizers and
Seals available for the SSMC the housing. An overpull ensures the cor-
larger running clearances.
rect engagement of the seal assembly. The
include metal-to-metal seals in
seals are tested via a test port in the
primary sealing applications, and housing prior to retrieving the running
API 6FB fire specifications. All SSMC Wellhead Seal Selection Chart
elastomer seals are available in Seal Application Type
premium elastomer materials
S Seal Annulus Elastomer Seal with Stainless
developed by Cameron Elastomer Tubing Hanger Neck Steel Garter Springs
radial squeeze sealing method to SRL Seal Tubing Hanger Neck Metal Lip Seal
ensure wellhead dependability,
CF Gasket Between Connections Metal
extended service life and ease of
Note: All seals are radial interference design
applications.
4
TC1277 Single Pages 7/15/99 9:16 AM Page 5
S Seals MEC
LS Seals Seals
SRL Seals
T Seals CF Gasket
5
TC1277 Single Pages 7/15/99 9:16 AM Page 6
E m e r g e n c y E q u i p m e n t a n d To p C o n n e c t i o n s
Emergency Equipment
The SSMC wellhead includes a full
range of casing slip-based emergency
options, should the casing “stick” dur-
ing installation. With the split compact
wellhead, separating the upper and
lower sections allows conventional use
of slips and facilitates pipe cutting. In
the non-split wellhead, internal casing
cutters are used to prepare the casing
for the seal assembly.
FastLock™ Connector
FlangeLock™ Connector FastClamp™ Connector
The FastLock connector is designed
The FlangeLock connector is designed The FastClamp connector fits standard
as an efficient replacement for flanged
as a low cost connection for 5000 psi WP clamp hub profiles using conventional
connections on surface wellheads.
applications. It can be bolted directly API ring gaskets. FastClamp sections
Its low torque allows for fast make-up
onto FastLock connector hubs. This are pre-installed on the hub via the
and saves rig time. Typically, FastLock
allows for a smaller, more cost-effective guide rods to eliminate safety concerns
connectors would be installed on land
overall connection and provides maxi- in handling the sections during installa-
and platform BOP stacks taking full
mum flexibility for drilling and tion. Low make-up torque increases
advantage of the installation time sav-
workover operations. ease of installation.
ings offered by this unique design.
SD016220 SD016260
SD016259
6
TC1277 Single Pages 7/15/99 9:16 AM Page 7
Casing Hanger
SD016815
7
TC1277 Single Pages 7/15/99 9:16 AM Page 8
Western Hemisphere
Cameron
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
Eastern Hemisphere
Cooper Cameron (U.K.) Ltd.
5 Mondial Way
Harlington
Hayes UB3 5AR
Tel 44 181 9901800
Fax 44 181 9901888
http://www.camerondiv.com
Cameron, SSMC, CAMLAST, FastLock, FlangeLock and FastClamp are trademarks of the Cooper Cameron Corporation.
© Cooper Cameron Corporation, Cameron Division, Printed in USA, 7/99, TG/5M, WR10004/TC1277