You are on page 1of 2

SPARE PARTS

NOTICE
Services, Wärtsilä Netherlands B.V.
Engine section Engine type Ref. Date Issue Document No. Page
07 Piston D628 Services 24.11.2010 01 SN628/07/7004 1(2)

Piston with modified skirt


Engine type D628

Subject Introduction of a piston with a new type of skirt, applicable for engines with
compression ratio 1:11.7 and 1:13.

Background A piston with a redesigned skirt has been introduced to reduce the oil
consumption. This piston will be the latest standard for the D628.

The figures 1a and b show, as example, the old and modified piston for an
engine with compression ratio 1:13.

Fig. 1a Old piston Fig. 1b Modified piston

The old and modified piston can be used together inside of one installation.

Instruction The table below shows the conversion from “old” to “new” pistons. Depending
of the configuration of the installation the correct piston can be ordered.

Compression Old material New material


Description
ratio number number
Without APR;
1:11.7 4 piston rings
DZ04092407 PAAS000091
Without APR;
DZ04092826 PAAS000090
4 piston rings
Without APR;
1:13 3 piston rings
DZ04092822 PAAE198399
With APR;
DZ04094634 PAAE114800
3 piston rings

Wärtsilä Netherlands B.V. Office: Hanzelaan 95 Telephone: +31 38 425 32 53


P.O. Box 10608 8017 JE Zwolle Telefax: +31 38 422 35 64
8000 GB Zwolle The Netherlands service.sales.nl@wartsila.com
Services, Wärtsilä Netherlands B.V. Spare Parts Notice
Issue Document No. Page
01 SN628/07/7004 2(2)

Documentation Add this information to your engine specific parts catalogue.

Ordering parts Contact your closest Wärtsilä Services Network. When ordering please specify
the engine serial number and the material numbers.

Letter distribution The Wärtsilä Services Network and users/owners of engines concerned.

Feedback E-mail to: service.sales.nl@wartsila.com

Letter validity Until further notice.

Disclaimer
This Spare Parts Notice is designed to provide accurate and authoritative information with regard to the subject-matter covered as was
available at the time of printing. However, the publication deals with complicated technical matters suited only for specialists in the area and
the design of the subject-products is subject to regular improvements, modifications and changes. Consequently, Wärtsilä Netherlands B.V.
and/or any other Wärtsilä group company cannot accept any responsibility or liability for any eventual errors or omissions in this Spare Parts
Notice or for discrepancies arising from the features of any actual item in the respective product being different from those shown in this
Spare Parts Notice. Wärtsilä Netherlands B.V. and/or any other Wärtsilä group company shall under no circumstances be liable for any
damages or losses, or injury, suffered by any party making use of this Spare Parts Notice or the information contained herein.

You might also like